Page 1 of 2 12 LastLast
Results 1 to 10 of 15
Like Tree10Likes

Thread: One of my blades has a nick on it, should I hone myself?

  1. #1
    Junior Member
    Join Date
    Mar 2014
    Location
    Mill Valley, California
    Posts
    5
    Thanked: 0

    Default One of my blades has a nick on it, should I hone myself?

    Hi everyone,

    I recently joined the world of straight razor shaving and I've been reading here quietly for a while. I can't tell you how much the information in this forum helped me and also how much I got sucked into this fascinating topic.

    Initially, I thought straight razor shaving would save me some money. However, after having ordered a couple of "initial" items (Dovo Best Quality 5/8, Wacker Jungmeister 7/8, 2 strops (one of exceptional quality from Lynn, thank you!), Golddachs shaving soap, Taylor of Old Bond Street Sandalwood Shaving Cream, Omega brush, Norton 4000/8000 waterstone, etc.), I now know that this will most likely be a long-term relationship with beautiful blades, aromatic smelling creams and soaps, and an exceptional shaving experience… I also learned very quickly how to order items so they wouldn't get delivered on days when my wife has a day off – I guess you know what I mean ;-)

    With that said, my Dovo blade got a nick on it close to the point (see photo below). And now I'm wondering whether I should hone/repair the blade myself or whether I should send it in. I was planning to hone it myself anyway and I already own the Norton 4000/8000. But this specific nick looks bigger than what a beginner might be able to fix. Any advice?

    Also, is there someone on this forum who lives close to me (Mill Valley, Marin County, California) and could help me with this?

    Thanks a lot in advance,

    Frank

    Name:  Dovo-blade-with-nick.jpg
Views: 912
Size:  33.0 KB

  2. #2
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    It looks like it will easily hone out to me. It is up to you whether you want to try honing out yourself or send it out.

    Bob
    Life is a terminal illness in the end

  3. The Following User Says Thank You to BobH For This Useful Post:

    fschulenburg (04-03-2014)

  4. #3
    Junior Member
    Join Date
    Mar 2014
    Location
    Mill Valley, California
    Posts
    5
    Thanked: 0

    Default

    Thanks a lot, Bob. Do you think I'll need a stone coarser than 4000 (e.g. 1000) or is the Norton 4000/8000 waterstone going to be sufficient in this case?

    Frank

  5. #4
    Senior Member blabbermouth eddy79's Avatar
    Join Date
    Feb 2013
    Location
    Gosnells Perth Western Australia
    Posts
    7,041
    Thanked: 656

    Default

    That is a very small nick and should come out easily. The 4k should be able to do the job and as you are just starting honing going a bit slower is probably better anyway. Try watching the vids by Gssixgun as he has a lot that go from bevel set up and that is where you are going to have to start. Good luck
    WadePatton likes this.
    My wife calls me......... Can you just use Ed

  6. The Following User Says Thank You to eddy79 For This Useful Post:

    fschulenburg (04-03-2014)

  7. #5
    Junior Member
    Join Date
    Mar 2014
    Location
    Mill Valley, California
    Posts
    5
    Thanked: 0

    Default

    Hey Ed, thanks a lot. That's super helpful for me to know. I just didn't want to ruin the blade and thought it would be better to ask here. I'll keep you in the loop on how it goes. Now, I ordered sandpaper to smoothen the Norton prior to using it for the first time. Anything else I should keep in mind when trying to fix the part with the nick?

  8. #6
    Not with my razor 🚫 SirStropalot's Avatar
    Join Date
    Oct 2011
    Posts
    1,859
    Thanked: 568

    Default

    Welcome to the forum, glad you've signed on!!

    Quote Originally Posted by fschulenburg View Post
    Anything else I should keep in mind when trying to fix the part with the nick?
    Yes, since you're new to honing and will be on the hone longer for that nick. Tape the spine. If you put uneven hone wear on the spine, that nick will seem as a flea bite. Also you're not just concentrating on the toe. You're honing the whole blade, like normal, until that nick is gone. If you concentrate on just the nick, or put extra pressure on just that part, you'll get an uneven edge. Hone the whole edge, the nick will go away as you hone the blade even.

    Here's a link to Glen's videos. http://m.youtube.com/results?desktop...l=1&sa=X&gl=US



    Regards,

    Howard

    This should help also....

    http://m.youtube.com/watch?v=vxrs5kF...%3Dvxrs5kFkmJg
    Last edited by SirStropalot; 04-03-2014 at 04:23 AM.
    JBPilot likes this.

  • The Following 2 Users Say Thank You to SirStropalot For This Useful Post:

    fschulenburg (04-04-2014), JBPilot (04-04-2014)

  • #7
    Chasing the Edge WadePatton's Avatar
    Join Date
    Aug 2012
    Location
    Middle Tennessee
    Posts
    920
    Thanked: 117

    Default

    Quote Originally Posted by fschulenburg View Post
    ... Anything else I should keep in mind when trying to fix the part with the nick?
    If i was fixin' it (in your shoes, and I am another student of the Idaho School): I'd tape the spine and use a marker to test my honing strokes-starting on the 4 or 8k. That way you don't burn a lot of blade just getting "oriented" and marker test is more accurate at finer grits. Once i had developed a way to evenly work the full edge, then I'd drop down to the 1000 and settle in for a long ride, of being diligent with strokes-checking now and then. It'll take a few (dozens), but don't even think of going back to 4k until the nick is completely (with magnification) gone and the bevel is sticky sharp end to end. Work on mixing up the various strokes and varying pressure and slurry. Then move to 4 and 8.

    If you focus on the nick, you'll start uneven wear on your blade. I'd try to remove the same amount heel to toe to keep proper original blade shape.

    Never tried sandpaper on the Nortons, I use the DMT coarse continuous 8", a/k/a 325. Be double dang sure to check for and eliminate any abrasive particles that my stick to the hones. But yes, flatten them out good that first time.
    Last edited by WadePatton; 04-03-2014 at 04:30 AM.
    Buttery Goodness is the Grail

  • #8
    The original Skolor and Gentileman. gugi's Avatar
    Join Date
    Aug 2007
    Posts
    17,410
    Thanked: 3906
    Blog Entries
    1

    Default

    Nah, that's not a 'small nick that will come out easily', esp. with your coarsest hone norton 4000.

    There are more issues with thee edge too, but that's the major one. Here's a pic to highlight some, but your whole edge is pretty serrated (make sure you dry the razor well and strop it well including the fabric component):
    Name:  Dovo-blade-with-nick.jpg
Views: 975
Size:  65.1 KB

    You can give it a try and see how it goes. Do 100 laps without slurry see your progress, then make slurry do 100 laps with it and see the progress again. That will give you some ideas how slow it is.

    Be careful with pressure too, you can't put back the steel, may be tape the spine to be on the safe side.

  • The Following User Says Thank You to gugi For This Useful Post:

    fschulenburg (04-04-2014)

  • #9
    Member
    Join Date
    Feb 2014
    Posts
    55
    Thanked: 2

    Default

    Hi Frank,

    Using Norton 4000 will take some time, but it's perfect for practice since you are just starting out. I do recommend that in the future, you should get a coarser stone, for example a 1k stone because it will set the bevel faster/remove metal quicker.

    Some 1k stones you may want to consider are: Naniwa SS 1k (SS stands for super stone), Naniwa Chosera 1k.

    Hope this helps!

  • The Following User Says Thank You to spacex For This Useful Post:

    fschulenburg (04-04-2014)

  • #10
    Junior Member
    Join Date
    Mar 2014
    Location
    Mill Valley, California
    Posts
    5
    Thanked: 0

    Default

    Thanks to all of you. I learned a lot since yesterday. Let me summarize it:

    * I'll have to improve my stropping skills and both strop with the linen and the leather;
    * it will take some time with the Norton 4000 to fix the edge, but it seems to be doable (and it might even be a good practice);
    * I should tape the spine; using a marker will help as well;
    * focusing on the nick would be wrong, as I'd like to get an evenly sharp edge;
    * flattening the stone prior to first use is good. However, sandpaper might not be the best solution and if I use it, I should double-check to remove residue on the stone;
    * buying a 1000 stone (preferred: Naniwa) could be a good idea in the near future.

    I watched the video and I found it very instructive. Having a beginner hone and then correct him is a smart idea :-)

    Thank you all. I'll get back to you once I have honed. That will most likely happen on the weekend.

    F.
    SirStropalot likes this.

  • Page 1 of 2 12 LastLast

    Tags for this Thread

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •