Page 1 of 2 12 LastLast
Results 1 to 10 of 14
Like Tree2Likes

Thread: Looking to get started with a DE

  1. #1
    Member
    Join Date
    Sep 2011
    Location
    Stockton, CA
    Posts
    58
    Thanked: 10

    Default Looking to get started with a DE

    I just picked up a Gillette Super Speed today, cant seem to find much about this one because it it made in England, has no date code, and I guess they used different model names. I cleaned it all up, stopped by CVS picked up a pack of house brand blades just so I had something to try. I have never shaved with a DE or anything other than these ridiculous expensive cartridges. So far I have found a decent shave cream for my current set up, Jack Black Beard Lube, and their After Shave Balm. I have gone through nearly 40 locally available products in various combinations to try to get rid of razor burn and bumps.

    What do I need? Info, first. Can someone point me in the direction of good videos or how-to's?

    Blades. I know it is very personal, but is there a general range of blades that work well in this razor?

    Soap/Cream. I have oily skin to begin with, and I work in construction so I sweat a lot. I have very sensitive skin as well, so much so that even electric razors give me horrible razor burn. What would be a good starting point for every other day use? I have thick growth with coarse texture. Budget is a concern.

    The razor itself. Is this Super Speed a good one to start with? I only paid $5.00 for it at the flea market, so no big deal. But if you have a recommendation, again for the budget mineded, please do offer it.


    Lastly, I don't know what I dont know. Anything else I should be taking into consideration, equipment needed, things to look for?


    Thanx in advance for any info you are able to provide.

    -Xander





    ETA: Found some more info about this razor...

    "#18: English Super Speed; this uncommon razor is modeled after the American 1954-1957 Super Speed. Brit. Pat. 694093 and II marks, 57 grams."

    "While not true Rockets by my definition I include these to clear up confusion in identification. These for all outward appearances look to be American Super Speeds, but have the signature pointed Rocket side plates. These "English Super Speeds" are less common than comparable Rockets and all of mine have "teeth" under head that are slightly different than the Rockets pictured above [in the post]."

    CITED
    The Shave Den Forums. Written by MTgrayling, December 2008.
    Gillette Rocket, the refined DE.
    Last edited by fast14riot; 09-26-2011 at 12:18 AM. Reason: Added info about razor

  2. #2
    Senior Member
    Join Date
    Aug 2010
    Location
    Vancouver, BC, Canada
    Posts
    1,377
    Thanked: 275

    Default

    FWIW --

    Put some lather on your face, put a blade in the razor, and start shaving. One warning:

    . . . That blade is _sharp_. Use _no pressure_ on the razor -- it is _not_ like a cartridge.

    People will talk about which DE razor is "better" forever. From what I've read and experienced, the old Gillettes were fine. I think, in a recent thread, the Super Speed was called "aggressive", so be extra careful about using _no pressure_.

    Charles

    PS -- the "Badger and Blade" website is a hangout for people who really, really care about DE razors. You might check it for reviews of the Super Speed. And check this site, as well.
    supersco and normbal like this.

  3. #3
    The Electrochemist PhatMan's Avatar
    Join Date
    Apr 2009
    Location
    Hastings, UK
    Posts
    1,714
    Thanked: 527

    Default

    fast14riot,

    The below DE video tutorials by Mantic59 are considered 'classics' in the DE Community :

    mantic59 - YouTube

    It is highly recommended to get yourself a blade sampler pack : e.g. from

    Connaught Shaving (Connaught DE Sample Packs)

    or Bullgoose (Blade Sampler Packs -BullGoose Shaving Supplies)

    or West Coast Shaving (DE Blade Sampler Pack, Choice

    The choice of a blade for DEs is intensely personal to you !

    Have fun !

    Best regards

    Russ

  4. #4
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,736
    Thanked: 5016
    Blog Entries
    4

    Default

    Razor burn is one of those things the solution for is to prevent it not make it go away once you have it. it's one of those closing the barn door after the horse runs out things. I know of no product that will stop it. Some are better than others at minimizing it but you need to develop a technique for your shaving. Whenever you get burn it means you are damaging your skin and doing something wrong.

    The main thing with the DE is using the proper angle and using no pressure. You just need to experiment and start off slow with easy strokes, nothing fancy.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  5. #5
    Member
    Join Date
    Sep 2011
    Location
    Stockton, CA
    Posts
    58
    Thanked: 10

    Default

    Thanx for the info. I will check out those videos for sure. A blade sampler is on my list, I just picked up some cheap ones to have for now. As far as razor burn, I meant trying to get rid of the burn from happening in the first place. I have a decent technique with cartridges to minimize it and found a cream that seems to help. I guess I am looking for a cream/soap that may help a bit more, and maybe combined with an aftershave product for good results. If someone has sensitive skin as well, feel free to suggest what works for you.


    -Xander

  6. #6
    Member bjmoose01's Avatar
    Join Date
    Jun 2011
    Location
    Yellowknife, Canada
    Posts
    45
    Thanked: 8

    Default

    Quote Originally Posted by fast14riot View Post
    Thanx for the info. I will check out those videos for sure. A blade sampler is on my list, I just picked up some cheap ones to have for now. As far as razor burn, I meant trying to get rid of the burn from happening in the first place. I have a decent technique with cartridges to minimize it and found a cream that seems to help. I guess I am looking for a cream/soap that may help a bit more, and maybe combined with an aftershave product for good results. If someone has sensitive skin as well, feel free to suggest what works for you.


    -Xander
    I use La Toja shave cream for sensitive skin quite a bit, I also like their shave stick.

    One thing to consider is proper pre-shave prep. I usually do the following:

    1. Wash my face with a good soap and warm water - I use Musgo Real Glycerin Lime Oil Soap.
    2. Soak a face cloth in very hot water.
    3. I then take some shave cream and make a good lather in a mug with my shaving brush.
    4. Apply lather to face with brush.
    5. Wring out face cloth and apply to face over the lather - keep it on for 1-2 minutes. This will really help soften the beard.
    6. Wipe off face with the face cloth.
    7. Apply lather to face for the first pass with the razor - usually WTG (with the grain).
    repeat step 7 for each subsequent pass - most folks do 2-3 passes (WTG, XTG, ATG). I like to do 4 with an additional diagonal XTG - I find I can get a consistent BBS (Baby Butt Smooth) shave this way.
    8. Rinse face with cold water to help close the pores.
    9. Apply a good after shave balm - I like to use Musgo Real balm - LOVE the scent!

    I like to take my time shaving(about 20-30 minutes), so I tend to do it before I go to bed - don't have to worry about being late for work that way...

    Hope this helps.

  7. #7
    Special Agent Gibbs's Avatar
    Join Date
    Feb 2011
    Location
    Fennville, MI
    Posts
    628
    Thanked: 92

    Default

    I am surprised that there is no date code letter - number (1-4) on the underneath of the head even if it is from UK. I thought they all had them.
    ~~ Vern ~~
    I was born with nothing and managed to keep most of it.
    Former Nebraskan. Go Big Red

  8. #8
    Senior Member blabbermouth
    Join Date
    Nov 2010
    Location
    Pequea, Pennsylvania
    Posts
    2,290
    Thanked: 375

    Default

    I just started using Portland General store Shave soap and After shave, the flavor is "Whiskey" I really love it. It's the only product I have used so far that has cut down on razor burn and if you do happen to get a bad razor burn you won't know it after applying their aftershave. End results are a super smooth face. I usually get razor burn do to rushing, using a blade longer than I should be, and applying pressure instead of letting the blade work it's magic.

  9. #9
    Senior Member
    Join Date
    Aug 2010
    Location
    Vancouver, BC, Canada
    Posts
    1,377
    Thanked: 275

    Default

    My bias, FWIW:

    Aftershaves won't help. "Balms" may do some good -- but it's better to avoid skin damage altogether.

    You need a lubricant on your skin, better than lather. Two possibilities:

    . . . Before lathering, put a little bit of almond oil (or olive oil), or hair conditioner, or Astroglide or other "personal lubricant", on your face, and spread it around.

    . . . Make "uberlather" -- a mixture of lather and glycerin -- instead of plain lather. Do a search on this site or YouTube for instructions.


    Either of those will give your face more protection from the edge of the blade than plain lather. Subjectively, they let the razor glide more smoothly over the skin.

    You will have to experiment to find what works for _you_. But my experience is that razor burn, and pressure on the razor, go together.

    Charles

  10. #10
    Senior Member Sargon's Avatar
    Join Date
    Dec 2011
    Location
    St. Louis, Missouri
    Posts
    494
    Thanked: 36

    Default

    Your razor is the British version of the "Flair Tip" superspeed model, which was the medium aggression model ( red was more aggressive, blue less). I haven't had the pleasure of the British version, but I use a US one a lot when I travel. It is a good model.

    For videos, Mantic's videos are great, as previously mentioned.

    Blade samplers are a good way to go, but if you have a thick beard, you'll probably need blades that are especially sharp (yellow/black/blue gillettes, Astra SP, even feather are what guys with thick whiskers generally prefer). The downside is that sharp blades are easier to nick yourself with if you aren't careful, so as a new shaver it can be tricky.

    If you have sensitive skin, start with 1 or 2 with the grain passes, then try an across the grain pass, once you feel up to it, only experimenting with against the grain once you're more familiar, and are sure your face can handle it.

    For prep, be sure to soften your beard with a shower, hot towel, or, at least, washing your face with warm water before your shave.

    Here's my "super cheap but still decent" gear suggestion (you already have a razor that works well): A decent boar brush UNTRIMMED tips ( Omega, Vie-long, and semogue all make this sort of brush), arko or vdh delux soap, a 5 pack of IP red blades, a 5 pack of yellwo pack gillette blades. Oh. For aftershave? buy generic brand witch hazel from your grocery store or drug store.

    the brush will run 10-20 dollars, the soap will run 2-3 bucks, the blade packs a couple bucks per pack or so online, and the witch hazel a couple of bucks. A small cereal bowl from your kitchen works fine for lather. That's pretty much my travel kit ( us flair tip, omega boar, a couple 5 packs of blades, and arko soap), if that helps.

    Good luck, I think you'll enjoy shaving a lot more, once you give it a week or two to get used to it. It gives better shaves, and costs a lot less than electrics and cartridge systems.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •