Pearl Nightmare henckels

Anyone who knows me well knows I just love Henckels. I have a 1 incher which has turned out to be too thinly ground for my wiry beard, so I found this #64 with some even hone wear and warped scales in my favorite 7/8 width and stiffer grind. I like fancy stuff, so I proceeded to pin it into some vintage pearl scales.
I like using Babur's collars on pearl as I can oversize the pearl a bit and size the collars so they put the peening load on the liners and spare the pearl. This time, I decided to go with bigs and littles domes over the inner collars. Got away with it on the bottom, chucking the black wedge and substituting a pewter one from a parts razor, but as I peened the top......you guessed it.....CRACK! One panel at the top damaged! I found that the outer domes needed a bit of sanding to keep them from hitting the scales until the peen was tight. Undaunted, I found some pearl, slightly thicker to allow for sanding, and bought 2 pieces. I have now learned to buy more so I can match the pearl better. One piece had some color in it, so I went with it. I CA'd it to the liner and chopped off excess with a dremel cutoff wheel and sanded until smooth and flush. I went to Hobby Lobby and got a lifetime supply of tiny silver wire and drilled out the hole and carefully peened it in. Made the pin hole, oversized the pearl a bit to accomodate the inner collar, and resized another collar and this time, sanded down the back of the domes to where they were not touching the pearl and were nice and flat on the back and not sharp. As I peened, the inner collars crushed a bit and the outer domes rested on the pearl as it got good and tight. Worked out pretty well! I thought I had a decent match, but it seemed the more I polished, the whiter the pearl on my replaced panel got! Maybe time and handling will sort it out. Overall, I feel as I saved it!
Sorry for all the words. I feel triumphant! To the Hones!
Tom






Attachment 117774Attachment 117775Attachment 117776Attachment 117777Attachment 117778Attachment 117779Attachment 117780Attachment 117781

Thomas you got yourself a keeper there. What a stunning razor. You did an excellent job
Well done
Darl

Nice job, I always wondered how those pearl scales worked! I have some of those same little hobby clamps, really handy :)

Turned out just great. Looks good and no doubt is a great shaver.

Oh man that's gorgeous! I love the contrast between the vertical and horizontal bars on the scales.

Quote:

---

Originally Posted by maddafinga

Oh man that's gorgeous! I love the contrast between the vertical and horizontal bars on the scales.

---

I think the vertical bars are abalone.

Great work! Areal pleasure on the eyes,

Tom, a Heavy Henckels? Ohh. You're a happy guy. I've seen pictures of 2, including yours here, and only seen 2 in the flesh. Bought both. One was a wonderful shaver, the other you'd have to pry from my cold, dead hands. Your work here, looks lovely, and I'll bet its gonna be a long term marriage of many happy years. Enjoy the shaves and savor your fine accomplishment.

Want so bad!

That is excellent work! While it may 'show' what the Hell! You saved some very beautiful vintage scales!!! I find that impressive!!!

I thank you for your efforts!!!!:bow

I'd absolutely say you saved it. That looks really great. Thanks very much for posting!

Amazing scales! blade not bad either, i must say the pins are out of this world, Enjoy!

Nice save and great work.That one beautiful razor.How does she shave?

Lovely!
Thank you for saving the scales and a great razor. Your show and tell will help others rectify a problem!
~Richard

Quote:

---

Originally Posted by Blackstangal

Nice save and great work.That one beautiful razor.How does she shave?

---

Thanks! I gave it the whole arsenal last nite and shaved this morning. Happy to report it laid waste to a 4 day wire beard with no problem. Nice and close!:D Interestingly, the color seems to be coming back into the replaced panel since honing and shaving??? Perhaps the handling and oil from my hand? Or maybe lighting difference between the workshop and the shave den? :shrug:

Quote:

---

Originally Posted by Geezer

Lovely!
Thank you for saving the scales and a great razor. Your show and tell will help others rectify a problem!
~Richard

---

Thanks, Richard! A complement from you is a complement indeed!

You did a fine job on those scales and razor, looking rather splendid.

Jamie

Looks really great man good job love the color in the pearl.

Excellent work. Stunning razor. And a very educational post to boot.

Thanks for sharing both the pics and the method behind the madness!

A nightmare with a happy ending. Love it ! Making a note***check everything 3 times, then peen. *** Thanks for the lesson.

Great job!
Very stylish and beautiful razor.
You need to try different combinations of pattern on the handle. It may happen unexpectedly beautiful result.
Quality of work very much.
Good luck.

that is amazing..I love the three sections on it...Great job indeed!!

Ouch!!! I didn't think pros like you made mistakes. Beautiful work and fantastic save as usual. I love the pewter wedge, it just seems to be the exact right match for the scales. Happy shaving Tom.

Randy

Excellent work Tom - well done!

Regards,
Neil

Absolutely beautyful scales

Great job mate! bravo!!!

Doesn't look like a nightmare now.

It is simply AWESOME!!