Results 1 to 10 of 20
Thread: Norton 8k slurry?
-
06-11-2011, 02:19 AM #1
Norton 8k slurry?
I recently took to my norton 4/8 again, in an attempt to at least get a shaveable edge from two blades. After 10 minutes of drudgery, I began thinking about the yellow coticule method of forming a heavy slurry and slowly diluting it.
I abruptly began forming a rather thick concoction of mustard on my 8k, and took the edge to it. 5 laps later, it was turning gray. Had I struck gold? I diluted a bit, continued, diluted, continued, and so on until I was honing on water again. Failed the HHT, but I still knew to try the actual shave test. Took my recently purchased Frank Revitt smiling french-point Sheffield out and drew up another slurry. Same pattern, started to turn gray rather quickly, and I diluted the through the entire process until I was honing on water. Bevel perfect (up to 30x magnification, that is), and shaving arm hair considerably well.
Enthused, I used both razors the next day on a test shave and got quite a comfortable shave. Not quite up to par with my Dovo or Boker, but those were finished on a PHIG using nothing more than the multiplicative values of Patience.
Wondering if anyone else had tried creating a heavy slurry on the Norton 8k and succeeded in any way?
-
06-11-2011, 02:24 AM #2
I don't use a heavy slurry (because I'm not partial to dilution methods), but I use a light coticule slurry on my Norton 4k and 8k. I did my preliminary writeup here:
http://straightrazorpalace.com/honin...ogression.html
-
06-11-2011, 02:38 AM #3
Know of any coticule slurry stones available?
-
06-11-2011, 02:46 AM #4
I would start with your favorite vendor and work through from there.
-
06-11-2011, 02:52 AM #5
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,544
- Blog Entries
- 1
Thanked: 3795I don't really see the point of a slurry at the 8k Norton level. This is primarily a polishing level and in general 8 to 10 strokes, sometimes up to 15, are sufficient, so I don't see any need to make it more aggressive. In fact it might be counterproductive.
-
06-11-2011, 02:53 AM #6
Thanks for the advice, Dylan!
-
06-11-2011, 02:55 AM #7
-
06-11-2011, 02:58 AM #8
- Join Date
- Jun 2007
- Location
- North Idaho Redoubt
- Posts
- 26,957
- Blog Entries
- 1
Thanked: 13223If you look at the One stone honing thread that Lynn and I did you will find mention of it, in fact if you were to go way way way back in time to the Original Coticule threads you will find a post that says "Using only one stone with a slurry to hone is by no means new or unique to a Coticule, it has been done with a Norton 8k with no problems" IIRC some guy named Glen posted it
They are several different ways to using slurries in fact there is a thread named "the Art of Slurry" that has quite a bit of info in there you might want to read
If you watch the Norton 4/8 vid I have up on my Youtube channel you will see slurry use on the 4k and the 8k...it is just another arrow in the quiverLast edited by gssixgun; 06-11-2011 at 03:00 AM.
-
The Following User Says Thank You to gssixgun For This Useful Post:
rgc58 (06-11-2011)
-
06-11-2011, 03:06 AM #9
-
06-11-2011, 03:08 AM #10
- Join Date
- Jan 2008
- Location
- Rochester, MN
- Posts
- 11,544
- Blog Entries
- 1
Thanked: 3795Do a Google shopping search for "Norton Prep Stone" and take your pick.