Page 1 of 4 1234 LastLast
Results 1 to 10 of 31
Like Tree25Likes

Thread: Bergischer Löwe Owners

  1. #1
    Senior Member ffarouki's Avatar
    Join Date
    Aug 2013
    Location
    London, UK
    Posts
    149
    Thanked: 7

    Default Bergischer Löwe Owners

    Hi guys.. This post serves as a warning to new BL owners and perhaps requesting feedback from existing ones.

    By God is this razor pretty, but what do you all think about design? That rubber strip sure looks nice. Got my razor, must have shaved with it 5 times- each drying it with a hair dry and then oiling it every time.

    Today the rubber piece moved aside by itself and behold, red rusty mist and when wiped off like black smudges underneath it.

    Which bugs me! Because when razor came the black rubber piece was immobile and there was no way to dry underneath it without loosening it which you wouldn't want to do when new. But when it starts moving you get to see the disasters it has caused.

    I know that many just cut it off before they started experiencing problems. Good decision. Now it's too late for me because it hides the damage it caused. Guess when it wears off and needs to come off for good, that's when I'll get depressed as for now it covers it well.

    Sigh

  2. #2
    barba crescit caput nescit Phrank's Avatar
    Join Date
    Jul 2013
    Location
    Toronto, Canada
    Posts
    9,660
    Thanked: 2691

    Default

    Yes - this is an old standing issue with the BL - was going to grab one myself but was told there's just to many issues with them! The rubber band being the main one. You'd think Dovo would learn by now to remove the thing or do something better. I know one vendor now who won't sell them, because they keep coming back with this issue!!

    But yes, they are a sweet looking razor!!
    Neil Miller and Dzanda like this.

  3. #3
    Customized Birnando's Avatar
    Join Date
    Feb 2010
    Location
    Oslo, Norway
    Posts
    5,079
    Thanked: 1694

    Default

    It is all in how you use and care for it, imo.
    Mine is close to four years now, and looks just as it did when new.
    The trick is to never get the tang wet.
    Bjoernar
    Um, all of them, any of them that have been in front of me over all these years....


  4. #4
    Senior Member ffarouki's Avatar
    Join Date
    Aug 2013
    Location
    London, UK
    Posts
    149
    Thanked: 7

    Default

    I don't use water, except at the end only to carefully clean the blade 😔

    And I blow-dry it and oil it. Oh well.. Can't do more. At this point will wither try to preserve it and not use it as much, or the opposite make it my daily shaver and not care as much.

    The rubber piece will continue to cause problems no matter what I do , I believe.

  5. #5
    barba crescit caput nescit Phrank's Avatar
    Join Date
    Jul 2013
    Location
    Toronto, Canada
    Posts
    9,660
    Thanked: 2691

    Default

    Problem with these BL blades is the unknown. Of course we dry and maintain our blades, it's when we think we've done the work, and somehow something creeps in we don't know about, that the surprise of some rust occurs, and the fact is, the likelihood of condensation getting under that rubber band is much higher than a blade without it. You'd think Dovo would have tried to remedy this design flaw.

    For the experienced user who knows how to take care of a blade, chances are minimal. As was explained to me by Phil at the Classic Edge, it was all the beginners who purchase this blade, rust occurs, and suddenly he's got lots of these blades coming back in to deal with...it's just not worth the headache to sell these blades....bad customer experience, much larger investment in time and resources to "fix" what shouldn't have to be fixed.
    Neil Miller likes this.

  6. #6
    Senior Member blabbermouth
    Join Date
    Apr 2008
    Location
    Essex, UK
    Posts
    3,816
    Thanked: 3164

    Default

    I have had other razors, NOS though, that have rubber sleeves, notably filarmonica and boker razors. Although some had particularly tight fitting sleeves, a little ingenuity got them all movable, after which I used a rust resistant treatment like tuf-glide. Never had an issue with them. One make (fili) was definitely inox, the others could have been too, only makes sense with a grip like this, but even inox rusts.

    I can't really see the mindset of putting one these grips on a non-stainless razor FWIW, kind of like filling life-vests with lead: pointless.

    Regards,
    Neil
    AirColorado, lz6, BobH and 1 others like this.

  7. #7
    Senior Member kwlfca's Avatar
    Join Date
    Mar 2013
    Location
    Niagara Region, Ontario, Canada
    Posts
    1,106
    Thanked: 96

    Default

    Why wouldn't you just take the rubber off...?

    Problem solved

  8. #8
    Senior Member blabbermouth
    Join Date
    Apr 2008
    Location
    Essex, UK
    Posts
    3,816
    Thanked: 3164

    Default

    Quote Originally Posted by kwlfca View Post
    Why wouldn't you just take the rubber off...?

    Problem solved
    Because it looks a bit naff? It was designed to have a certain look... presumably people buy it partly for the look.

    Regards,
    Neil

  9. #9
    Senior Member kwlfca's Avatar
    Join Date
    Mar 2013
    Location
    Niagara Region, Ontario, Canada
    Posts
    1,106
    Thanked: 96

    Default

    Quote Originally Posted by Neil Miller View Post
    Because it looks a bit naff? It was designed to have a certain look... presumably people buy it partly for the look.

    Regards,
    Neil
    I don't know what naff means, but if it were me, I'd just take the rubber off...but that's just me I suppose.

  10. #10
    Historically Inquisitive Martin103's Avatar
    Join Date
    Aug 2011
    Location
    Upstate New York
    Posts
    5,780
    Thanked: 4249
    Blog Entries
    1

    Default

    Quote Originally Posted by kwlfca View Post
    I don't know what naff means, but if it were me, I'd just take the rubber off...but that's just me I suppose.
    Naff UK slang for Poorly thought out, not to be confused with its etymology.
    Neil Miller likes this.

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •