I was reading How to and Why over at classicshaving.com/ and came across this concerning the TPT.
I'm still new to all this, but I've never heard that the edge wouldn't slide at all.Quote:
Originally Posted by How To And Why
Printable View
I was reading How to and Why over at classicshaving.com/ and came across this concerning the TPT.
I'm still new to all this, but I've never heard that the edge wouldn't slide at all.Quote:
Originally Posted by How To And Why
I've noticed with my shave ready razors that the blade digs in deep fast. You could continue to try to make it slide, but my advice is, when it grabs like that, don't keep drawing it or you'll see blood.
About the TPT: you DON'T slice. you touch the blade orthogonally to the blade length. Slicing is useless, and very dangerous.
If a blade is really sharp and you touch it with a wet fingerpad, the edge will cut hrough the fingerprint and stick into the dermis. This produces a very peculiar and recognizable feeling.
And if you retract your thumb it can feel sticky. The feeling is very difficult to describe, but very unique.
If you want to test along the length on the blade, then test at one place, retract, move a half inch and test there. do not slice. ever.
Thanks, Bruno. Your explanation of TPT is probably the best I've heard. If that's the way to do it, then I've been terribly misinformed. I've even seen demonstration videos that show people sliding their finger down the blade.
Because I'll admit it right off, I was running my finger down the blade. It probably explains why my shaves aren't whisker melting good.
That is the way I do it now too. I just touch the thumbpad down and it cuts into the first layer of skin. Learning how to strop very effectively was an important part of being able to succeed at this test.
I think what the quote on the Classic site you reference means that a proper edge will stick rather than slide across the surface of your thumb pad. I don't think it meant that if it's a proper edge it will stop in your thumb pad. I don't know if that's what you're thinking but I could see how that quote could be interpreted in two ways.
I do move my thumb pad in a short downward motion on a stationary edge just like the old barber manual posted on SRP at one time showed. So I am moving my TP over the edge slightly rather than lightly pressing. That's how I get the best feel. I've never cut myself doing this.
Two of the very best adjectives that sum up the sensation of a keen/perfect edge on a thumb pad that have been used long before I've been alive I'm sure are: "Sticky" and "Gummy". Once you feel it, it makes perfect sense.
Chris L
When I was trying to understand the TPT Randydance suggeted to me that I take a new DE blade and do it with that to get an idea of what it should feel like. As described in the previous posts on a dull blade the pad slides along while on a sharp blade it sticks.
How soon do you start checking for stickiness? Do you start at the 4k, 8k, or after stropping?
Quote:
Originally Posted by biggbadwulff
8K level.:medvl:
The way Randydance told me and the way I learned it was to do both the TNT and the TPT on the 1K or whatever you're using to set the bevel. This will give you practice at getting the feel of the TPT. Once the blade passes the TNT don't use it anymore on that blade. Stick with the TPT and when it get there popping hair off of your arm or your leg ...... if there is any hair left. :wQuote:
Originally Posted by biggbadwulff