learning to strop

hi everyone,

i just joined this forum because i find myself on it everyday. i've been wet shaving for only about a month or two, starting with a Parker SR1 Stainless Steel Straight Edge Razor. it's a cheap $20 shavette with disposable blades. i recently bought a Dovo "Special" Imitation Tortoiseshell, Full Hollow Carbon Steel, 5/8" and i just got a chance to use it. however, it didn't seem sharp enough when i was using it even though it was factory honed. i got a Dovo Russian Leather Strop, 15 3/4" with it as well. one side is soft leather and the other side is a linen type material. i know i'm supposed to use the leather side, but do i use the linen side too? thanks in advance to everyone who provides assistance.


Dovo Russian Leather Strop, 15 3/4":
Dovo Russian Leather Strop, 15 3/4"
- in the description it explains the linen side

also, let me know if i need to be more specific in any of my descriptions; i'm new here.

Welcome... a factory honed Dovo will benefit from a professional hone (I speak from experience) the strop will help you keep the blade in good shape, you will use both sides, start with the linen and finish with the leather. You will find plenty of information on the Wiki (the link is at the top of the page)... and feel free to ask more questions, that is how most of us learn.

Your factory-honed Dovo is not ready to shave. You need to get it honed by a professional. I suggest sending it to Straight Razor Designs. It costs about $20.
When they come from the factory they are sharpened enough to form a bevel on the blade, but not sharp enough to shave. I started shaving with a factory sharpened Dovo, and it nearly tore my face off, until I got it properly sharpened.
While it's away getting sharpened, check out the wiki on this site for tips on stropping and maintaining a good edge. It can be done pretty cheaply, check the wiki. You'll need to send it off to get it honed about twice a year, unless you learn to hone it yourself. It's not rocket science, but it does take some practice to develop the feel for it. I recommend getting a cheapo blade from ebay to practice with while you learn.

thanks for the advice.
yeah, i noticed that there was a lot of pulling and tugging when i was shaving with it for the first time. also, when i finished shaving, i realized i didn't cut myself at all; so i guess the razor isn't sharp enough after all.
is it absolutely necessary to get it professionally honed before using the razor again?

Yeah. Unless you bought it from a reputable dealer like SRD or Classic Shaving (and payed extra for the honing from CS) then it's never going to shave well until it has a proper edge on it. Believe me, it's worth the wait. And again, while you're waiting for it to come back (it'll take about a week in the mail, I guess) check out the wiki on stropping and razor use, so that you hold it at the proper angle while shaving and so you also don't roll the edge over while stropping and dull your newly sharpened razor.
You have a very nice razor, but it will never shave well until you get it sharpened.

Ummm...yes.
I would not shave with that until it has been honed. If you post your location you may be able to find someone close by to minimize time away from your new razor as well as a mentor to assist you with technique.

Everyone hear has the right advise! I have a dovo 5/8 too, and a pro hone is the way to go. I got mine honed about 6 months ago, and it still shaves great! Spend the $20 and save yourself a lot of time and pain. I also purchased a barbers hone on the classifieds here to keep my razor in check, and I'm sure it's already paid for itself. I reccomend doing the same if this is something you plan on doing for more than a few months. Good luck!

You have a great razor, but it MUST be properly honed to give you the service you deserve. As to the strop, also a great one. Practice on it with a butter knife, yes a butter knife. That way you will avoid cutting it as you learn how to properly use a strop. Hand rub your leather strop brfore you put a blade to it. The friction of your hand will raise the temperature of the leather and will increase its draw. Take your time as you strop. And have fun doing all of this.

:D

thanks for all the advice. i called a local Art of Shaving store this afternoon in north jersey, where i'm from. they don't hone razors there, but they recommended i go to Henry Westpfal & Co in chelsea, nyc to get it professionally sharpened. i'll probably give them a call tomorrow to see how quick they can do it.
has anyone ever had their razor sharpened at Henry Westpfal?

YouTube - straight razor stropping

This vid helped me a lot!

Hi,

+1 on coldcuts' suggestion of Shams' most excellent video :)

One of the best videos on stropping I have ever seen.

Have fun !

Best regards

Russ

Sorry, can't help you with that honing service. I'm in Texas and I hone my own. But if AOS recommends them, they're probably good. You could check to see if they have any reviews on yelp.com

alright so i dropped off the razor at Henry Westpfal in nyc this morning, and they had a few razors out so it seems like they know what they're doing. thanks everyone for the advice and helping me figure out how to solve my dilemma.

I have a razor that I definitely need to get professionally honed because I'm just starting out.
I live in Canada so I'm just wondering if I can ship it to SRD or if there's somewhere in Canada that does professional honing?
Any help is appreciated!
Thanks!

Straight Razor Design ships their razors professionally honed. That is where I bought my Dovo. It shaves great. Factory honed razors just won't give a good shave. I also bought another razor from the classifieds on this sight. It too was honed to perfection. Until you (and I) get experienced at honing our own razors getting them professionally honed is the only way to go.

Look on the Straight Razor Design website for instructions. You can send a razor to them for honing.

I'm not familiar with Henry Westpfal but in the future I would suggest looking in the classifieds on this forum for someone to hone your razor. While there are other options out there you never know what you're getting. Someone who hones kitchen or pocket knives probably doesn't put the perfect edge on a razor like the guys here can (if they put an edge on it at all).

I just say this from what I've read but it sucks to go through all of these hassles when you first begin, it can really be a turnoff. The classifieds here and the recommended vendors here are always a good choice over an outside source.