Originally Posted by
HARRYWALLY
It's super secret because I don't know how much of each I put in the jar. If I had to guess.....
1 cup of paste wax
1/3 cup of paint thinner
2/3 Minwax Tung oil (Any hardware store tung oil, they are usually thinned down.)
2/3 100% Tung oil
Add the paste wax and paint thinner into a 1L pickle jar. Shake until completely dissolved and you have something that looks like Camel snot. Then add the regular tung oil and shake until mixed. Then add 100% tung oil and shake until mixed.
I flooded the surface with the lathe on low speed. It absorbed pretty quick, so I did another flood after about 5 min. Again it absorbed quick, so I flooded again. Each time I worked the material in real well with the lathe spinning. I even turned the lathe off, and spun the piece by hand in the opposite direction to work the product into the grain that way as well. It sat for 24 hours to dry, and then I gave it another flooding session. Another 24 hours, I then buffed it on the lathe at low speed which really made the paste wax pop.