Printable View
What is the significance of the numbers on Filarmonica straights ? For instance I have seen two listed as #12 but one says double temple and the other says NOVODUR....
Also I recently purchased a Dubl duck Goldenedge and would like to know how old it may be?
Thanks!
The Dubl Duck Goldedge was make in the early 50s
The numbers are mostly refering to size: 12 -> 5/8, 13 -> 6/8, 14 -> 8/8Quote:
Originally Posted by Omega1975
Not all filarmonicas have a number though, Doble Temples and Novodurs happen to have a number. Both are the same blade with different finishes and scales. Novodurs seem to have fancier blades and etchings. They were, according to the etching, made for "profesionales" which in spanish culture means people that have a college degree and high salary or it can mean that they thought of "barbers" as "profesionales".
When I was new one of the guys with many decades of experience told me that Novodur was just a new branding for the Doble Temple model. I don't recall ever having a Novodur, so I can't really confirm whether the grind is the same.
I have also seen mentioned thatQuote:
Originally Posted by dps
#12 -> 12/16"
#13 -> 13/16"
#14 -> 14/16"
but I am not sure if that is true, I am yet to see NOS Filarmonica to measure for sure.
Well, there's a fair bit of variation in size for the #14. The #12 are a 5/8 razor and the #13 are a 6/8 razor. There are small differences from one to another, some are on the 'lighter side' and some are on the 'heavier side' for the size, but for all practical purposes those are the standard sizes that they handle like.
The #14 is anything from 7/8 to 8/8.
Also I don't count the ones that classicshaving had - to me it's a different razor altogether even if it came out of the same old blank.
Thanks Gentlemen that was really helpful.
14/16 never heard of that specific fraction. Usually its 13/16 or 15/16. Basically these fall a little short of 7/8 and 8/8 respectively. Have a Filamonica Sub Cero singing SR. Great shaver. I did ask about those and the most hunted is EPBD, Sub Cero,...Have not tried the 2nd brand SR
I have a Filarmonica Subcero that hasnīt been used. It measures 8/8 exactly. I havenīt seen a Double Temple or a Barbas Duras bigger than 8/8 either.
My Subcero has some staining on the blade, and sadly it has a small chip on the edge. I have been agonizing over whether to "bread knife" the edge to
put an edge on it or just leave it as is. The edge grind of the Sub seems even finer than the Double Temple. Probably a Tenor as far as singing razors go ;)
I also noticed that the older Double Temple razors weigh more than the newer ones. They have more heft but are the same size.
bread knifing is very drastic method to fix edges. You can start thread about your razor and you will get good advise on how to deal with the issue.Quote:
Originally Posted by bonitomio