I see wipped dog sell norton kit sliced in half or quarter.
Products
Do you believe it's usable / appropriate for a novice ?
What would be the appropriate way to use them, I can't really imagine doing back and forth, especially on the quarter size.
Printable View
I see wipped dog sell norton kit sliced in half or quarter.
Products
Do you believe it's usable / appropriate for a novice ?
What would be the appropriate way to use them, I can't really imagine doing back and forth, especially on the quarter size.
did you read the last line?
waiting worth it.
gl
Quote:
Originally Posted by Pho3NiX
absolutely i've read it :)
The 85$ deal is what i called half-norton while the 50$ is what i call a quarter norton... well because it look like a quarter of a norton stone, and the half is double of that.
You'd recommend the half of a norton stone to be a good starting size ?
Can't you buy a brand new norton 4k/8k for $80-$90?
Quote:
Originally Posted by Pho3NiX
Maybe for the 4/8K but this is for the kit 220/1K + 4K/8K + Lapping stone.
It retail 135 on SRD.
I'm just not sure I'll go in restoration or acquire a huge collection rigth now and have a mental block at investing more in razor maintenance than in razor.
Amazon wont ship to canada.. but I might look around 100$ is a good prize.
The question is still there for me if I want to go cuticle or another stone. I'm kinda afraid of smaller size (harder to use / damage the razor).
The latest fad in honing: cutting things in half for no reason.
A few years ago here on SRP there was a trend to using narrow hones. Some guys took the 3" wide Norton and cut it in half lengthwise. Some guys felt that it was easier to hone a razor with a "smile" on the edge on the narrow hones. At that time neither the rolling X stroke, circle stroke nor the half strokes were in use/identified.
What the narrow hone is good for is to force concentration/control of the honing stroke. It works very well for a rolling X stroke but not so good for the half stroke/ Lynn's circle method.
It really is most appropriate on a finishing hone, not a coarser 1k/4K/6K. Improper honing on the coarser narrow hones can easily lead to developing a "frown" in the edge.
You may have noticed that a lot of the older natural stones, Escher, Coticule, are narrow.
Hope this helps, :D
Less is moreQuote:
Originally Posted by Disburden
That's also why half a hone costs more than half a hone
That makes sense, but the hones I saw on the linked website are cut in half the other way, making them 4 x 3 instead of 8 x 1.5 - although I just looked again and the seller says he or she will cut it that way for you as a special cut for an extra $5Quote:
Originally Posted by randydance062449
Two things:
1. Amazon _will_ ship to Canada - maybe a specific vendor won't.
2. Check the Lee Valley Tools catalog (or visit a store, if one is close to you). They stock the Norton stones that Larry (at Whipped Dog) is cutting up.
If you have a sharp razor, the Norton 4K/8K stone may be all you need to keep it sharp indefinitely. I think they're around $80 at Lee Valley. I finally bought the 220/1K and 4K/8K, after messing around with sandpaper and "micro-abrasive film" for months. No regrets.
An alternative (if your razor is already sharp) is to buy a "chinese 12K waterstone". There are several sources online. They're cheaper than Nortons, finer-grained, but are supposed to cut very slowly.
Charles [Vancouver, BC]