Printable View
So I was thinking, if its ok to use lather on barber hones and/or finishers, what about using dish soap/water mix in a spray bottle.
The reason I ask, is that I work in a tire repair shop and at the moment, as everyone already has their winter tires.... we have a bit of down time..... in the shop to check for punctures, we use a spray bottle with dish soap/water mix.... would this be ok to use to spray for honing?
thoughts?
ideas?
comments?
I won't use it, since I like to see what I am doing. The bubble cause more problems for me than they solve. It's hard to beat plain old water for me, but some people do use windex or similar window cleaner. YMMV
Depends on the stone . You will dissolve or at least degrade the surface of some modern stones with it while for most naturals & old fashioned waterstones, it's ok.
thanks guys, thats why i was asking. now, i wouldnt mind the bubbles, if at all as we dont use too much soap, but as to the modern stones.... why would it degrade the surface?
i planned to so a lunch session. and the only non nats ive got is a 1/3K. ill also have a smallish coti, 2x thuris and a boss barber hone
Because it says so in the instructions. :)Quote:
Originally Posted by Munichjoe
Even too long a soak can soften the surface of a Shapton Pro.
Sodium carbonate sold by Namikawa also comes with a warning.
Sodium Carbonate | Polishing Tools | Namikawa Heibei Co.,Ltd.
Sodium carbonate is washing soda, which is a fairly aggressive alkali (it's the main ingredient in dishwasher powders); I wonder if he didn't mean sodium bicarbonate. That's what I use as a rust preventative in a spray bottle for honing - in a pretty dilute concentration I should add. My mate Havachat45 (Geoff) suggested it and I can testify to its effectiveness.
Dishwasher soap its not.... just plain liquid dish soap
Sword polishers in Japan reportedly use a bit of bicarbonate of soda in the water to prevent any tarnishing while they're finishing out. I've done the same polishing knives and it works.
Alex sent me a sample of Shaklee Basic H which is a non-foaming detergent/surfactant to try on JNats and I like it. It has a bit of thickness to the film and washes away cleanly. I don't know if the pH is safe for synthetics like the Shapton Pro though.
Cheers, Steve
Quote:
Originally Posted by Maladroit
Dunno. Can't read Kanji :)
I used bicarb in water on my Kings & Jnats for years. When I started buying modern stones I stopped. It was 2 easy to use the wrong water bottle. Also one of my Suita started to soften & had to lap a fair bit away to find good stone again. Can't say for sure it was the bicarb but no probs since I stopped about 4 years ago.
Soapy water is just fine.
Again, except for the hones that specifically prohibit its use.Quote:
Originally Posted by drmatt357