What do you mean Chinese 12k stone?

I've been looking at buying a set of hones and have more or less decided on 2 Norton combination stones; the 220/1000 and 4000/8000. But That chews up most of my budget and I'd like a finishing stone rather than a pasted strop.

Lots of people on SRP talk about a Chinese 12k stone. I'm from New Zealand and they certainly aren't available here that I can find. So where do you get them from? Is this the same sort of thing;

12000 grit natural whetstone for fine honing. +/- 2 lbs - eBay (item 220719842945 end time Feb-03-11 16:37:32 PST)

That one looks EXTREMELY rough and also much lighter (could just be the photo) than normal, but it is the hones from Guangxi that we are talking about. I think the ebay seller open_razor or something like that sells them also, and his look much more finished (flat looking faces).

Don't forget to get something to lap your hones with.

EDIT: Yup, it's Open_razor. See here: http://stores.ebay.com/classic-razor...=p4634.c0.m322

The Chinese hones also are available HERE.

royalshave also carries them.

I've wanted to try out these hones but I'm scared of lapping them.

Carba-tec used to sell them a few years back but can't see them on the website now. They have a branch in Auckland. Worth a phone call. The 8x2" used to be only $15. Oh, & they call them Chinese polishing stones not C12k's

http://straightrazorpalace.com/down-...-hones-oz.html

Quote:

---

Originally Posted by onimaru55

Oh, & they call them Chinese polishing stones not C12k's

---

Since it's not a 12k stone, good for them!!!

Quote:

---

Originally Posted by Utopian

Since it's not a 12k stone, good for them!!!

---

LOL..i remember a thread where they were called all sorts of names.

Quote:

---

Originally Posted by onimaru55

LOL..i remember a thread where they were called all sorts of names.

---

I think you might mean this one. It was fun!

Quote:

---

Originally Posted by Utopian

The Chinese hones also are available HERE.

---

That's where I got mine from.

Quote:

---

Originally Posted by onimaru55

Carba-tec used to sell them a few years back but can't see them on the website now. They have a branch in Auckland. Worth a phone call. The 8x2" used to be only $15. Oh, & they call them Chinese polishing stones not C12k's

http://straightrazorpalace.com/down-...-hones-oz.html

---

Thanks heaps for the tip on carba-tec. It turns out that the only store in NZ is 5 minutes out of my way coming home from work (by foot!) I stopped by today and bought a 8"x3"x1" C12k for NZ$35. They also had the smaller one you bought for NZ$25. That has saved me enough dosh that I should be able to buy a lapping stone as well!

I have this greenish stone ,it is cheap.
I have used it but I do not think it is good comparing with Japanese whestone 3k/1k. In my opinion , it is just similar to #800.
However , some Hong Kong people think that initally grinding , the muddy fuild produced will help for further honing ,but I do not think so .

You are probably thinking about the
http://straightrazorpalace.com/membe...shing-hone.jpg
Chinese Guangxi polishing hone (#3 from left in the picture).
I got mine from Woodcraft.

Otto, let me guess what the others are (from left to right):
1) BBW/Coticule combo
2) Norton 4k (appears that it might be a combo 4/8)
3) duh, Chinese 12k
4) vintage Thurry or Escher, not really able to tell.

I'm just winging it, of course, but am I anywhere near right?

Quote:

---

Originally Posted by SonOf1337

Otto, let me guess what the others are (from left to right):
1) BBW/Coticule combo
2) Norton 4k (appears that it might be a combo 4/8)
3) duh, Chinese 12k
4) vintage Thurry or Escher, not really able to tell.

I'm just winging it, of course, but am I anywhere near right?

---

1) Norton 220 / 1000
2) Norton 4000 / 8000
3) Chinese Guangxi polishing hone aka. Ch.12k
4) Osaki Japanese natural finishing hone

wow. hard to be more wrong than that... :|

Still, a nice collection...