This is a TI razor that I bought recently, if you check the pictures, it seems for me that the blade is not equal on both sides of the head. I dont know if that will be a problem when honning in the future
What do you think??
Printable View
This is a TI razor that I bought recently, if you check the pictures, it seems for me that the blade is not equal on both sides of the head. I dont know if that will be a problem when honning in the future
What do you think??
On the last pic it seems there is a slight bend (or the grind is off as you stated) to the right. Honing will not be a problem but you will have uneven bevels most likely.
Thank you mainaman,, yes the last picture is the one that can show the issue more clearly... but what can I do?? does that mean that I have hone the left side removing the steel until is equal to the right side and then set the bevel??Quote:
Originally Posted by mainaman
just hone as you would any other razor, only one sire ill have wider bevel than the other. I think the bend is not too pronounced so the difference in bevel widths may be even unnoticeableQuote:
Originally Posted by ledemon
I have a couple razors that were alot more noticable than that and the bevel difference was barely noticeable.