Page 1 of 2 12 LastLast
Results 1 to 10 of 12
Like Tree46Likes

Thread: A very early F. Fenney and some restoration questions

  1. #1
    Senior Member Storyvillenight's Avatar
    Join Date
    Aug 2017
    Location
    London
    Posts
    107
    Thanked: 28

    Default A very early F. Fenney and some restoration questions

    Just acquired a batch of four early Sheffield razors all in need of significant restoration. The star of the pack is this F. Fenney which is not a Tally Ho. The Tang is marked simply: "F. Fenney, Improved Razor". I believe it to be c.1820. The blade (love the shape) is actually in great condition. The fancy scales are bone with one rather obvious flaw (a large chunk missing from one scale). The damage does not impact the structural integrity.

    My intention is to restore it keeping the original scales if possible. I will not dismantle for fear of damaging the fragile scales. So to my questions for the experts out there:

    1/ The scales are incredibly thin...I would say paper thin. Is it possible to patch damage like this with a bone shaving?
    2/ I suspect the bone is cow, but are there any experts out there who can confirm from looking at the pictures?
    3/ Has anyone ever carried out a scale repair like this and can you offer any advice?

    Many thanks (pictures below)
    Name:  F_FENNEY_LOWRES_-1.jpg
Views: 299
Size:  24.8 KBName:  F_FENNEY_LOWRES_-2.jpg
Views: 280
Size:  30.6 KBAttachment 274871Name:  F_FENNEY_LOWRES_-3.jpg
Views: 291
Size:  28.8 KB
    Last edited by Storyvillenight; 10-05-2017 at 08:24 PM.
    Geezer, rolodave, BobH and 7 others like this.

  2. #2
    Senior Member BeJay's Avatar
    Join Date
    Jan 2013
    Location
    Communist State of California
    Posts
    1,461
    Thanked: 463

    Default

    I would say that it is possible to repair it but you will have to disassemble the scales. If it were mine I would take it apart and try to find some matching bone that I could cut to shape. Bone can also be bleached or stained to get a closer match in color. I would then try to color match some baking soda and do a baking soda/CA glue repair to join the two pieces smoothly. I would then figure out some kind of a liner to use to keep the joint strong. Outback recently posted some repairs that he did on ivory using a fiberglass sheet and some resin to reinforce the back of it.

    It's a very special razor you have there. In my opinion it is well worth the time and effort that it would take to repair those scales.

  3. #3
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,383
    Thanked: 4820

    Default

    I would absolutely try to repair those. The repair with the very fine fibreglass weave and epoxy that outback did worked out fantastic. I am not quite as creative and have repaired a few sets of scales by lining them with G-10. It comes as thin as 0.014" which is very close to a 1/64", and it does come thicker too. Bone bleaches well with peroxide. I would be inclined to take a piece of bone, fit it close, bleach it white and then stain it as closely as possible to match it up. I really like orange pekoe tea and espresso for staining. You can then adjust the darkness by sanding a little off with high grit wet dry paper.
    That really is a beauty, both blade and scales.
    Geezer, bongo, BeJay and 3 others like this.
    It's not what you know, it's who you take fishing!

  4. The Following User Says Thank You to RezDog For This Useful Post:

    Geezer (10-06-2017)

  5. #4
    Str8Faced Gent. MikeB52's Avatar
    Join Date
    Aug 2013
    Location
    Orangeville, Ontario
    Posts
    8,372
    Thanked: 4200
    Blog Entries
    1

    Default

    As above. ^^^^
    Totally worth saving. Fiberglass cloth and resin repair to reinforce the bone splice in place from underneath will work well.
    Beautiful project piece..
    Congrats.
    "Depression is just anger,, without the enthusiasm."
    Steven Wright
    https://mobro.co/michaelbolton65?mc=5

  6. #5
    Captain ARAD. Voidmonster's Avatar
    Join Date
    May 2011
    Location
    Pacifica, CA
    Posts
    2,474
    Thanked: 2226

    Default

    Definitely repairable. Superglue bonds great to bone. In my experience, there's never been any need for fiberglass and epoxy backing, and I've used superglue for structural pieces of ivory at the pivot.

    Matching the colors will be an interesting challenge. If it were me, I'd try to get enough material to run multiple experiments on until I get it close.

    Your best bet is to dye the add-in piece as close to the color of the original scales as possible, but a tiny bit lighter. Once glued on, use a sponge or paper towel to sort of feather in the dye.

    But the pique work is absolutely worth preserving.
    -Zak Jarvis. Writer. Artist. Bon vivant.

  7. The Following User Says Thank You to Voidmonster For This Useful Post:

    rolodave (11-05-2017)

  8. #6
    Senior Member Storyvillenight's Avatar
    Join Date
    Aug 2017
    Location
    London
    Posts
    107
    Thanked: 28

    Default

    Shaping and tea-staining a bone sliver and using superglue was exactly what I had in mind so it's great to hear that could work. Because it's not structural, the repair should not come under too much strain. I've had a beef shin ageing outside for a few weeks and intend to cut from that. If it doesn't hold I'll go the scales off and reinforce route...it would certainly make it easier to clean...but this seems to be a great survivor so I kind of want to preserve even the original pins and washers!

    Quote Originally Posted by Voidmonster View Post
    Definitely repairable. Superglue bonds great to bone. In my experience, there's never been any need for fiberglass and epoxy backing, and I've used superglue for structural pieces of ivory at the pivot.

    Matching the colors will be an interesting challenge. If it were me, I'd try to get enough material to run multiple experiments on until I get it close.

    Your best bet is to dye the add-in piece as close to the color of the original scales as possible, but a tiny bit lighter. Once glued on, use a sponge or paper towel to sort of feather in the dye.

    But the pique work is absolutely worth preserving.

  9. #7
    Senior Member Wolfpack34's Avatar
    Join Date
    Apr 2011
    Location
    California
    Posts
    1,596
    Thanked: 865

    Default

    Quote Originally Posted by Voidmonster View Post
    Definitely repairable. Superglue bonds great to bone. In my experience, there's never been any need for fiberglass and epoxy backing, and I've used superglue for structural pieces of ivory at the pivot.

    Matching the colors will be an interesting challenge. If it were me, I'd try to get enough material to run multiple experiments on until I get it close.

    Your best bet is to dye the add-in piece as close to the color of the original scales as possible, but a tiny bit lighter. Once glued on, use a sponge or paper towel to sort of feather in the dye.

    But the pique work is absolutely worth preserving.
    +1...I agree with Zak. Definitely worth restoring.



    ***Nice to see you posting again Zak!
    Lupus Cohors - Appellant Mors !

  10. The Following User Says Thank You to Wolfpack34 For This Useful Post:

    Voidmonster (10-07-2017)

  11. #8
    Senior Member Maladroit's Avatar
    Join Date
    Jul 2011
    Location
    Brisbane, Australia
    Posts
    648
    Thanked: 168

    Default

    Or you could do what is termed a museum repair - i.e. where you make no effort to disguise the insertion. This is most often done where a piece has significant historical value but a repair is required to provide the structural integrity to allow it to be used.

  12. #9
    Senior Member blabbermouth outback's Avatar
    Join Date
    Mar 2015
    Location
    Akron, Ohio
    Posts
    11,924
    Thanked: 4300

    Default

    Yes I've repaired ivory, and bone scales with CA.
    I've used CA n Soda for many repairs on bone, and used no backer. The hardest part is getting it the match color of the original scales, I'm still working on that part.
    But all the repairs to bone are very strong, and have held up to the pinning process.
    This one was missing a large piece from the wedge end, and a small piece from the pivot.
    Name:  KIMG1959-1.jpg
Views: 192
Size:  26.9 KB
    Name:  KIMG1962.jpg
Views: 196
Size:  13.3 KB

    And talk about thin..!!
    Name:  KIMG1963-1.jpg
Views: 199
Size:  32.5 KB
    Mike

  13. #10
    Senior Member blabbermouth ejmolitor37's Avatar
    Join Date
    Oct 2015
    Location
    Knoxville,IA
    Posts
    2,368
    Thanked: 762

    Default

    Very Nice razor. Looking forward to seeing the final product.
    Nothing is fool proof, to a sufficiently talented fool...

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •