Printable View
Hello, I bought this razor. On my first shave with it the zebrawood started to come apart. specifically the edges of the scales started to peel back. It was almost like the individual threads in the wood were starting to peel away. Has anyone else had this issue?
http://www.bladehq.com/imgs/shaving-...e-jm-large.jpg
How about a picture of your actual razor and the damage?Quote:
Originally Posted by Jet335
Welcome to SRP!
I cant comment on the zebra wood scales but the Timor (Giesen & Forsthoff) is on the SRP list of razors to avoid.
http://straightrazorpalace.com/srpwi...azors_to_Avoid
what he said^^^^^TcQuote:
Originally Posted by markbignosekelly
We really need to see some pics of the "threads". If it is thread like and peeling from end to end, I would guess the wood was not properly protected. There is a reason this razor is on the do not buy.
However, it may be rescued with some CA glue. Super gluing scales is not difficult but does take a bit of effort and time. If you have not done a CA job do not worry. If you screw up you can always sand it out and start over:D
How do you add an image?Quote:
Originally Posted by rolodave
Have the jpg on your hd
click reply to thread
put in any words you want
click on the Insert image third icon from right
on pop up click select files
click on image you put on your hd
click upload
Without seeing pics, here is my best thinking.
They probably didn't sand it well as well as failing to put a proper finish on it.
Options:
1. Order a new set of scales if you are willing to learn how to do the pins. Not hard, though nothing is super easy the first time.
2. Refinish the scales yourself.
a. Open the razor and wrap the blade with a rag or something you don't mind being cut. Protect the blade and yourself from the blade.
b. Go to Amazon and order a variety pack of sandpaper going up to at least 220 grit, sonme 00 steel wool as well as a small container of Birchwood Casey Tru-Oil.
c. Alternatively, go to the store and get the same variety pack of sand paper, steel wool and a wood finish. I would advise against boiled Linseed oil as it takes forever to dry.
Some folks on here recommend super glue, such as Gorilla Glue gel for the finish.
Now, sand the scales until the damage is gone. Follow the directions with the wood finish.
These are some somewhat simplified options, though it is a less expensive razor. If it will shave well then this isn't that big of a deal.