Results 1 to 8 of 8
  1. #1
    Bay Rum Enthusiast
    Join Date
    Aug 2008
    Location
    Liberty, Texas
    Posts
    159
    Thanked: 9

    Default Polishing stone and/or pasted strop

    I've been "reading the mail" on you guys for a few days and this forum is great. My first post after having registered today.

    I've recently begun to try to shape up my Dubl Duck Gold Edge that I laid down about 30 years ago and haven't picked up since. I've managed to clean up the edge pretty well with my Norton 4k/8k but I want to use something a little finer before hitting the strop. I've read the honing forums and was overwelmed by the choices of polishing stones and strop pastes available.

    While I expect to add to my collection of stones in the near future, I am curious as to what the forum would recommend if I were to only have one stone/strop paste between the 8k and the leather.

    Thanks in advance.

  2. #2
    Senior Member SteveS's Avatar
    Join Date
    Mar 2007
    Location
    SF Bay Area
    Posts
    503
    Thanked: 11

    Default

    Quote Originally Posted by lawman2 View Post
    I am curious as to what the forum would recommend if I were to only have one stone/strop paste between the 8k and the leather.
    My vote is for a coticule. It's reasonably priced and puts a nice, smooth edge after the 8K Norton.

  3. #3
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,737
    Thanked: 5016
    Blog Entries
    4

    Default

    I would say either the coticule or a vintage Escher if you can find one. You could go the pasted strop route with diamond pastes and CrO but eventually you would have to go back to a hone anyway.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  4. #4
    Natty Boh dave5225's Avatar
    Join Date
    Mar 2007
    Posts
    1,462
    Thanked: 183

    Default

    I go to my Shapton 15k , after the 8k . After the 15k , I finish the edge on my Japanese Nakayama Asagi hone .
    Greetings , from Dundalk , Maryland . The place where normal people , fear to go .

  5. #5
    Bladesmith by Knight Adam G.'s Avatar
    Join Date
    Jun 2007
    Location
    Murrumba Downs, Queensland, Australia.
    Posts
    571
    Thanked: 203

    Default

    Welcome.
    Definitely the coticule IMHO. i find it much easier to use than a pasted strop and the result is an excellent polished edge.
    Information overload is definitely a risk here { as with all modern life }. There are myriad choices and people even go to the extreme lengths of 30K grit stones, etc. Just don't see/feel a difference between that and the progression i've been using. Easy to end uo with far more gear than you can really use. i use Norton 4/8K then finish on a coticule. After that, even a stropping before the first shave seems redundant. Simple stropping after that is good between shaves. Can't go paste a Tony Miller strop - as good as they get and great value for money.
    Anyhoo - just my thoughts.
    Adam.
    Respectfully,
    Adam.

  6. #6
    Coticule researcher
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,872
    Thanked: 1212

    Default

    I'm afraid that's an impossible question to answer.
    I believe it all highly depends on a few very personal factors:
    1. How tough is your beard?
    Some beards need ultimate sharpness above all else. Other people's whiskers get severed a fair bit easier.

    2. How sensitive is your skin?
    Some people need a smooth edge above all else. Other people's skin can stand a more aggressive edge.

    3. Personal shave style.
    Some people scythe barely above their skin with an ultra-keen razor, while others like to bare down just a bit more, with a slightly steeper shaving angle. This induces different requirements for the type of razor and the type of edge.

    4. Longevity of an edge.
    Some people like ultra-sharp edges and don't mind paying that with more frequent honing. Other people like a decent edge that lasts a few months.

    That said:
    Coticules add superior smoothness to any edge.

    The Shapton 16K gives an ultra-sharp edge, with some aggressiveness.

    A strop with Chromium Oxide can add smoothness to an edge and, if you don't mind convexing the cutting bevel a bit, also additional keenness. The latter is a bit unpredictable, 'cause it depends on how well you can keep consistent flex and /or pressure on a strop, and it's nearly impossible to touch-up a once convexed edge without a fair amount of honing.

    Nakayamas are reported by those how are able to afford one to be the "nec plus ultra" if you want the sharpness of a good Chromium Oxide edge, without the downsides.

    I'm sure others will add more choices.
    In the end you'll have to still find out for yourself.
    I believe a Coticule would be the best starting point.

    Best regards,
    Bart.

  7. #7
    JAS eTea, LLC netsurfr's Avatar
    Join Date
    Sep 2006
    Location
    Burke, VA USA
    Posts
    1,301
    Thanked: 110

    Default

    Nice writeup there, Bart. Very thorough.

    I would throw my vote in the hat for a yellow coticule. Howard at The Perfect Edge has a nice selection at reasonable prices.

  8. #8
    Troublemaker
    Join Date
    Apr 2008
    Location
    Modena, Italy
    Posts
    901
    Thanked: 271

    Default

    Quote Originally Posted by netsurfr View Post
    Nice writeup there, Bart. Very thorough.

    I would throw my vote in the hat for a yellow coticule. Howard at The Perfect Edge has a nice selection at reasonable prices.
    +1 to that. After the coticule I go to a 4-sided paddle strop with Dovo Red, Dovo Black, Chromium Oxide and 0.25 micron Diamond Paste. It's probably overkill but I'm in the tough-beard, ultra-sharp and smooth category and this progression gives me incredibly great shaves.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •