6 Attachment(s)
Finishing Harrywally Brush!
So a while back, our resident brush-handle genius copied one of my vintage handles in a 'skateboard' pattern made by stacking and gluing veneers in this thread.
http://straightrazorpalace.com/brush...rd-veneer.html
Lucky Me, He gifted the handle to me! :y
While it looked cool, I decided to get it cleared as deeply as I could using my crude, redneck knowledge and things on-hand at the shop. Got out the supplies.
A can of Duplicolor gloss wheel coating, some 3M Finesse-it polish, and some liquid glass polish/finish.
Attachment 272149
Took a while...Sanded with micromesh down through the grits and 7 coats of the clear wheel coating, 2 days to dry and fine steel-wool between coats.
Attachment 272154
After 7 coats, some hand polishing with 3M Finesse and 3 applications of the Liquid Glass. The pics don't do it justice. It is super slick!
The fit on my 2-band knot is so tight, I am certain I can use it high and low without adhering it to determine my exact preference before I goop it in permanently! :)
It's low....
Attachment 272150
It's high!
Attachment 272151
Anyhoo, it will go home and tried-out before the knot is set. I decided a green O-ring in the groove looked best. Turned-out just like I imagined! :D
THANKS, Andrew!
Attachment 272152Attachment 272153