Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree8Likes

Thread: learning to lather

  1. #1
    Junior Member Newfie816's Avatar
    Join Date
    May 2014
    Location
    Trenton, Ontario, Canada
    Posts
    14
    Thanked: 0

    Default learning to lather

    Good morning,

    Newbie here in need of help. I am struggling with getting a good lather. Most people say to keep practising and building lather over and over with experimenting with water. The few times I have tried this I have been face lathering, but i find that after a couple attempts my face gets really irritated from the brush. I am using a Simpson Pure Badger. Is there a big difference in face lathering or using a bowl? Also, if I build a lather in a bowl how to i apply it to my face? Do I still use the brush?

    Aaron

  2. #2
      Lynn's Avatar
    Join Date
    May 2005
    Location
    St. Louis, Missouri, United States
    Posts
    8,454
    Thanked: 4941
    Blog Entries
    2

    Default

    Depending on whether you are using a soap or a cream, the principle is primarily to get the soap from the container to the brush. With creams, even the stiffer creams it usually is a little easier. Normally a small dollop of the creams will be enough. The Pure Badger can be a little more scritchy of a brush and if you use a lot of pressure to face lather, you can irritate sensitive skin.

    I find when using a soap, that it works best to soak or wet the brush and then shake off the excess water and start whisking the tips of the brush on the soap. Add a touch of water and whisk some more. Usually 4 or 5 times of doing this loads the soap onto the brush. The soap will usually tell you if a little more water is needed, but you don't want too much water as it makes the lather runny.

    If you use a bowl, just whisk the lather up in the bowl and keep building it with small touches of water when you are using either the creams or soaps. When you build up a nice amount of lather in the bowl, just paste is lightly on your face using the tips of the brush and you should get less irritation.

    Keep in mind that some soaps and creams provide different types of lathers. Some are thick and creamy and some are more thin. The key is to find one that you like which provides a nice glide for you when shaving and doesn't dry out quickly.

    Have fun.

  3. The Following 2 Users Say Thank You to Lynn For This Useful Post:

    Gonzo4str8rzrs (05-08-2014), Newfie816 (05-08-2014)

  4. #3
    Senior Member DarthLord's Avatar
    Join Date
    Sep 2013
    Location
    Collingswood, NJ
    Posts
    273
    Thanked: 36

    Default

    Quote Originally Posted by Newfie816 View Post
    Good morning,

    Newbie here in need of help. I am struggling with getting a good lather. Most people say to keep practising and building lather over and over with experimenting with water. The few times I have tried this I have been face lathering, but i find that after a couple attempts my face gets really irritated from the brush. I am using a Simpson Pure Badger. Is there a big difference in face lathering or using a bowl? Also, if I build a lather in a bowl how to i apply it to my face? Do I still use the brush?

    Aaron
    Hello, Aaron, and welcome to the SRP! You've come to the right place, sir.

    I would say that for practicing if you want to face lather, practice on your hand. Skin's tougher there and can stand up to it better.

    The difference between face and bowl lathering is that with face lathering you build the lather on your face which means the brush needs to be wetter. In bowl lathering you build the lather in a bowl which means you can start with a damp brush and add water to "dial it in" so to speak (you can tell which method I'd recommend for a beginner!). You can still apply bowl lather with a brush (I do!) or you can just scoop it up in your hand and smear it on. That's a big "what ever works for you" sort of question.

  5. The Following User Says Thank You to DarthLord For This Useful Post:

    Newfie816 (05-08-2014)

  6. #4
    Senior Member DarthLord's Avatar
    Join Date
    Sep 2013
    Location
    Collingswood, NJ
    Posts
    273
    Thanked: 36

    Default

    Quote Originally Posted by Lynn View Post
    Depending on whether you are using a soap or a cream, the principle is primarily to get the soap from the container to the brush. With creams, even the stiffer creams it usually is a little easier. Normally a small dollop of the creams will be enough. The Pure Badger can be a little more scritchy of a brush and if you use a lot of pressure to face lather, you can irritate sensitive skin.

    I find when using a soap, that it works best to soak or wet the brush and then shake off the excess water and start whisking the tips of the brush on the soap. Add a touch of water and whisk some more. Usually 4 or 5 times of doing this loads the soap onto the brush. The soap will usually tell you if a little more water is needed, but you don't want too much water as it makes the lather runny.

    If you use a bowl, just whisk the lather up in the bowl and keep building it with small touches of water when you are using either the creams or soaps. When you build up a nice amount of lather in the bowl, just paste is lightly on your face using the tips of the brush and you should get less irritation.

    Keep in mind that some soaps and creams provide different types of lathers. Some are thick and creamy and some are more thin. The key is to find one that you like which provides a nice glide for you when shaving and doesn't dry out quickly.

    Have fun.
    What he said!
    Haroldg48 likes this.

  7. #5
    Moderator Razorfeld's Avatar
    Join Date
    Jul 2013
    Location
    Forest Grove, Oregon
    Posts
    5,152
    Thanked: 1226

    Default

    Welcome to SARP, the ride of your life ahead. And ditto to what Lynn has said about building a usable lather. I spent an evening "wasting" small amounts of soaps and creams teaching myself what a good lather, for me, needs to look and feel like. Practice, practice, practice (despite emotional responses to what your childhood piano teacher always said, practice makes <almost> perfect).
    "The sharpening stones from time to time provide officers with gasoline."

  8. The Following User Says Thank You to Razorfeld For This Useful Post:

    Newfie816 (05-08-2014)

  9. #6
    Senior Member Siguy's Avatar
    Join Date
    Aug 2013
    Location
    Black Bear, NJ
    Posts
    1,672
    Thanked: 171

    Default

    Quote Originally Posted by Newfie816 View Post
    Good morning,
    The few times I have tried this I have been face lathering, but i find that after a couple attempts my face gets really irritated from the brush.
    Aaron
    Welcome, Aaron.

    I'm not going to repeat what's already been said, but if you're finding face lathering irritating to your skin. Stop. Shaving with an already irritated face is *not* a pleasant experience.

    I would say your skin has told you which lathering method would be better for you.

    Enjoy the journey. Read, Watch, Ask. Start with the stickies here created for beginners and great refreshers for others.
    dexter90723 likes this.

  10. The Following User Says Thank You to Siguy For This Useful Post:

    Newfie816 (05-08-2014)

  11. #7
    Senior Member Dzanda's Avatar
    Join Date
    Sep 2013
    Location
    Southeastern Virginia, USA
    Posts
    706
    Thanked: 155

    Default

    I haven't tried face lathering (I'm shaving around a beard, and using a bowl works great for me), and I mostly use creams, but I can certainly share your frustration! You can't go wrong with the advice that's already been given, but here's my 2¢ worth, based on personal experience:

    • I tended to start with my brush too wet at first, so my lather was always too loose. You can always add small (a few drops at a time) amounts of water to a developing lather, but you can't take it away!
    • Try "pumping" your brush (moving it up and down) in a bowl along with the swirling; I find that this gets things going much faster than only swirling the brush
    • Don't forget that you may have to modify your technique for the next soap or cream
    • Practice.. practice...practice
    • Have fun!
    Last edited by Dzanda; 05-08-2014 at 04:17 PM.

  12. The Following User Says Thank You to Dzanda For This Useful Post:

    Newfie816 (05-08-2014)

  13. #8
    Senior Member deepweeds's Avatar
    Join Date
    Apr 2006
    Location
    Evanston Illinois
    Posts
    656
    Thanked: 97

    Default

    Working in a bowl, I like to think of it as working the lather out of the brush, then back in, and repeat. I'll slap the brush against the sides to work it out (whack-a-whack-a-whack), then pump and swirl to work it back in. Add water or not based on results, and repeat a few times. For me, this keeps the lather building up. Good luck!
    Keep your pivot dry!

  14. The Following User Says Thank You to deepweeds For This Useful Post:

    Newfie816 (05-08-2014)

  15. #9
    Senior Member
    Join Date
    Oct 2011
    Posts
    155
    Thanked: 14

    Default

    what soap are you trying to lather? I would highly recommend palm olive cream/soap to a beginner.

    takes seconds to build a lather compared to some others ive used

  16. The Following User Says Thank You to shanky887614 For This Useful Post:

    Newfie816 (05-08-2014)

  17. #10
    Junior Member Newfie816's Avatar
    Join Date
    May 2014
    Location
    Trenton, Ontario, Canada
    Posts
    14
    Thanked: 0

    Default

    Shanky887614 - I'm using SRD non-scented soap with a Simpson Beaufort B4 Pure Badger brush. I have some TOBS Sandlewood and a Omega 637 Silvertip on the way.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •