Yes, in my opinion, you can easily dull the blade when using the Radio Shack microscope. I hadn't thought of using scotch tape to protect the edge. This was mentioned previously. But, be very careful!
Printable View
Yes, in my opinion, you can easily dull the blade when using the Radio Shack microscope. I hadn't thought of using scotch tape to protect the edge. This was mentioned previously. But, be very careful!
those scopes are a great tool. i was honing up a e-bay razor i bought for 14 bucks and could not get an edge on it, so i scoped it and found a crack in the blade! that scope also shows you when you set a nice bevel , for 12 bucks any one who hones should have one.
The scope helps me in many ways.
Several times razors just wouldn't take an edge like I thought they should. When I viewed them with the microscope, I detected little indentations or pits caused by rust, extending throughout the blade. To my eye, and even with a loupe, the blade looked good. But, under the scope, the rust could be seen honey-combing the metal to various degrees.
A few times I clinked my blade against something, or dropped it in the sink, and wondered whether I had bunged up the edge. Visually, it looked good. But, from experience I have found out visual inspection isn't the final answer. Shaving with an edge that is ever so slightly rounded or dinged is a formula for razor burn. And, the scope has given me the ability to know a blade is still in good shape without sacrificing my face to find out!
As I become more comfortable with honing, I use my scope less and less. But, I don't expect the scope to ever become unneeded and unused. :)