wapienica bent

I have watched the wapienica and I have observed that this very bent. You it has happened this?
It is possible to be solved somehow? I must make a balance movement?

Greetings

What is bent amigo? Is the blade bent or are the scales bent?

I have 5 wapi's and the blades look good. Some of the scales are bent. I intend to replace the scales with wood scales. I don't like the steel scales anyway. Poor balance and too heavy. The razor will be a vary good shaver with lighter scales.

Take care...

Sorry for me bad inglish.
The blade is not flat. Therefore it does not touch everything in the stone when sharpening.

Thanks for your help.

Use the X pattern to hone with the heel leading.

Quote:

---

Originally Posted by randydance062449

Use the X pattern to hone with the heel leading.

---

I search for heel leanding in forum.
RandyDance this explanation of x in this post is heel leading?

Greetings from Barcelona

Thanks for your help



-------------------------------------------------------
Originally Posted by xman http://straightrazorpalace.com/image...s/viewpost.gif
Just use the Rolling Hone method:
As you begin each honing stroke, have the heel in good contact with the hone and move that point or area of contact with the hone gradually up the edge to the tip throughout the honing stroke. Remember to keep the pressure equal and even up the edge and you should do well.

X

-------------------------------------------------------

Wouldn't the heel leading (roll) be dependent on the type of concavity/convexity? If the edge has a smile, it would work. If the blade is bent, one side being concave and one side being convex, there should be no easy way to sharpen the razor until all the distortion is honed or ground out. Correct, or am I missing something here?? (often the case)

Bruce