Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Senior Member bmf2001's Avatar
    Join Date
    Jan 2011
    Location
    Corona, CA
    Posts
    100
    Thanked: 8

    Default New scales compared to Vintage scales

    I have been researching straight razors for a while now, due to being a newby to straight razor shaving, and I have noticed that with the vintage razors that are for sale the scales are usually described in detail as straight with even spacing on the sides, etc. as well as allignment issues, scratches, etc.

    I assume the excellent condition of the scales is mentioned simply because it ups the price of the vintage razor or should the scales be perfect on all razors especially the brand new ones from the factory?

    I recently received the Dovo Inox Pearlex 5/8 from Straight Razor Designs and noticed that when closed there is definitely more space on one side than the other as if that scale is bowed outward. Is this normal and acceptable for a new razor or is this normal for Pearlex scales?

    Thank you

  2. #2
    Senior Member blabbermouth
    Join Date
    Apr 2008
    Location
    Essex, UK
    Posts
    3,816
    Thanked: 3164

    Default

    You should see my new(ish) Dovo Prima Klang! It has ebony scales that are too chunky, and it looks as if the tools at the Dovo factory broke and they finished my scales off with their teeth - horrible ragged ends. Things aint what they used to be!

    I should have sent it back, but it was a present, and I don't like to disappoint...

    Regards,
    Neil

  3. #3
    May your bone always be well buried MickR's Avatar
    Join Date
    Jun 2010
    Location
    Brisbane/Redcliffe, Australia
    Posts
    6,380
    Thanked: 983

    Default

    It's a bit hard to know for sure what you mean about your Dovo. Is the scale on one side seemingly bowed out? Or is it that the razor is closing slightly off centre, but still isn't likely to contact the scales when closing?
    Your Dovo IMoP (pearlex) is, I am assuming, the same as mine with a bracer pin set back from the tang pivot pin, this might be the cause of some distortion. However my own Dovo IMoP has no issues cosmetic or otherwise and it is 18 years old or there abouts.
    I can't really say much more than that from my personal experience...I'm not an expert, and others may have a better understanding of the issue and be able to help better.


    Mick

  4. #4
    Senior Member bmf2001's Avatar
    Join Date
    Jan 2011
    Location
    Corona, CA
    Posts
    100
    Thanked: 8

    Default

    MickR - I say the one scale is bowed out because the other scale is perfectly parallel with the blade with even space all along that side.

  5. #5
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,736
    Thanked: 5016
    Blog Entries
    4

    Default

    We live in an age where imperfection appears to be the norm. In the old days they wouldn't tolerate it. Both Dovo and TI have had recent issues with quality control. You should see the pin job on my TI Thiers limited edition. It looks like a chimp assembled it.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  6. #6
    Senior Member ganboyi's Avatar
    Join Date
    Dec 2009
    Location
    Taipei, Taiwan
    Posts
    485
    Thanked: 715

    Default

    I agree with you and don't buy newly made razors any more. It's happened to be twice, shoddy scales and an imperfection with the blade. When complaining to vendors who sold these razors to me I was accused of looking at a razor as a piece of "jewelry" or "a work of art" and that this was a recent point of view. I was told to ignore it and accept the razor as a tool with imperfections. Yes, they are tools but it seems to me that razors today cost alot more than they used to (even when taking into account inflation etc) and ironically the quality of workmanship has declined dramatically... Anyway, a little ramble but in short I'll never buy a Wacker, Newly made Dovo, TI or even Livi when I have the option of buying something vintage that was made better as well as shaves better and is probably alot cheaper.

  7. #7
    Still learning markevens's Avatar
    Join Date
    Jun 2010
    Posts
    1,043
    Thanked: 240

    Default

    I think this is the difficulty with ordering online, instead of going in and examining with your own hands and eyes for the best, that you are relying on the seller to pick out your item for you.

    That said, SRD is an excellent company to work with. I recently recieved an hone that got chipped in shipping (manufacturer didn't place the mini bubblewrap properly inside the blue box), and when I contacted them they told me they would replace it at no cost to myself, or if I wanted to repair it (which was well within my means) they would still refund a good deal of my money.

  8. #8
    May your bone always be well buried MickR's Avatar
    Join Date
    Jun 2010
    Location
    Brisbane/Redcliffe, Australia
    Posts
    6,380
    Thanked: 983

    Default

    I think poor quality should not be tolerated, when it can be reasonably expected that a quality finish product be received. I would contact SRD to see if they will exchange it. Or contact Dovo directly with the warranty claim of faulty workmanship.


    Mick

  9. #9
    Senior Member
    Join Date
    Dec 2010
    Location
    Brisbane, Qld, Australia
    Posts
    378
    Thanked: 94

    Default

    If you want ivory or tortise shell scales it's kind of hard to get them new.

  10. #10
    'tis but a scratch! roughkype's Avatar
    Join Date
    Oct 2010
    Location
    Durango, Colorado
    Posts
    2,080
    Thanked: 443
    Blog Entries
    2

    Default

    Quote Originally Posted by ganboyi View Post
    I agree with you and don't buy newly made razors any more. It's happened to be twice, shoddy scales and an imperfection with the blade. When complaining to vendors who sold these razors to me I was accused of looking at a razor as a piece of "jewelry" or "a work of art" and that this was a recent point of view. I was told to ignore it and accept the razor as a tool with imperfections. Yes, they are tools but it seems to me that razors today cost alot more than they used to (even when taking into account inflation etc) and ironically the quality of workmanship has declined dramatically... Anyway, a little ramble but in short I'll never buy a Wacker, Newly made Dovo, TI or even Livi when I have the option of buying something vintage that was made better as well as shaves better and is probably alot cheaper.
    Anyone who could tell you to accept a tool with imperfections has never had to earn his living with tools.
    "These aren't the droids you're looking for." "These aren't the droids we're looking for." "He can go about his business." "You can go about your business."

  11. The Following 3 Users Say Thank You to roughkype For This Useful Post:

    ganboyi (01-09-2011), nubskillz (01-10-2011), pinklather (01-09-2011)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •