Im going to be making some horn scales but i'm having trouble deciding on what material to use for the edge.
Do any of you have any suggestions?
Printable View
Im going to be making some horn scales but i'm having trouble deciding on what material to use for the edge.
Do any of you have any suggestions?
Aluminium is nice to work with
Lead is super easy to work with and easy to find at most fishing gear shops
http://straightrazorpalace.com/works...-way-i-do.html
http://straightrazorpalace.com/works...pic-heavy.html
Here is a couple of good threads on the subject. There are some simple jigs you can make to help in the process as well, no matter what your material of choice is. I do prefer the look of metal wedges. Lead, aluminum and brass seem to be the best from my perspective.
Is the horn black, brown, or honey coloured?
For black, something contrasting is nice such as aluminium as has been suggested, or if you want to be traditional, lead.
My favourite that I've made myself for honey horn was faux ivory sandwiched between a couple thin pieces of brass.
We are pretty spoiled for choice these days with everything from traditional materials to modern composites and plastic in all shades and colours.
EDIT: Shaun - you just beat me to it!
I restore a lot of old Sheffields and consequently work with lead wedges a lot. I have a supply of .54 caliber lead balls from a rifle I no longer own and they are plenty large enough to make a wedge for any size razor. I start by pounding them flat on a steel bench block (any anvil will do) and then form the taper with the hammer as well. I then trim most of the excess and flatten the sides with sandpaper on a flat surface. After test fitting and tweaking as necessary, I drill the hole, cut and flat the front face, and assemble the razor - the excess to be trimmed from the back and sides is rough cut with flush-cutting nippers and then filed flush with Swiss jewelers files.
You could always use a piece of scrap from the same horn blanks and make it match. I did it on my Big Horn Rams razor and it turned out nice.
Here's how it turned out.
Attachment 223568
Thanks for the ideas. It is water buffalo horn.
I was think of a white material but I can't think of anything haha.
I'm liking the metals though.
If you want a white material use bone. It's easy to work with and readily available. Plus it looks awesome with horn. This wedge was done with a black bear femur.
Attachment 223589
Take your time and find something unique. I'm big on that theory. I just get tired of the same old same old look that everyone else has. I'm just a rebel that way... LoL
I second the use of bone; here is a camel bone wedge with variegated horn scales:
Attachment 223592
Here you go:
Attachment 223596
That would have looked just as good in the opposite direction too. Putting the white wedge on the more translucent pivot end so you could see it. Either way, I like that a lot.
Thank you! I quite agree re: switching the orientation - they both would work very well. Having a particularly nice piece of horn to work with helps a lot!
Here are more options with different scale material. The first if black horn in bone scales, the next is lead faux turtle scales, faux ivory lined in brass, lead with brown horn scales, and brass in with black acrylic scales. Many options.
Attachment 223772Attachment 223773Attachment 223774Attachment 223775Attachment 223776
I think i'm going to try, black water buffalo horn scale with white horn wedge lined with brass.
I chose to use horn just because I like it. One day I want to try gold
Here is a similar version. Black horn , Ivory wedge but sterling silver inlaid into the scales rather than just sandwiched.