Page 1 of 4 1234 LastLast
Results 1 to 10 of 32
Like Tree51Likes

Thread: New Razor Meisturwerk Machinen

  1. #1
    Junior Member
    Join Date
    Sep 2014
    Location
    Norway
    Posts
    4
    Thanked: 0

    Question New Razor Meisturwerk Machinen

    Hello everyone, I am new at this forum as well as to the use of straight razors and now I have just received my first straight razor from meisturwerkmachinen.com
    I choose this razor for what I think is a unique appearance and hopefully a quality razor, and because it was 70% off at the time

    Now that I have received it I was hoping to get a second opinion about it, because there is a few things I have noticed about it.

    * When I look at it from the point it seems that the cutting edge is a little warped. I am trying to show it in some pictures.
    * There is a crack in the snakewood handle by the rivet where the tang and handle meet.
    * The blade is not centered in the handle and "cuts" into the handle.
    * And the handle is made of two pieces instead of one. I don´t know if that is a bad
    thing or not.
    * Also the rivets seem a litle simple.
    *How do I know it is authentic Damascus steel?

    Is all this something I should expect from a 375$ razor?


    Her is some information given on their site:

    Meisturwerk Machinen SR-4 Straight Razor
    SPECIFICATIONS :
    *Tempered and Hardened & Fluted Damascus Steel Blade
    *Blade Hardened to HRC59
    *Meisturwerk Machinen Logo Engraved Blade
    *Hand Sewn Genuine Leather Sheath Included
    $375 USD


    Name:  IMG_3218.jpg
Views: 731
Size:  12.1 KBYou can barely see that the blade is a little curved
    Name:  IMG_3213.jpg
Views: 663
Size:  15.1 KB
    Name:  IMG_3220.jpg
Views: 665
Size:  25.1 KBYou can see a small crack by the rivet.
    Name:  IMG_3228.jpg
Views: 669
Size:  21.5 KB
    Name:  IMG_3224.jpg
Views: 682
Size:  18.0 KBReal damaskus steel?
    Name:  IMG_3230.jpg
Views: 657
Size:  19.1 KB
    Name:  IMG_3235.jpg
Views: 664
Size:  27.4 KBNot centered at all.

  2. #2
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Welcome to SRP. I have not heard of this company before. The razor does not look like it is a quality item. If you paid with paypal or a credit card, perhaps you can return it for a refund. I would suggest an entry level Dovo or something like that. Here is the SRP beginner's guide. Please note the razors to avoid list. Perhaps that company should be added ?

    Straight Razor Place Library:Books/Beginners Guide - Straight Razor Place Library
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  3. #3
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Welcome to the forum. Have to say I am no expert and have never heard of this manufacturer before.

    Yes, the blade does look like it has a warp, perhaps from poor grinding? The crack at the pivot pin (rivet) may be caused by too much tightening of the pin? The peening of the pin looks poorly done to me too. The blade should definitely close dead center and not be off center like it is. Two piece scales (handle) are normal. Can't tell you anything about whether or not the blade is Damascus steel but more knowledgable members will know.

    Personally, even for the discounted price I would have expected much better level of quality. With all those flaws I would return it for a refund if at all possible.

    Bob
    Life is a terminal illness in the end

  4. #4
    Customized Birnando's Avatar
    Join Date
    Feb 2010
    Location
    Oslo, Norway
    Posts
    5,079
    Thanked: 1694

    Default

    Hi there, and welcome to SRP from a fellow Norwegian.

    As Jimmy I'm unfamiliar with that brand.
    But from your pictures I have a sneaking suspicion that what you have bought is a razor shaped object.
    I.e. something not suitable for shaving.

    We could both be wrong though.
    Seeing as you are a Norwegian I'd be happy to welcome you over for a honing session at my home.
    Or you could send it to me via mail.
    That way I could assess it and give you my opinion as an experienced shaver and honer of razors.

    Should it prove to be a dud I'm sure I have something laying around to get you started with a proper tool until you can get yourself something functionable.
    Either way, the best of luck with your journey into the wonderful world of straight razor shaving
    Bjoernar
    Um, all of them, any of them that have been in front of me over all these years....


  5. The Following 3 Users Say Thank You to Birnando For This Useful Post:

    Maximilian (09-11-2014), nipper (09-11-2014), snorro (09-12-2014)

  6. #5
    Senior Member Dzanda's Avatar
    Join Date
    Sep 2013
    Location
    Southeastern Virginia, USA
    Posts
    706
    Thanked: 155

    Default

    That's a travesty! I sure hope that you can get your money back

    Good luck!
    gssixgun and Wullie like this.
    When you are dead, you don't know that you are dead. It's difficult only for the others.
    It's the same when you are stupid.

  7. #6
    Senior Member Phoenix51's Avatar
    Join Date
    May 2014
    Location
    S.E. Tennessee
    Posts
    658
    Thanked: 109

    Default

    Not quite sure what you have here but I will guess this razor was made by someone else and rebranded. This company is selling everything from watches to razors to clothing to Ducatis!!!...they seem to have their base in Boston. CEO is some guy named Mitchell Button (of whom I have never heard). Their razor collection vaguely reminds me of a product being made out west...no idea if there is a connection though.

    Good luck with this one.
    gssixgun likes this.

  8. #7
    Moderator Razorfeld's Avatar
    Join Date
    Jul 2013
    Location
    Forest Grove, Oregon
    Posts
    5,152
    Thanked: 1226

    Default

    Birnando is a truth speaker. For the price could have been close to a custom razor. Take him up on honing or a lender. Great knowledge at your fingertips from him.
    Wullie likes this.
    "The sharpening stones from time to time provide officers with gasoline."

  9. #8
    At this point in time... gssixgun's Avatar
    Join Date
    Jun 2007
    Location
    North Idaho Redoubt
    Posts
    26,948
    Thanked: 13221
    Blog Entries
    1

    Default

    I am not so PC as everyone else

    GET YOUR MONEY BACK !!!!

    Use whatever means you have to



    ps: Welcome to SRP hopefully B will get you all squared away on shaving with a real SR

  10. #9
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    Gssixgun. Said it best , no bull get your money back. Finding this site first and asking would have saved the trouble , but your not the first one. Good luck and let Birnardo help you out , fine gentleman who will steer you straight , pun intended. Tc
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  11. #10
    Senior Member blabbermouth Substance's Avatar
    Join Date
    Jun 2013
    Location
    Gladstone QLD AUSTRALIA
    Posts
    3,245
    Thanked: 804

    Default

    yeh certainly looks like rubbish for a $20 box cutter let alone a $375 str8
    which would buy you almost any new razor you want
    Gotta agree get you your money back no mater what this is a non-usable warped blade
    Geezer likes this.
    Saved,
    to shave another day.

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •