Question about using pastes

Stropping with linens and pastes has now become a regular part of my maintenance program with my razors. - and, it's working quite well! :)

I read once, a while back, that we need to clean the edge of our razor after we hone/strop with pastes. I do that. After using paste, I take a cotton ball, saturated with isopropyl alcohol, I brush/wipe lightly the edge at a 90 degree angle, 3 or 4 times. I then wipe/dry with tissue and start stropping. :)

Weather I am supposed to do this or not, everything is working just fine. :shrug: I'll continue to do this no matter what. I feel it's a good thing to do, and it feeds my OCD's.

Is this the accepted thing to do? :confused:

Steve

It would only be considered OCD if you cleaned the edge with above mentioned method, and then proceeded to inspect for cleanliness via microscope.

As it stands now, you are just nuts, not really crazy.;)

Quote:

---

Originally Posted by Seraphim

It would only be considered OCD if you cleaned the edge with above mentioned method, and then proceeded to inspect for cleanliness via microscope.

As it stands now, you are just nuts, not really crazy.;)

---

LOL, LOL, LOL!

.....and what makes you think I haven't done that? I just didn't think I needed to mention it. :o

I tend to use water to wipe the razor then I dry it off before stropping but other than that....

It's always necessary to clean off one grit before going to a smaller one. I clean between the 4000 and the 8000, the 8000 and my finishing stones or strops, and between my finisher and my hanging strop, I even wipe between the linen and the leather even though my linen isn't treated.

Quote:

---

Originally Posted by Wildtim

I even wipe between the linen and the leather even though my linen isn't treated.

---

Now you've really got me thinkin'!

In order it goes like this: 1" very soft linen, 2-1/2" TM's Genuine Linen, TM's 2-1/2" Red Latigo, then finish with TM's 2-1/2" #1 Horsehide

* I don't really feel the need to clean between these components. - unless one of you think I should. come on..... "Speak up!"

Does this mean I'm not as obsessive and compulsive as I thought?

I don't know man - two linens followed by two leathers? You're pushing the boundary there :p

If you start feeling the need to switch the lights on and off 20 times between passes, then you should worry I think. ;)

James.

Or, if while stropping, you find yourself counting like:

"Ah one two....buckle my shoe.... ah three-four...close the door...five six... pick up sticks...seven-eight...close the gate...nine-ten let's start again!"

Then you really shouldn't be playing with anything sharper than a crayon!:D

[QUOTE=zepplin;203764]Now you've really got me thinkin'!

In order it goes like this: 1" very soft linen, 2-1/2" TM's Genuine Linen, TM's 2-1/2" Red Latigo, then finish with TM's 2-1/2" #1 Horsehide

QUOTE]

Doesn't everyone do this? C'mon now... you all are holdin' back!

R U guys makin' fun of me? :roflmao:roflmao:roflmao

Well, whatever,.................things are workin' very well at this point and I'm gonna just keep on doin' what I've been doin'. :w

I might be wrong, but I haven't worried too much about cleaning the blade off between hones. I give it a quick wipe with a microfiber cloth, but that's mainly so I can visually inspect it without water droplets in the way.

When I use pyramids on a Norton, I don't worry about cleaning the blade between sides. :shrug:

As long as you're careful, cleaning the blade can't hurt, I guess. Not sure how necessary it is, though. :)

Josh

I just wipe off the grit from the stones, no real need to wash it or anything before proceeding. And as for strops, I keep pasted strops in the honing den and only clean strops in the shave den, minimizes my desire to use the pastes.

I don't see anything wrong with extra cleaning, even if it is unnecessary (between two clean strops?), just don't mix abrasives and your good to go.