How can you tell if your blade is sharp?

I saw this one video on you tube where the guy sliced off a strand of hair he was holding. I tried it but I just can't get the same effect :-)

Anyhow, I think my stropping skills need to be improved because I can't get a smooth glide when going against the grain around my chin. As far as my stropping technique, I've watched quite a few videos on youtube. I do about 20 cycles every time before I shave. Holding the strop tight with a light stroke of the blade up and down, and flipping it on its spine.

Questions:

1. How do you test to know your blade is the sharpest it can be?

2. How many times do you run the blade on the strop before you shave?

3. When do you use the stropping paste?

4. When do you use the linen side of a two-sided strop?

Thanks!

The HHT (hanging hair test) never worked for me either. I've heard of wetting your nail and dragging the blade across it but couldn't figure that one out either. The way I tell is just by shaving with it, lol. It would be nice to have a reliable way to know how sharp my blade was though.

Quote:

---

Originally Posted by jdizzle707

I saw this one video on you tube where the guy sliced off a strand of hair he was holding. I tried it but I just can't get the same effect :-)

---

Took me a bit to figure that one out too. I hold a hair from my girlfriend's brush between my left thumb and forefinger, and simply move the blade through it, like chopping wood but very slowly, and if I've stropped properly, the hair simply pops off when the blade touches it.

Quote:

---

Originally Posted by jdizzle707

I do about 20 cycles every time before I shave. Holding the strop tight with a light stroke of the blade up and down, and flipping it on its spine.

---

Your technique sounds fine, but 20 is probably not nearly enough. I do 60, and so do a lot of other folks around here. It really doesn't take long at all once you get the feel for it.

Quote:

---

Originally Posted by jdizzle707

1. How do you test to know your blade is the sharpest it can be?

---

That's not really relevant. You don't want it to be the sharpest it can be, you want it the right sharpness, and while the HHT is a good indication, there's only one absolutely fool proof way to tell that I know, and that's to shave with it.

You can save your face by shaving a patch of your forearm. The hair is softer, but at least it will give you a good idea.

Quote:

---

Originally Posted by jdizzle707

2. How many times do you run the blade on the strop before you shave?

---

20 laps on the canvas, 60 on the leather before every shave. 10 on the canvas after I shave.

Quote:

---

Originally Posted by jdizzle707

3. When do you use the stropping paste?

---

There's 4 basic kinds of stropping paste. Dovo sells them as yellow, white, red and green.

Yellow is strictly a leather conditioner, and should be used whenever your leather strop starts to feel too dry and/or rough.

White is a chalk paste which has a very mild polishing effect. Some people like to use this on their canvas strop.

Red is a mild abrasive paste, and is used to refresh an edge that has been used. How often depends on your personal preference, the quality of your razor, and your skill in shaving.

Green is an abrasive honing paste. It won't hone a dull edge, but many people like to use it as a final step in the honing process. This is a subject of debate that I'm not qualified to give an opinion on.

Quote:

---

Originally Posted by jdizzle707

4. When do you use the linen side of a two-sided strop?

---

Already answered that one.

Two other things to mention.

1. There is a HUGE amount of information in the wiki. (link at the top of the page). If you're asking these questions, I would really encourage you to read more in the wiki. There's great stuff in there.

2. The tumb nail test should only be used to test a razor in the early stages of honing to check for micro chips in the bevel. Performing the TNT with a hones razor is not only very dangerous, but will probably do enough damage to the edge that it needs to be honed again. Razors are meant for shaving hair, not slicing thumbnails. YMMV

You might find the following Wiki articles useful:

• Sharpness tests explained - Straight Razor Place Wiki
• Finishing Pastes - Straight Razor Place Wiki
• Razor stropping - Straight Razor Place Wiki

#1 and only true test is the shave test. However, as a newbie, you don't exactly have the shaving technique down so...thats not so good for new shavers.

My second line test is the arm hair test. I attemp to cut off a single hair, if I it pulls, not ready. If I move the blade and nothing happens, then when I lift the blade I notice that the hair was sliced so cleanly through that the hair just hung on the blade...its ready.

More recently, I've been using the HHT and floating leg hair test as well. Thanks to...Bart? I can now get consistent results with the HHT. The key was to wet the hair. Or maybe my honing has gotten better. Probably both.

Clarification here since it is NOT in the Wiki

Dovo pastes

Green = 5-8 micron very aggressive

Red = 3-5 micron aggressive

Black = 1-3 micron medium

White = Linen conditioner actually abrasive quantity is unknown

Yellow = Leather conditioner only

(Dovo micron sizes do NOT relate directly to Diamond micron sizes Dovo pastes are a milder abrasive)

The other green paste is .50 CrO2 Chrome-Oxide which is used as a final paste by many after honing There are differences in the quality of many of the Chrome Ox pastes.... WATCH the stuff made into bars

Diamond paste ranges from 20 micron down to .10 that I have personally seen, there might be more....

Quote:

---

Originally Posted by jdizzle707

I saw this one video on you tube where the guy sliced off a strand of hair he was holding. I tried it but I just can't get the same effect :-)

Anyhow, I think my stropping skills need to be improved because I can't get a smooth glide when going against the grain around my chin. As far as my stropping technique, I've watched quite a few videos on youtube. I do about 20 cycles every time before I shave. Holding the strop tight with a light stroke of the blade up and down, and flipping it on its spine.

Questions:

1. How do you test to know your blade is the sharpest it can be?

2. How many times do you run the blade on the strop before you shave?

3. When do you use the stropping paste?

4. When do you use the linen side of a two-sided strop?

Thanks!

---

The real answer to the question of tests is this .....

Sharpness test are for people that hone razors, to be used as we hone them to make sure we are hitting the levels of sharpness through the honing process... and even then they are subjective

Doing all those tests... Dulls the edge... why do you think we follow a test with a few laps on the hones...

Many of your other questions have been answered already....

Here is the best test for a new straight user... that I can think of

Lather up and shave one smooth perfect stroke from the sideburn to the jawline... Stop and rinse, feel that one spot is it smooth??? then you are probably OK....
The other tests are not all that reliable, honestly I can pop arm hairs at 1k in the honing process but I ain't shaving with that edge... Some of us can pass an HHT at the same level but again I ain't shaving that edge on MY face......

Just to make myself very very clear,, A TNT WILL dull the shaving edge...
Using the TPT WILL dull the shaving edge....
The HHT IS NOT a reliable sharpness test..... Unless you have made it into one through quantitative testing...

Quote:

---

Originally Posted by gssixgun

Clarification here since it is NOT in the Wiki

---

Fixed, I hope: Finishing Pastes - Straight Razor Place Wiki

Feel free to amend and enhance.

#1. I shave with it. If the shave is comfortable, then the blade is sharp enough. To me that's the only real test.

#2. 20 on linen. 12 - 15 on Latigo. 12 - 15 on horsehide.

#3. I don't use stropping paste, but if it works for you.....

# 4. I use the linen before every shave.

As always, after I posted my questions, I ended up reading the wiki here and also at classicshaving.com. Its also interesting to read input from fellow members of the board. Im nearing the 36 hr period when I have to shave again to I'll give it a shot tonight! :-)

I'm brand new to SR and was wondering the same thing about the HHT..Thanks everyone

1. How do you test to know your blade is the sharpest it can be?

I use the shave test, as my HHT is unreliable.

2. How many times do you run the blade on the strop before you shave?

Usually 50 laps (1 lap is up and down the strop), but I have a str8 that needs 100 laps on the leather.

3. When do you use the stropping paste?

I got some CrO 0.5 micron from ChrisL and put it on a block of balsa. When a razor starts to pull uncomfortably on ATG, I give it 5 laps on my CrO balsa paddle and the pull goes away. When the CrO doesn't restore the edge, it's time for a touch-up hone.

4. When do you use the linen side of a two-sided strop?

I give 40-50 laps on unpasted linen before I strop on the leather.

:gl:

I could never get the HHT to work. On my third week of bad shaving, I decided to grab the brand new Atra and clean up my remaining stubble. It shaved so nicely! I had never used it as it came free with my brush and I am transitioning from electric to straight. I then decided that the razor I was using was NOT sharp. Since I ordered this shave ready, I then started to question my stropping. After revisiting the stropping technique here is what I found out.

- Stropping does matter!!!
- Bad stropping dulls the blade.
- The sharpness may be recovered from good stropping.
- A slightly curved strop means little blade contact. (across the width)

I decided to slowly strop on the linen side, watching the edge and making sure I did it right and with NO pressure. I switched to the leather side and saw the strop was curved. I then worked it over, bending it LIGHTLY to get something that was more flat. I did the same on this side. I found my left hand liked to loosen the strap and so I kept needing to retighten it. The right hand was ever so loose. After doing this process about 200 times each side (blocks of 50/50), I can now pass the HHT at the heal of the blade and almost pass it near the toe. At the toe, it will cut, but then peel.

*** HHT works!
*** Good stropping matters!!

Good luck.