So I just got in a few straight razors I bought off of ebay and it came with a old hone! don't know what brand but while looking it over it felt kind of brittle so I applied some pressure and it broke in half. is this normal for a hone?
Printable View
So I just got in a few straight razors I bought off of ebay and it came with a old hone! don't know what brand but while looking it over it felt kind of brittle so I applied some pressure and it broke in half. is this normal for a hone?
Without seeing a photo or two it is pure speculation, but I'd say it had a fault or stress raiser and yielded to the pressure. IOW, any normal hone I've encountered would not snap easily. OTOH, I wasn't trying to break any. :p Fellow over at Japan Woodworker told me he has glued synthetic stones back together and lapped and used them. :gl:
I've seen it before on a couple of carborundum hones I once had. They were brittle to the touch and it didn't take much to break them. My guess was the binder broke down over the years..:shrug:
I think it was just old because it started failing apart on the corners once I started applying pressure .
Is it natural or synthetic?
Unless it's very thin rock usually is brittle like that if it has serious flaws in it, is very thin or the rock itself is rotted.
Photos so we can see what typye of stone it is.
Question for the Senior Members of SRP:
What are the funereal rites for a deceased hone?
Do we pour hi-test whiskey over it and immolate it a la the Vikings?
Is there a hone "transplant list" in the spirit of organ donation?
Is the playing of "Taps" along with an honour guard required?
Sorry to hear about your hone. I'm sure it's in a happy place and feeling no pain. :cry:
Look at the bright side.
Now you've got two hones. LOL
I would take pics but its in the dump now! sorry!
bokerblade:
GO RESCUE IT STAT!! :eek:
I have a Franz Swaty that I got from an old barber friend of mine that was broken. He was cutting hair one day and a guy came in with a little boy. He let the boy run wild and the kid eventually got to opening drawers where the barber kept his supplies. The barber tried to be nice and say don't do that, hoping the father would get the hint but it didn't work. Finally the kid found a Franz Swaty hone and dropped it breaking it in two pieces. The barber lost his temper and told them to leave. Anyway he gave the hone to me and I put the ends on a belt grinder making them flat at an angle, so that they matched well and glued them with epoxy. I laid them on a piece of glass with a rubber band around the sides of it. After lapping it, I can barely tell that it was broken. Sort of like a hairline crack. I glued it to a piece of masonite and It works well. I have used it many times.
Get some CA, and glue it carefully back together, lap it flat, and use it. Worked pretty well for me with synths and naturals too.
Yeah, At the very least, you have a bunch of slurry stones and maybe a Barber hone or two....When it's a hone, nothing goes to waste.
I let a waterhone spend the night out in the shed once, in its bath, and it froze and threw a pretty good chip. After kicking myself, I let the pieces dry out and glued the chip back on. Don't remember what I used, probably epoxy. Lapped the joint smooth and have used it without incident ever since.
Think of it as mitosis...maybe you can feed them both some coti slurry and they'll eventually grow into big boy hones again? ;)