Page 1 of 3 123 LastLast
Results 1 to 10 of 24
  1. #1
    Senior Member souschefdude's Avatar
    Join Date
    Aug 2010
    Location
    Berks County PA
    Posts
    1,214
    Thanked: 180
    Blog Entries
    1

    Default Ripped my face to shreds

    I have been using Straights for the last few months, but I also have a DE for those days when I don't have time for the whole ritual. Today was one of those days. I put a new Feather DE in my vintage Gillette adjustable, set to 7 and went to it. Light pressure, skin stretched, nice and easy, yada, yada. I finish and and I can start to see blood in a few different areas of my face. Apparently the blade I used had some sort of defect and tore me to shreds. Glad I only had time for one pass.
    Anyone else ever have this? Do I need to inpect each blade before I use them?

  2. #2
    The Assyrian Obie's Avatar
    Join Date
    Mar 2009
    Location
    Milwaukee, WI
    Posts
    11,145
    Thanked: 2755

    Default Ripped My Face . . .

    Hello, souschefdude:

    Did you make sure the razor head was closed firmly enough so that the blade would not wiggle around? Because a loose shave head is an invitation for nicks.

    Also, sometimes when the razor angle is off slightly, that, too, can result in cuts. That in addition to excessive pressure. Let's not forget proper beard preparation.

    When using a double edge safety razor, you still cannot rush the process. Yes, you can shave faster with a safety razor than with a straight, but just how much faster is the question.

    Finally, yes, your blade could be defective.

    Regards,
    Obie

  3. The Following User Says Thank You to Obie For This Useful Post:

    niftyshaving (12-04-2010)

  4. #3
    Senior Member blabbermouth JimmyHAD's Avatar
    Join Date
    Feb 2008
    Posts
    32,564
    Thanked: 11042

    Default

    Do you use the multiple pass gradual stubble removal technique described here ? IOW. not trying to get it bbs in one pass. Doing two or three passes with no pressure is usually more comfortable whether shaving with a DE or a straight.

    The Feather, IME, can be a harsh blade although it is one of the sharpest. Many guys recount that the first use of a Feather can be irritating and that they improve on the second and third use. Some actually began "corking" the new blades before first use. I've not tried that, preferring to dull the blade with whiskers, though it may be a viable option.

    Also beginning with a Fatboy set at 7 is a pretty aggressive setting. Might be fine for you but try going to 5 and see what happens. Some guys find that a less aggressive setting on the first pass is more forgiving. Increase to the higher setting for the follow up. If you have an eye loupe or a microscope give the edge a look. It may be defective but FWIW getting weepers when I used to shave with my go to DE, the Merkur Slant with a Feather was the norm more often than not.
    Be careful how you treat people on your way up, you may meet them again on your way back down.

  5. #4
    Senior Member souschefdude's Avatar
    Join Date
    Aug 2010
    Location
    Berks County PA
    Posts
    1,214
    Thanked: 180
    Blog Entries
    1

    Default

    I was rushed for time, but I was not rushing.
    What I mean was I knew I would not get to do a full BBS shave, wasn't even going to try. Just didn't want to walk out the door with a 3 day growth, and was only going for one pass to knock off the ugly.
    It wasn't weepers that I got, it was out and out scrapes. The blade was closed tightly, I believe, and I've used it at 7 before. I'm not sure what you mean that 7 is aggressive, on mine the blade is fully curved at 9, and almost flat at 1. Isn't flat the agrressive setting?
    I was using very light pressure, nice and slow pace.
    I have since looked at the blade under my loupe, it does look like one corner of the blade may not be 'rounded' properly. It would explain the lovely pattern on my face. (looks like a cat got me with a big swipe). The pattern follows the strokes I was using.

    THanks for the inputs...

  6. #5
    Senior Member rodb's Avatar
    Join Date
    Apr 2008
    Location
    Saint Paul, Minnesota, United States
    Posts
    2,943
    Thanked: 433

    Default

    9 is the most harsh, 1 is gentle on the Gillette's, I use 3-4 usually.

    It does sound like a blade or an un-centered blade issue

  7. #6
    Senior Member Pops!'s Avatar
    Join Date
    Feb 2010
    Location
    Los Angeles, CA.
    Posts
    1,672
    Thanked: 275

    Default

    i use a gillette slim adjustable.. and get a very comfortable shave with it set on 3.. i set it higher if i have more than one day of growth.. with 3 days stubble.. i'd go with a 5 or 6...

    either way.. it does sound like a defective blade..

    and on a side note... if you're using your de for single pass shaves on days when you are pressed for time.. why not switch to a more forgiving blade.. perhaps a u.s. made personna

  8. #7
    Bow Fishing Now ! blugill's Avatar
    Join Date
    Nov 2010
    Location
    Kaufman, Texas
    Posts
    709
    Thanked: 138

    Default

    That's why I won't go back to DE's

  9. #8
    The Assyrian Obie's Avatar
    Join Date
    Mar 2009
    Location
    Milwaukee, WI
    Posts
    11,145
    Thanked: 2755

    Default Ripped My Face to Shreds

    Gentlemen:

    Even though I shave with the straight razor, my beloved double edge razor continues to hold a spot in the rotation. It works out to about every seventh shave going to the double edge.

    I enjoy comfortable and close shaves with it, without nicks or cuts. I admit I am as careful with the double edge as with the straight edge. To be without my double edge is inconceivable. Each type of razor in its own place, is what I say.

    Regards,

    Obie

  10. The Following User Says Thank You to Obie For This Useful Post:

    Pops! (12-04-2010)

  11. #9
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    Quote Originally Posted by Obie View Post
    I enjoy comfortable and close shaves with it, without nicks or cuts. I admit I am as careful with the double edge as with the straight edge. To be without my double edge is inconceivable. Each type of razor in its own place, is what I say.
    My friend Obie speaks wise words. Too often we hear that a lot of people use a DE "when rushed for a quick shave". While it's true that a DE shave may take less time overall than using a SR, rushing with any razor is a surefire path to nicks, cuts and irritation. Which is too bad, as DEs are capable of giving outstanding shaves.

    Setting 7 on a vintage Gillette can be overly harsh. With a moderately sharp blade I'll typically start at 5; with a Feather blade I may dial it down to a 4. Seems to work fine for me.

    I can't remember who it was but someone here was recommending using a Fat Boy with a Feather dialled all the way to 9.... I can't say I've tried that one yet...

  12. The Following 2 Users Say Thank You to Ryan82 For This Useful Post:

    Obie (12-04-2010), Pops! (12-04-2010)

  13. #10
    Senior Member Pops!'s Avatar
    Join Date
    Feb 2010
    Location
    Los Angeles, CA.
    Posts
    1,672
    Thanked: 275

    Default

    yes.. as always.. obie speaks wise words.. i'm mainly an artist club user.. but i shave with the de for the variety it brings.. not for the speed factor.

  14. The Following User Says Thank You to Pops! For This Useful Post:

    Obie (12-04-2010)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •