Results 1 to 9 of 9
Like Tree4Likes
  • 1 Post By ljhblues
  • 1 Post By ljhblues
  • 1 Post By ironsidegnr
  • 1 Post By ironsidegnr

Thread: 1st Naniwa 12000 lap & hone

  1. #1
    Junior Member
    Join Date
    Oct 2012
    Location
    Coachella Valley, Ca.
    Posts
    17
    Thanked: 2

    Default 1st Naniwa 12000 lap & hone

    Howdy all,

    Well my 1st lapping experience, my Naniwa 12000. The stone was crowned in the middle. I used my DMT 8-C, it worked great. The pencil marks disappeared just like all the vids showed. I ended-up holding the two stones and rubbing them together under water ( small sinks). I honed my DOVE, BEST Q. on it. I watched the water along the edge, like Lynn showed in his DVD. The hair popping want great. I'm going to follow gssixgun video for lapping my Norton 4/8. I hope at goes alright. Again everyone's advice is truely appriciated.

    ljhblues
    saitou likes this.

  2. #2
    Senior Member
    Join Date
    Aug 2012
    Location
    Sacramento, CA
    Posts
    235
    Thanked: 8

    Default

    I've had great luck w/ my Naniwa 12K as well. Glad you're off to a good start.

  3. #3
    Senior Member
    Join Date
    Dec 2012
    Location
    Melbourne, VIC, Australia
    Posts
    352
    Thanked: 28

    Default

    I'm waiting for my Naniwa stones to arrive and I was pretty much decided on ordering the DMT8c as well, thanks for the extra feedback I think i'll put in my order now

  4. #4
    Junior Member
    Join Date
    Oct 2012
    Location
    Coachella Valley, Ca.
    Posts
    17
    Thanked: 2

    Default

    saitou,
    Thanks for the reply. The DMT 8-C is a real good lapping stone. I found I had to lap the Naniwa twice. I didn't use much pressure lapping. I'll find out how good I honed my DOVO when I shave this mourning.
    ljhblues
    saitou likes this.

  5. #5
    Junior Member
    Join Date
    Oct 2012
    Location
    Coachella Valley, Ca.
    Posts
    17
    Thanked: 2

    Default

    Hey mumpig,
    I sent you a thank you I wonder why it didn't show-up? Anyway if you use the Naniwas for a complete dull to shave ready would you let me know which stones you use?
    Thanx, ljhblues

  6. #6
    Senior Member ironsidegnr's Avatar
    Join Date
    Sep 2011
    Location
    Nova Scotia
    Posts
    265
    Thanked: 30

    Default

    I know you didn't ask me, but I'll answer anyways.

    I use only Naniwas, and I hone from 'spoon sharp' to shave ready with a 1k, 5k, 8k, 12k progression.
    75% of my time is spent on the 1k if I'm honing from completely dull.


    I usually finish with 10 laps on CrOx or Cbn to smooth everything out. Works great!
    saitou likes this.
    Through the mud and the blood, to the green fields beyond.

  7. #7
    Junior Member
    Join Date
    Oct 2012
    Location
    Coachella Valley, Ca.
    Posts
    17
    Thanked: 2

    Default

    Hey ironsidegnr,
    Thank you for the info. I'm thinking on getting the 1k, 5k and 8k as well. Just wondering do you use Lynn's circle honing for setting the bevel?
    ljhblues

  8. #8
    Senior Member ironsidegnr's Avatar
    Join Date
    Sep 2011
    Location
    Nova Scotia
    Posts
    265
    Thanked: 30

    Default

    Absolutely!

    I use heavy cicrles on the 1K that progress slowly up to no pressure. Then I end with X-strokes.
    I repeat this for the 5 and 8K as well.
    At the end of the 8K I still check the edge on my leg hair to make sure it pops from heel to toe. If not, this is where I do touch ups.

    Then on the 12K it's just x-strokes.

    I do around 30 with just t tiny bit of pressure, then another 30-40 with NO pressure to finish.

    After that, finish the blade off however you like.

    I use a Crox pasted balsa strop or CBN linen depending on my mood.
    saitou likes this.
    Through the mud and the blood, to the green fields beyond.

  9. #9
    < Banned User >
    Join Date
    Aug 2012
    Location
    Greenwood, Nova Scotia
    Posts
    1,144
    Thanked: 116

    Default

    When did you get linen with CBN????????????

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •