Filling it with Alumilite or maybe even Fiberglass resin, then re-boring might work. Not a whole lot you can lose at this point. Throwing it out and finding another handle might be just as easy though. :shrug:
Printable View
Filling it with Alumilite or maybe even Fiberglass resin, then re-boring might work. Not a whole lot you can lose at this point. Throwing it out and finding another handle might be just as easy though. :shrug:
My M2 dd brush measures at 21 mm. I do believe that was the same size as yours even though it is wood. (M = metal)
So what you have is a very sloppy edge and a hole that is the same. I also see a crack ? I suspect this brush was not cheap and you really would like to save it. Which by the way, if you decide to trash it, send me a PM please.
Here is what I would do.
ca glue the crack and let it sit for a day.
Convert the drill bit size to mm. and buy a knot that size or smaller. (this would depend on how far down you went with the drill.)
Fix the rim of the brush by sanding it round and smooth. You could flare the top edge instead of making the hole bigger. just get it round and smooth at first. When the knot comes find an "o" ring that will fit snugly around the base of the knot and will also look appropriate when sitting on top of the handle. I would think inset would look the best but this all depends on the "o"ring you use and the hole you create. You can move the "o" ring up and down the knot to get an idea of the feel of the loft you want. Make sure the hole is the right depth and fit it all together to see what you got. If it looks like it will work, set it all in the handle with epoxy.
It is a lot of work but that's what I would try.
I got the hole smooth I was just thinking of dropping a wine cork in and setting in epoxy?. What could I use for an o ring ?.
Attachment 127729Attachment 127730Attachment 127731Attachment 127732
Here is what I got.. The brush fit in the hole is smooth.. I dropped a calk inside think its ok to epoxy how do I determine the loft
The loft is from the rim of the handle to the top of the hair,what size knot is it? the plug dia. do you face lather or bowl lather?
Bowl lather its a 22 silvertip I just need to figure out the loft and I think it will work.. I'm gonna have to live with the slight crack but as long as I can use it
Looking good Bart, :tu I'm gonna try to make a brush before long.
I'm thinking 50 mm loft?
I'm gonna use a wine cork? With epoxy?