Sterilizing the stem of a pipe

I recently bought a pipe stand with a humidor jar so I had a place for the few pipes I had and my pipe tobacco would not dry out and I got a pipe in the deal. Sorry for the phone pics. My questions are how do I sterilize the stem and do I need to sterilize the stem? I have never gotten a used pipe before. I usually smoke a gouda clay pipe or the nameless briar I bought. This one looks nice and I don't want it feeling neglected. It has Treaty Bond Pre-Smoked on one side of the shaft and Imported Briar Adjustomatic on the other.
Attachment 107562Attachment 107563

I take alcohol and soak a pipe cleaner in it and run it through, one after another until they come out clean. You've got a stem with aluminum plumbing so stay away from bleach. If you have some of the Long's Bristle cleaners they are very aggressive and will do the job faster than the regular cleaners.

Quote:

---

Originally Posted by JimmyHAD

I take alcohol and soak a pipe cleaner in it and run it through, one after another until they come out clean. You've got a stem with aluminum plumbing so stay away from bleach.

---

Thanks JimmyHAD. The only thing I could find was the bleach treatment and I knew that would be bad on the metal. There isn't really any oxidation. I was thinking about just alcohol and a scrubbing and you seem to agree.

Quote:

---

Originally Posted by Pyrateknight

Thanks JimmyHAD. The only thing I could find was the bleach treatment and I knew that would be bad on the metal. There isn't really any oxidation. I was thinking about just alcohol and a scrubbing and you seem to agree.

---

Yeah I've done a lot of them like that. I've used the bleach treatment on badly oxidized stems too. That will leave a 'pebble grain' finish to the vulcanite. I've been told that it can be brought back shiny with 1k grit sandpaper but I just hit them with a bit of olive oil and a paper towel after the bleach. If you ever use the bleach you need to rinse them out well. It doesn't add to the flavor of the tobacco. :)

+1 On bristle pipe cleaners soaked in alcohol. I normally use the 90% isoproplyl as it evaporates a bit more thoroughly but 75% would work just fine. Run the pipe cleaners through until all internal goo is removed and your pipe cleaner comes out clean. After that run a dry one through a couple times to remove any excess and you'll be in good shape.

For the exterior of the bit mild abrasive is the key. Over the years I've had good luck with anything from figernail buffers to xtra fine steel wool to baking soda on a tooth brush. Once all the oxidation has been scrubbed off, I normally apply some rubbing compound and buff with a dry, soft cloth.

+1 on bristle cleaners and alcohol for germ killing.

For oxidized bakelite stems I first soak the stem (NOT the briar) in something akin to ArmorAll (I do not use this product). After a few days I then start buffing with rubbing compound or very fine sandpaper. If necessary, I will resoak the bit and then resand/buff. IIRC, the oxidation is a result of oxyen, UV rays and the sulfur in the bakelite.

Once the stem is all black I buff until it is nice and shiny. Then I apply several coats of carnuaba wax. Also, keep the newly restored pipe out of sunlight. PM me if you want the manufacturer's name of the products I use.

Dave

There are two things here: sterilizing and polishing.

As mentioned, bleach is not recommended because of the aluminum tenon, though I did a couple of aluminum tenon pipes with a 50/50 bleach/water solution and others with Oxyclean and they are none the worse for wear. My polishing went through a progression from 600 right up to 12k micromesh. Then I used some stem polish to protect them. Probably overkill, but it was fun.

Here are my restored stems from a few different pipes, all with aluminum tenons:
Before:
http://i1090.photobucket.com/albums/...n/Brigham2.jpg

After:
http://i1090.photobucket.com/albums/...n/IMG_9841.jpg

Full thread: http://straightrazorpalace.com/finer...sportsman.html

A couple more:
Before
http://i1090.photobucket.com/albums/...s/IMAG0374.jpg

http://i1090.photobucket.com/albums/...s/IMG_9764.jpg

I also have a question. I read somewhere metholated spirits was a good replacement for grain alchohol. Can anyone confirm or deny?

Geek

I wouldn't use mentholated anything, as it might leave that flavour in the pipe. I use 99% isopropyl alcohol in my pipes and so far, everything is fine and I don't have any further brain damage.

A friend who is a good hand at restoring stems to black uses tape on the shank of the pipe where it meets the vulcanite. He buffs the stem on the pipe. This way the stem doesn't end up a smaller diameter than the wood. If the stem is buffed separately it is easy to go to far at that point.

Quote:

---

Originally Posted by JimmyHAD

A friend who is a good hand at restoring stems to black uses tape on the shank of the pipe where it meets the vulcanite. He buffs the stem on the pipe. This way the stem doesn't end up a smaller diameter than the wood. If the stem is buffed separately it is easy to go to far at that point.

---

Yeah, that's a good point. I know at Walker Briar works, they actually make a little plug for your stem to go into for buffing so that you don't lose the crisp edge fit with your stummel.

No-Scuff Repairs

As it stands right now I think I am planning on using Everclear and pipe cleaners on the stem. I think I will scrape and sweeten the bowl.

Quote:

---

Originally Posted by Pyrateknight

As it stands right now I think I am planning on using Everclear and pipe cleaners on the stem. I think I will scrape and sweeten the bowl.

---

You can also do the salt treatment if the residual aroma is really overpowering. I've done it on a couple of estate pipes that had more of their old aroma than I was comfortable with. It comes with the caveat that some have had bowls crack shortly after smoking following the salt treatment but I've never had an issue.

http://www.pipes.org/Articles/PipeSweet.html

Quote:

---

Originally Posted by JimmyHAD

You can also do the salt treatment if the residual aroma is really overpowering. I've done it on a couple of estate pipes that had more of their old aroma than I was comfortable with. It comes with the caveat that some have had bowls crack shortly after smoking following the salt treatment but I've never had an issue.

The Professor's Pipe-Sweetening Treatment

---

+1 on this.

I got a Peterson that had a pretty hefty latakia ghost, even though it was reamed clean and had been cleaned fairly well by the seller. I did a bit more cleaning of the shank and the system well, but what really helped were two salt/alcohol treatments of 24 then 48 hours, each. The ghost was completely gone and now I'm ghosting it back up. With more latakia :)

Also guys, check out the stem resto kit from Walker (at the link I gave above). It's a great little kit for keeping your stems shiny and clean. I use it every couple of months and my stems are all nice and shiny. It's really best for vulcanite stems, I think.

Salt and Alcohol is the bee's knee's. I've brought back a couple dozen crusty old Kaywoodies using this method. Works like a champ!

Well the stem is clean and the bowl is being sweetened as we speak. The alcohol definitely brought out some oxidation on the stem though. Not really bad. Probably able to take it out with a light sanding if I feel like it.