6 Attachment(s)
First completed restoration
Compared to most of the work showcased in this forum, this is a modest display--my first completed restoration. I have a few other razors in various stages of work. I started restoring only about a week ago and am still feeling my way around, trying different methods and materials.
Anyway, here it is, an Ern 9/16ths, soaked in CLR/Water (50/50), then hand sanded from 220 W&D through 3000, then polished with Maas.
Before:
Attachment 167808
After:
Attachment 167810
Attachment 167811
On this photo below, you can just make out the etched phrase "ECHT SOLLINGER STAHL" ("REAL SOLLINGEN STEEL"). To take off the corrosion, I had to dig some into the etching. The result is a compromise between getting all the pits and saving some of the etching. It's such a small blade that there wasn't a lot of room to remove steel. I bought this when I first started getting interested in straight razors. I wouldn't now buy such a small blade that needed rust removed.
Attachment 167812
The final picture is the back of the blade. There's an image of an eagle stamped on the tang:
Attachment 167813
The one thing that made me most nervous about this restoration was pinning and unpinning. I didn't want to damage those scales!