Looking for pins and washers down under

**Grazor** · 03-29-2013, 11:00 PM

Well it has come to the stage that i need pins and washers to get a few razors sorted, anyone know a good supplier in Oz or NZ? Or even the US, i need brass and nickel.

**bill3152** · 03-29-2013, 11:30 PM

I'm in US bought some nickel silver rod and washers on eBay. I don't know if they ship international. It was more than 3 months ago so I can't get the sellers name or store.

**Hirlau** · 03-30-2013, 01:45 AM

Grazor, a lot of the guys order from here, I have, they are fast.

Micro Fasteners

use this as a guide, taken from a post by Glen;

Shopping List for Micro Fasteners
Bolts: Hex Head Machine Screws - Brass - Micro Fasteners

These HBB00121000-80 x 3/4$ 8.70

Nuts: Hex Nuts - Brass - Micro Fasteners

These as they are easier to use for mock up

HNB00801000-805/32 .046$ 4.10

If you have any intention of using them for real then get these little ones

HNBS0080500-80 scale3/32 .048$ 9.90

Washers: Flat Washers - Brass - Micro Fasteners

Get all these in brass for in and out

FWB0100#0.064 1/8 .017$ 3.80

FWBW0100#0 wide.064 3/16 .017$ 4.40

In SS Flat Washers - Stainless - Micro Fasteners

Get these

FWSS0100#0 Narrow Washer S/S I.D. .062xO.D..125x Thk .017$ 2.20

FWS00100#0$ 2.20

If you are going to actually use these for pivots then you need the wrenchs (2) and you need to call for those they are 3/32 hex these might be listed online now I haven't checked in years...

**Grazor** · 03-30-2013, 02:20 AM

Hey thanks Hirlau. can't find anything local, i will check it out. Do they do the rod too?

**Hirlau** · 03-30-2013, 02:34 AM

I don't know, I just got the washers from them, check the site, I will look up my rod source in a few.

**gooser** · 03-30-2013, 04:42 AM

if not i just ordered some rod from here cause i was placing an order for material from them ... also a welding shop in your area should have the rod ..

Brass, Nickel Silver, Stainless Rods

**Hirlau** · 03-30-2013, 04:45 AM

Grazor,
Gooser has it on the rods, I order from Jantz too, nickel silver; I get the brass locally from a hobby shop.
I just checked a receipt from them , from 2 years ago.

**gooser** · 03-30-2013, 04:50 AM

shoot !!! i overlooked the nickel on there when i ordered or i would have added it ..

i thought maybe they were out of stock ...lol

**Hirlau** · 03-30-2013, 04:53 AM

Rarely do I restore/re-pin, so I got 5 rods, which will last me a lifetime.

**Grazor** · 03-30-2013, 04:57 AM

Thanks guys, i will check it out.

Thread: Looking for pins and washers down under

LinkBack

Thread Tools

Display

Looking for pins and washers down under

The Following User Says Thank You to bill3152 For This Useful Post:

The Following User Says Thank You to Hirlau For This Useful Post:

The Following User Says Thank You to gooser For This Useful Post:

The Following User Says Thank You to Hirlau For This Useful Post:

Posting Permissions