9 Attachment(s)
Full Custom rebuild of a Microtome
David/nubskills and I were talking about this one night in chat which led me to doing one of these awhile back here in this thread...
After that one, he sent me this Microtome, and a set of designs that he had drawn up... :) of course to almost perfect scale, pretty impressive drawing actually...
This started out the same way as a pretty boring old unknown Microtome..
Attachment 53639
Attachment 53640
But with a few cuts, and some serious Dremel grinding and modding, the basic Kamisori shape began to come out..
Attachment 53641
Attachment 53642
I re-fashioned the entire tang, by cutting off the tail and grinding in a sword/knife style tang, and went with a one piece design for the handle, for which I used Black Lightning acrylic...
I drilled out the tang hole, and drilled through a hole to use a locking pin as per David's design even though it wasn't really needed.. I used Acraglass bedding to seal in the tang then the Nickel Silver cross pin... I tell you this was possibly the most hours I have put in on any restore/rebuild, and yes David I saw the dull spots that showed up in these Macro pics and re-polished it already :D
So here are the finished pics of a new Micro-sori :)
Attachment 53643
Attachment 53644
Attachment 53645
Attachment 53646
Attachment 53647