Page 1 of 2 12 LastLast
Results 1 to 10 of 14
Like Tree19Likes

Thread: How sharp is sharp?

  1. #1
    Junior Member
    Join Date
    Nov 2012
    Posts
    3
    Thanked: 0

    Default How sharp is sharp?

    Hello all, I just started using a straight razor yesterday. I had been interested in getting in to straights, but then I found out that my dad had tried them out a couple of decades ago and found that he didn't like them. So he gave me his old razors. The blades do hit the handles when closing sometimes, and the handles appear to be slightly warped, but the blades seem to be high quality, and the brand was listed among the "good razors" section here. So far I'm pretty impressed with straights (I did cut myself a few times, but I'm learning), and I think I'll be switching over to them from now on. My question is, how do I know that the razors are sharp enough? I keep reading about the difference between factory edges and "shave ready" razors, but what indicators can I use to test sharpness? I sharpened these with Edgepro stones and tapes (a sharpening system I use to put polished edges on pocket knives), and they seem pretty damn sharp. But I'd like to hear what a true enthusiast considers to be sharp enough. Thanks in advance!

    A pic of the razors I received:
    Geezer likes this.

  2. #2
    There is no charge for Awesomeness Jimbo's Avatar
    Join Date
    Aug 2006
    Location
    Maleny, Australia
    Posts
    7,977
    Thanked: 1587
    Blog Entries
    3

    Default

    Sharp is a relative term and very hard to explain in words. The gold standard would be to have one of your razors sharpened by a pro honer so you could compare for yourself, rather than trying to interpret what people try to explain to you here on the forum. That's my best advice - I now turn you over to people who are better equipped to explain what shave-ready means in words.

    Good luck, and welcome to SRP

    James.
    ScottGoodman likes this.
    <This signature intentionally left blank>

  3. #3
    Member AFDavis11's Avatar
    Join Date
    May 2005
    Location
    Virginia
    Posts
    5,726
    Thanked: 1486

    Default

    a lot of people think of sharpness as some mystery, although they have plenty of experience with the sensation of moving a sharp blade down their face from other razors. The sensation should be very similar. For most people this means a realization that their straight is in fact, dull, by comparison.

  4. #4
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,736
    Thanked: 5016
    Blog Entries
    4

    Default

    What is proper sharp? To me it means when the razor slides down your face you feel...absolutely nothing, and the whiskers are totally gone. You might hear some feedback depending on the grind but if you can feel the razor working on your face it can use some work.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  5. #5
    Senior Member Mike12345's Avatar
    Join Date
    Oct 2012
    Location
    Deep South
    Posts
    227
    Thanked: 29

    Default

    First, congrats on the razors. Your dad had exquisite taste in straight razors. Both are of very high quality.
    I'll add my voice here to those who recommend a pro hone your razors. There is no way a straight noob can know what shave ready sharp feels like.
    earcutter likes this.

  6. #6
    ace
    ace is offline
    Senior Member blabbermouth ace's Avatar
    Join Date
    Dec 2010
    Location
    Virginia
    Posts
    3,362
    Thanked: 581

    Default

    Generally, when you find yourself wondering whether a blade is shave ready it probably isn't. When you shave and get great results with minimal effort, you have just shaved with a shave ready razor.

  7. #7
    Seeking Shaving Zen Prahston's Avatar
    Join Date
    Aug 2012
    Location
    Yakima, WA
    Posts
    825
    Thanked: 132

    Default

    When I first started straight shaving I honed my own razor using the same process I used (Spyderco Sharpmaker) for knives plus stropping on an old belt pasted with Flitz and I 'could' shave but it was not particularly comfortable. I had nothing else to compare to so the two things I did to figure it all out were:

    1) Pick up a razor from the Classifieds here.
    2) Grab a $20 portable microscope from Radio Shack.

    When I shaved with the razor I got from the classifieds it was smooth and I did not have to back up and go over spots like I did from my hone. From looking with the naked eye I could see no difference. However, under Mag I could see that the Classified's Razor was truly smooth and shiny with a very even edge and bevel. Comparatively, my hone job had a good bevel but the edge appeared ragged/toothy in comparison.

    I am still fine tuning my process but I can now get my edge as sharp as those I've purchased. But, I am still always learning something new nearly every time I log on here!
    ScottGoodman likes this.

  8. #8
    The Great & Powerful Oz onimaru55's Avatar
    Join Date
    May 2008
    Location
    Bodalla, NSW
    Posts
    15,595
    Thanked: 3747

    Default

    Quote Originally Posted by Tsujigiri View Post
    The blades do hit the handles when closing sometimes, and the handles appear to be slightly warped, but the blades seem to be high quality, and the brand was listed among the "good razors" section here. So far I'm pretty impressed with straights (I did cut myself a few times, but I'm learning), and I think I'll be switching over to them from now on. My question is, how do I know that the razors are sharp enough? I keep reading about the difference between factory edges and "shave ready" razors, but what indicators
    "sharp enough" is indeed a relative term but bigspendur gave a pretty good description.
    btw, the bits that touched the scales are no longer sharp.
    nun2sharp and earcutter like this.
    “The white gleam of swords, not the black ink of books, clears doubts and uncertainties and bleak outlooks.”

  9. #9
    lobeless earcutter's Avatar
    Join Date
    Feb 2012
    Location
    Kansas
    Posts
    4,864
    Thanked: 762

    Default

    Quote Originally Posted by thebigspendur View Post
    What is proper sharp? To me it means when the razor slides down your face you feel...absolutely nothing, and the whiskers are totally gone. You might hear some feedback depending on the grind but if you can feel the razor working on your face it can use some work.
    Best description ever!
    jaswarb likes this.
    David

  10. #10
    Fatty Boom Boom WW243's Avatar
    Join Date
    Jul 2012
    Location
    Rockville
    Posts
    3,258
    Thanked: 638

    Default

    I have been thinking of this a lot recently, also being new to the straight razor. I agree completely that a baseline of shave ready needs to be established by a pro but, and this has been said before, a professionally honed razor in the hands of a new user will provide mixed results. I actually think now that the thumb pad test is possibly more useful than evaluating the actual first shaves. For reasons too common to mention, I have already had to touch up my professionally honed razor after a couple of dozen shaves. The thumb pad is so much simpler than the face. Do you think there is anything to this?

    Quote Originally Posted by Jimbo View Post
    Sharp is a relative term and very hard to explain in words. The gold standard would be to have one of your razors sharpened by a pro honer so you could compare for yourself, rather than trying to interpret what people try to explain to you here on the forum. That's my best advice - I now turn you over to people who are better equipped to explain what shave-ready means in words.

    Good luck, and welcome to SRP

    James.
    Last edited by WW243; 11-05-2012 at 04:53 PM.
    "Call me Ishmael"
    CUTS LANE WOOL HAIR LIKE A Saus-AGE!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •