Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    Nov 2008
    Posts
    22
    Thanked: 3

    Default 16K Shapton enough to maintain an edge?

    I'm just getting into Straight Shaving and I see a lot of posts suggesting a Norton 4k/8k combo plus a higher grit stone for honing and maintaining razors. If I'm simply maintaining an already shave ready razor and not doing restoration work, is a Shapton 16k or similar hone sufficient to start with? My wife's already looking at me with the look so I may need to start off slow. I already have a leather hone treated with CrO for my kitchen knives I could use on the razor for further edge refinement.

  2. #2
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,947
    Thanked: 13221
    Blog Entries
    1

    Default

    For simply maintaining an already "Shave Ready" edge Yes, IMHO

    Is it the best single hone choice??? Not IMHO

    Keep in mind I am a Shapton Fanatic, but, if I could only have 1 hone to maintain razors it would be a Yellow Coticule....
    Last edited by gssixgun; 01-10-2009 at 07:41 PM.

  3. #3
    Junior Member
    Join Date
    Nov 2008
    Posts
    22
    Thanked: 3

    Default

    I've read good things about the coticules and Lynn spoke well of them in his DVD. With it being a natural stone, I was a little concerned about getting one that may be a little too coarse for a final stone due to natural variations in grit between stones. Price wise it looks like a 6x2 coticule with a slurry stone (I assume I should get a slurry stone) would be about the same price as the Shapton. I'm certainly not set on the Shapton, but it seems to get a lot of good press for a finish stone.

  4. #4
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,947
    Thanked: 13221
    Blog Entries
    1

    Default

    The Shapton "Sweet 16" is a fantastic finish stone, and yet it is aggressive enough for maintaining a razor....
    Either way would work but a Yellow Coticule is way more versatile....

    I guess sooner or later it comes down to personal preference, and mine would sway toward the Shapton.... Others would go to the Coticule...

  5. The Following User Says Thank You to gssixgun For This Useful Post:

    effnish (01-11-2009)

  6. #5
    Member
    Join Date
    Nov 2008
    Posts
    31
    Thanked: 2

    Default

    Why not try something in between like a Chinese 12K? Its a great stone and cheap.

  7. #6
    Hones & Honing randydance062449's Avatar
    Join Date
    May 2005
    Location
    Saint Paul, Minnesota, United States
    Posts
    7,971
    Thanked: 2202
    Blog Entries
    1

    Default

    My choice would be a Norton 4/8 combo. It gives a lot of versatility.

    Just my $.02,
    Randolph Tuttle, a SRP Mentor for residents of Minnesota & western Wisconsin

  8. #7
    Senior Member 2Sharp's Avatar
    Join Date
    Oct 2007
    Location
    Fulton, Missouri
    Posts
    846
    Thanked: 183

    Default

    Quote Originally Posted by honersimpson View Post
    Why not try something in between like a Chinese 12K? Its a great stone and cheap.
    I don't thing the Chinese is a good choice over the Shapton or Coticle because it is a pain to get flat and takes many more strokes with your blade than the others to get the desired result.

    bj
    Don't go to the light. bj

  9. #8
    Junior Member
    Join Date
    Nov 2008
    Posts
    22
    Thanked: 3

    Default

    Thanks for the input everyone! I'm rather enjoying the discussion. Assuming I like shaving with a straight as much as I've enjoyed the research, I think I'll end up eventually trying the Shapton, Coticule, Norton Combo and probably a few more. My wife tells me I'm prone to ADs, I admit nothing

    Right now I'm leaning towards getting the following in the next month or two if all goes well:
    1. D8C - Lapping Stone (I need one anyway)
    2. 16K Shapton or Yellow Coticule (I'm still torn on the matter)

    In 6 months or so I'll probably add a Norton combo stone to the mix to round out the collection. I'm sure stupidity or a lapse in concentration will strike eventually requiring a coarser grit stone.

  10. #9
    Know thyself holli4pirating's Avatar
    Join Date
    Feb 2008
    Location
    New York
    Posts
    11,930
    Thanked: 2559

    Default

    If you're just starting and don't want to spend too much money, there are a number of options open to you. Personally, all I have been using recently are a King 1K (to set bevels; something like the Shapton 1K or the DMT 1.2K would work just as well, and if you go with the DMT you can lap other stones with it) and a BBW/Coticule combo. That's it, start to finish. There is even an article in the Wiki about using these stones together to go from bevel setting to polishing.

    While these are not the only stones I have (I've also got a Swaty and the Med and Fine Spyderco pocket stones), I have only been using the two above and I can get great edges (and great shaves) with only those two.

    If you want to start by just maintaining an edge, a coticule, 12K, Swaty (or similar barber hone), or something like the Shapton 16K would all work. While the Norton 4K/8K is a great workhorse, it would only come into the picture if you damaged the edge or wanted to start working on other blades; it's not really a maintainance stone in my eyes.
    Last edited by holli4pirating; 01-11-2009 at 05:25 PM.

  11. #10
    Member
    Join Date
    Nov 2008
    Posts
    31
    Thanked: 2

    Default

    Quote Originally Posted by 2Sharp View Post
    I don't thing the Chinese is a good choice over the Shapton or Coticle because it is a pain to get flat and takes many more strokes with your blade than the others to get the desired result.

    bj
    Hi BJ, yes your right, of course, but the 12K is cheaper as a starter stone and does a good job if you have patience.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •