Anyone have any exp. with Dorco DE blades?
I was offered 400 for $50.00
But I have to take them all -or nothing!
Any good ? or should I pass on them?
Printable View
Anyone have any exp. with Dorco DE blades?
I was offered 400 for $50.00
But I have to take them all -or nothing!
Any good ? or should I pass on them?
It works out to about 13 cents per blade- can you get them anywhere else for a better price per blade?
EDIT: And do you even like Dorco's? That's an important part of it too :D
There are rwo types of Dorco blades. The ST-300 and the ST-301.
Most users (me included) seem to prefer the 301. They tend to be sharper from the start and last a bit longer.
That's actually kind of pricey for Dorcos. St-301s, which are fairly smooth and sharp shavers, can be bought for about 10 cents a blade from some sources. And you should NEVER buy a huge stock of blades if you don't know if you like them, unless they are premiums like Swedish Gillettes or Feathers--you can always get rid of those later. Dorcos? Not so much.
i tried dorcos, im not too happy they seem to dull fast and dont shave as good as the personas or derbys. i tried the drebys so fatr they are the best for my face, the dorcos dull fast and have to replace them faster, thats why they are cheaper.
I do use the Dorco ST-301 but I wouldn't say I do most often. I use Gillette 7O'clock Sharpedge and Israeli Personnas the most.
Keep in mind that more often than not it is finding a blade that matches the razor. That may sound silly but trust me some blades work in some types of razors and others don't.
A lot of it can also depend on you. I know a guy who has very senstive skin who can't use the very "sharp" blades like say a Feather. They cause him too much irritation.
If you have not been shaving long, let me suggest you try a few blades to see what works for you before you make a large purchase.
I agree. If you haven't used them before, don't buy that many. Now if you happen to know where I can find 400 Iridiums for $50, let me know:D
Personally, I'm not much on Dorco blades. They seem a little rough and don't last long (to me). I also don't like Feather blades, so go figure.:shrug:
I would not go buy 400 of anything, especially if you have not used them and a whole lot of others to decide which you really like.
Ive used the 301 and they are OK - not super sharp but they are not harsh on your face either, which is good for a newbie. I had to make too many passes to get a close shave with them so I prefer a sharper blade. The Gillette Swedes and Iridiums are good, but more expensive. As far a budget blades, a lot of folks seem to really like the personnas. I would buy a sampler package from one of the vendors here and try all the blades.
Once you have narrowed down what you like, then consider a larger bulk purchase.
Just me recommendation. You dont want to spend $50 on someones recommendation and the find out you dont like the blades:cry: One persons favorite may be one that YOU will not like at all! Al faces are different and your likes of a particular blade will change as your skills improve so don't get locked into a single blade just yet!
One of the worst blades I ever tried but I have read of others who liked them. :shrug:
Thanks for all the replies guys!
Think I'll try one of the sampler packs and try out a bunch and see what I like best.
Smart Decision! Have fun trying them out - do not use one for more than 2 shaves (my recommendation) until you really get the hang of it - you want to compare the blades at their optimal performance levels, not when they are deteriorating. Spray or dip the blade in as pure rubbing alcohol (isopropopal) that you can get - it will prevent rusting of the edge between shaves! a bottle available everywhere is about $1.
Keep a written log of your thoughts of the blades as you use them in various categories as you will forget over time and not remember your thoughts of a particular blade. It will just help you to remember which you liked and why and not confuse the blades!
..I don't know that I would exactly agree with everything you wrote. Everyone has their own way, of course, and people should choose what works best for them. I was given some very good advice when I first started, though, and I would like to pass it on. Follow it as you will.
1. Use blades till they don't work well for you. If that's one shave, it's one shave. If that's four shaves, it's four. It really helps you get to know how long a blade lasts, which is important for knowing which blade is right for you. Also, as your skill improves, your attitudes will change about blades. It will help if you avoid jumping form blade to blade too much at first, so you can concentrate on TECHNIQUE rather than blades.
Honestly, when you are starting out, comparing blades should be the least of your worries. Start with a simple, good blade--Derby, or Dorco 301, and stick with it until you are able to give yourself a reasonably good shave. Then you can start experimenting with different blades for your "finishing touch".
2. There is absolutely no need to worry about stainless steel blades rusting, unless you store them in a really humid environment for AGES. The few days you will have them in your razor is not enough time for stainless steel blades to rust. Carbon steel is another matter, but even then--a few days in your razor should not be a problem.
First and foremost, technique technique technique. 0 pressure, the right angle, and knowing your beard growth pattern. Also, lather lather lather. Practice lather when you aren7t shaving. Blades are actually near the bottom of the list when it comes to DE shaving...
The most important thing, above all, is ENJOY YOUR SHAVE!
yeah, Dorcos are alright, it really depends on a lot, like how thick your beard is. It works pretty well on a thin beard, but I wouldn't expect it to last long or give a close shave on thick stubble.