Very nice! Suits the blade well I think. :)
Printable View
Very nice! Suits the blade well I think. :)
That looks very nice indeed. Bamboo is strong stuff. I was thinking it may float now too :<0)
The bamboo is very light, I don't notice the weight of the blade with any razor I use.
The most noteworthy thing about the bamboo is how easily it sanded. I did a rough shaping on the belt grinder then hand sanded the rest. It almost seemed the bamboo knew what I wanted and complied.;)
Heh, I got mine from a cutting board. The lamination is 3/4x1/4".
Attachment 158031
Nicely done, I really like that look! I must try that myself.
rs,
Tack
Bamboo is anything but naturally water resistant. Although it is a plant (called "grass" by some), it will suck water and rot like wood. In most cases, sooner than wood. Having built a number of bamboo fly rods, I'm always looking for a way to make it resistant to water. You have to finish it just like any other wood product.
Don
If well oiled and wax protected,bamboo will last a very long time.
Attachment 158151
Fact, Bamboo must be heat cured in order to drive moisture out of it. Structurally, the lignin fibers within bamboo are so displaced between node fibers that it will suck up granules of sand. It is these gaps in the fibers that make it inherently non-water resistant and a pain in the butt to plane. It doesn't matter if you have a section that is 100% power fibers (this is the top 2-3 mm) or 100% pith (inside). The further in you go, the more gaps in the fibers, hence the more water retention. The action of heating bamboo causes these fibers to displace water/moisture and "tighten," making it stronger. It does nothing to keep it from taking the moisture back in. Heat treated cane will, over time, gain moisture back. There is nothing, and I mean nothing, inherently water resistant about bamboo. I've worked with Tonkin cane almost daily for 10 years. If you'd like to test the theory, I'll send you some to play with. Note, I never implied or stated it was waterproof...I'm only telling you it is not naturally resistant to water--regardless of what factual information you have. You can; however, make it nearly water proof by impregnating it with either Nelsonite, Deks Olje, or even tile sealer!
Don
Or you can make it tottally waterproof by resin impregnating,as I do.