She said its called Ortho Ground Clear. You got to be careful with the stuff as it kills everything and some plants that are close by.
Never tried the Veg on plants, but it sure keeps me away! Yuck!
Printable View
She said its called Ortho Ground Clear. You got to be careful with the stuff as it kills everything and some plants that are close by.
Never tried the Veg on plants, but it sure keeps me away! Yuck!
It’s original Bob, as far as I know.
Been in the family for generations now.
I like to use the stuff called Preen. I've had the same problem with my rock covered flower beds. Worked great for a number of years to keep away the weeds until the dirt sifted up (or came down) and started sprouting everything.
Sure is well oiled and cleaned. Firing pin and drop breech all work still. Crude rifling.
I’ve never been able to find .577/.45rounds for it so it hasn’t even been fired this century.
My dad told me it went through one of the boar wars with an ancestor. I think I still have the bayonet for it as well.
:tu
Four years ago I purchased a little portable vertical air compressor from Northstar. I find that it's now about $100 more than I paid for mine.
Anyway, it's a small unit that puts out 5 CFM at 90 Lbs and 6 CFM at 40 at least according to the manufacturer. But it's good enough for what I need here at the Boars Nest.
I've never been happy with the air filters, they looked way too small, deformed. I'd pull them out after a month or so of use but I don't use it all that much.
I got a wild hair up my arse and decided to upgrade the filtration and this is what I ended up with.
Stock Setup:
Attachment 318006
I used black pipe to set it all up and painted the fittings to match the factory color of the unit. Here's a pic showing what I used:
Two 3/4" street elbows
Two 3/4" nipples
Two 1" to 3/4" connectors
Attachment 318007
Attached and ready to run:
Attachment 318008
Here's a comparison of the filters--
Attachment 318009
And for future reference if the filters need replaced:
Attachment 318010
Overkill?? Yea more than likely--
Attachment 318011
You should have chrome plated the new ones!
Are those dust drains on the bottom of the old ones?
I don't see any performance improvements but if your stats are right your children, maybe grandchildren will probably be the first to have to change the filter......:hmmm::rofl2:
Your quest for improved aspiration was fraught with perspiration, consternation, and aggravation no doubt.
But vindication in the end for the stoic Cuda, of the Boar’s.
Your compressor, and it’s owner, can breathe easy tonight..
Nice work, but yeah, chrome’d look baddasser.
:tu
No those aren't dust drains, but the intakes.the top and bottom of the canisters seal against the rubber on each end.
The Red Arrows in this pic show the new intakes/they draw air from the bottom. Each filter is supposed to handle 35 CFM and filter down to 2 micron.
Attachment 318012
Regardless, I'll still be checking on the filters. Something I couldn't get my last Store Manager to understand was 'Preventive Maintenance'. More than once I told him that I could take him out and show him farm equipment that was 50-60 years old or older as farmers found out a long time ago that Grease, Oil and Maintenance was a hell of a lot cheaper than Parts and Labor.
No he never listened. He wouldn't schedule time to grease the equipment, check the water level in the batteries etc. So much for what his college education taught him.:gaah: