Results 1 to 8 of 8
  1. #1
    Just one more lap... FloorPizza's Avatar
    Join Date
    Oct 2008
    Posts
    775
    Thanked: 142

    Default Cracked Coticule Question

    OK, I gotta start by saying that Rob from Ardennes Coticule is a class act. He currently has this Coticule Selected 150x50mm (6"x2") 50% reduction - Straight Razor Place Classifieds coticule for sale for 50% off, because it is cracked. It has a crack running diagonally from one side to the other, about half way down the length of the stone. Below is a copy/paste of a PM he sent to me after I asked if the crack would effect the sharpening ability of the coticule, or if it would just be cosmetic.

    Paste:

    Hello,

    It's an actual crack, but a closed one (so not a cosmetic fault).

    I honed some knives on the stone just to check if the crack would effect the usability of the stone and it isn't effecting the usability at all!

    But the crack is there and for that reason it isn't salable at its 100% value.

    Regards
    Rob Celis

    It took Rob less than three hours to respond to my question. Now *that's* customer service. Anyway, Rob stated that he sharpened *knives* with the coticule to no ill effects. Do you guys think that would also apply to the much thinner blade of a razor?? I *really* would like to buy this stone, but not if there's any chance of the crack affecting it's functionality as a finishing stone.

    Opinions?

    (Why do I have the feeling that I'm gonna get sniped on this stone now that I've posted this thread?)

  2. #2
    Senior Member blabbermouth ChrisL's Avatar
    Join Date
    Oct 2007
    Posts
    4,445
    Thanked: 834

    Default

    I've mixed melted beeswax and coticule powder together to form a waxy coticule paste. It worked very well to fill side cracks/saw marks in a few coticules. If I did it again I'd also heat the stone in an oven on a fairly low temp (say 200 F) to prevent the wax paste from solidifying instantly and before it could penetrate the crack.

    Chris L
    "Blues fallin' down like hail." Robert Johnson
    "Aw, Pretty Boy, can't you show me nuthin but surrender?" Patti Smith

  3. The Following 3 Users Say Thank You to ChrisL For This Useful Post:

    FloorPizza (01-12-2009), JimmyHAD (01-12-2009), onimaru55 (01-13-2009)

  4. #3
    illegitimum non carborundum Utopian's Avatar
    Join Date
    Jan 2008
    Location
    Rochester, MN
    Posts
    11,544
    Thanked: 3795
    Blog Entries
    1

    Default

    I couldn't see the crack in the stone despite the line indicating its location. I believe that as long the stone is lapped, the two edges of the crack will be level and therefore will not interfere with honing. Worse case, you could ask if Rob will allow you to return it if the crack is a problem. However, I would guess that Rob would not bother to put it up for sale on SRP unless he was confident that the hone would work. I suggest you buy it immediately before someone else beats you to it!

  5. The Following User Says Thank You to Utopian For This Useful Post:

    FloorPizza (01-14-2009)

  6. #4
    # Coticule miner # ArdennesCoticule's Avatar
    Join Date
    Nov 2008
    Location
    Hasselt, Belgium
    Posts
    76
    Thanked: 155

    Default

    Quote Originally Posted by Utopian View Post
    Worse case, you could ask if Rob will allow you to return it if the crack is a problem.!
    That's definitely not a problem!

  7. The Following User Says Thank You to ArdennesCoticule For This Useful Post:

    FloorPizza (01-14-2009)

  8. #5
    Senior Member jwoods's Avatar
    Join Date
    Mar 2008
    Location
    near pittsburgh,pa
    Posts
    468
    Thanked: 29

    Default

    i purchased a hone from rob in december, fantastic guy to deal with im very pleased with mine, rob does respond to email very fast also, and i believe he has a great return policy if you would be unhappy with your purchase, id buy it before someoe else does

  9. The Following User Says Thank You to jwoods For This Useful Post:

    FloorPizza (01-14-2009)

  10. #6
    Senior Member kelbro's Avatar
    Join Date
    May 2008
    Location
    N. Carolina
    Posts
    1,352
    Thanked: 181

    Default

    Probably will work just fine for many years. You might run into a problem if you ever wanted to sell it.

  11. The Following User Says Thank You to kelbro For This Useful Post:

    FloorPizza (01-14-2009)

  12. #7
    Just one more lap... FloorPizza's Avatar
    Join Date
    Oct 2008
    Posts
    775
    Thanked: 142

    Default

    Thanks for the help, everyone, and especially Rob. I really thought I was going to be able to talk SWMBO into this stone for my birthday (which is rapidly approaching), but I was flat out denied.

    So if anyone has been holding off on purchasing the stone while I worked this through, you have my sincere thanks, but don't hesitate to snap this bargain up.

    *sigh* you only turn 42 once..

  13. #8
    what Dad calls me nun2sharp's Avatar
    Join Date
    Feb 2008
    Location
    Kansas city area USA
    Posts
    9,172
    Thanked: 1677

    Default

    Quote Originally Posted by FloorPizza View Post

    *sigh* you only turn 42 once..
    I dunno, Ive been doing it for quite a while now!
    It is easier to fool people than to convince them they have been fooled. Twain

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •