I had this blade for a while (almost 2 years), I was hoping for ivory to be available again. Steve sent me a piece of kirinite in tortoise, thank you [USER=73183]@Steve56[/USER]
Jamie was also an inspiration
I wanted to make them as thin as possible to mimic the real thing, I took a piece of the cut off when rough shaping the scales and ground it down at a slant and tested to see how thin it could tolerate being and still be rigid, it turns out it was about 1/8, thinner and it would fold.
I used a piece of old ivory for the wedge and pinned her without collars to keep with the tortoise tradition.
https://i.imgur.com/HhtSGJa.jpg
https://i.imgur.com/qj6WqoY.jpg
https://i.imgur.com/OBeGC1Q.jpg
https://i.imgur.com/20SV1AS.jpg
https://i.imgur.com/LGdnyaR.jpg
Turned out OK, not my favorite material to work with, it will melt and burn if worked for too long on the sander.
Enjoy