Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    May your bone always be well buried MickR's Avatar
    Join Date
    Jun 2010
    Location
    Brisbane/Redcliffe, Australia
    Posts
    6,380
    Thanked: 983

    Default DE and ingrown hairs

    Right, time to put on the thinking caps and offer up some possible solutions. I shave mostly with a cut-throat (CT) razor these days, but did add a DE razor into the rotation shortly (About 3 months) after stepping into the world of straights. I was at a point with the CT's where I wasn't getting quite as satisfactory a shave as I wanted, but was getting better every day. The DE was giving me a slightly better shave. All that has been turned around for sometime now and I get the best shave from the CT.
    The problem I noticed, and one that took a while to figure out the cause of, is that I was getting a few ingrown whiskers here and there, but more than usual. Not as bad as I had ever gotten with the trusty M3's, but still...The CT and DE's were supposed to be the end of ingrowns.
    It seems to me that I have now narrowed it down to the DE as the cause. If it is going to be noticed, it will be as soon as a day after a DE shave. My usual methods are to shave after a hot shower, building a lather on the face before commencing to shave first with a N/S pass, then with a S/N pass ignoring the various direction of hair growth. The ingrowns occur randomly so it seems direction of growth may be irrelevent.
    Might this be a pressure issue? Blade issue? Or any number or combination of things?
    It isn't a big enough problem to stop me using the DE, but it is bloody annoying, especially as the DE comes in handy when I don't allow quite enough time for a CT shave. And I like having it in the regular rotation.

    Thanks for any help and advice Gents,


    Mick

  2. #2
    The Assyrian Obie's Avatar
    Join Date
    Mar 2009
    Location
    Milwaukee, WI
    Posts
    11,145
    Thanked: 2755

    Default DE and Ingrown Hairs

    Hello, Mick:

    Often going against the grain will result in promoting ingrown hairs. Also, your razor might be a touch dull, which would result in pulling than cutting. When the whisker is pulled by the razor, possibly, from the root, it has to grow again. Sometimes it grows in swirls under the skin. That results in ingrown hair. Going against the grain also will result in a measure of tugging. If possible, avoid going against the grain.

    Of course, there are other reasons. Keeping the pressure light, for instance, is beneficial all around. So is limiting shaving strokes over the same spot. As always, as you know, a good preparation works wonders for a healthy and comfortable shave.

    Regards,

    Obie

  3. The Following 2 Users Say Thank You to Obie For This Useful Post:

    MickR (12-07-2010), salazch (01-15-2011)

  4. #3
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,737
    Thanked: 5016
    Blog Entries
    4

    Default

    You might want to consider experimenting with different blades and also watch your angle. Angle is usually not a consideration to many DE users but it can be critical.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  5. The Following User Says Thank You to thebigspendur For This Useful Post:

    MickR (12-07-2010)

  6. #4
    Senior Member Brando's Avatar
    Join Date
    Jan 2010
    Location
    Suburb of Chicago
    Posts
    637
    Thanked: 184

    Default

    Any time I have used a new razor I would get in grown hairs mostly neck area, try alum block, it was the end of in grown hairs for me. Heres a link a member passed on to me Barber's Alum 'Þap' (70g - 2.5oz) (Barber's Alum 'Sap' (70g - 2.5oz)): Tulumba.com

  7. The Following User Says Thank You to Brando For This Useful Post:

    MickR (12-07-2010)

  8. #5
    Member
    Join Date
    Sep 2010
    Location
    Balboa Island, Newport
    Posts
    49
    Thanked: 7

    Default

    I'd also make sure that the new blades you are using are disinfected via rubbing alcohol before use.

  9. The Following User Says Thank You to DrLongandStrong For This Useful Post:

    MickR (12-07-2010)

  10. #6
    Sardaukar salazch's Avatar
    Join Date
    Jan 2010
    Location
    Salt Lake City, Utah
    Posts
    444
    Thanked: 57

    Default ok its not just me!

    I also noticed that my ingrown hairs were not as bad with a straight razor, but seemed worse with a DE. I'm still learning so it's probably angle and blades, but I thought it was just me.

  11. The Following User Says Thank You to salazch For This Useful Post:

    MickR (01-15-2011)

  12. #7
    Indisposed
    Join Date
    Oct 2008
    Posts
    6,038
    Thanked: 1195

    Default

    Quote Originally Posted by salazch View Post
    I also noticed that my ingrown hairs were not as bad with a straight razor, but seemed worse with a DE. I'm still learning so it's probably angle and blades, but I thought it was just me.
    Yup - angle, blade and pressure. Something else to consider: the number of shaves per blade. I'm more likely to get weepers or irritation from a blade that is past its best-before date. That is why, like Obie, my general rule is 3 shaves per blade.

  13. The Following 3 Users Say Thank You to Ryan82 For This Useful Post:

    MickR (01-16-2011), Obie (01-16-2011), salazch (01-16-2011)

  14. #8
    Well Shaved Gentleman... jhenry's Avatar
    Join Date
    Dec 2009
    Location
    Indianapolis, IN
    Posts
    3,860
    Thanked: 3760

    Default

    I usually use a DE blade for 5-7 days before replacing it with a new blade.

    I also use that occasion to clean my DE razor using shampoo and a toothbrush, then drying it with a paper towel.
    "Age is an issue of mind over matter. If you don't mind, it doesn't matter." Mark Twain

  15. #9
    Senior Member
    Join Date
    Jun 2010
    Posts
    279
    Thanked: 70

    Default

    What kind of DE are you using?

    I've found, an open comb is the easiest to learn on and allowed me to get the proper angle. If it leaves tracks from the teeth, you have the wrong angle. You'll see a nice clean path when the angle is right.

  16. The Following User Says Thank You to pz93c For This Useful Post:

    MickR (01-16-2011)

  17. #10
    May your bone always be well buried MickR's Avatar
    Join Date
    Jun 2010
    Location
    Brisbane/Redcliffe, Australia
    Posts
    6,380
    Thanked: 983

    Default

    My issues are now fairly minimal. Due entirely to all the advice I've recieved, but to answer your question I use a Merkur HD.


    Mick

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •