Gillette Fatboy Cleaning - Plating Project

So I now have three Fatboy razors. This one here is my most recent pickup - thank you flea market guy for the awesome deal $2.00 !!!!!

With the price being so low on this one & the amount of plating that is missing - I decided to disassemble the razor to clean it properly and get a new plating finish on it also. The plating will be nickel just as the factory finish. If the results are satisfactory then I may consider a new plating job on my Gold Executive Fatboy - I am unsure because of pricing on 24K gold plating.

The disassembly was actually quite easy. I watched the video on YouTube and read the guide a few times. Ten minutes later it looked like this (both springs are not shown, but are safely in a baggy) - More pictures after it comes home from plating.



Attachment 91957

I'm amazed that you found a place that does nickel plating, I have a Victorian stove that I want to get done but can't find a place to do it! Probably pricey also. What do you plan on cleaning it with? I used CLR once on a DE & it worked excellent.

I have a family friend that owns a plating company. He would also be the person that would do the gold plating. I am still unsure of the costs, but I know that the nickel will be fairly cheap (especially compared to the gold plating).

To clean the razor I boiled the pieces in baking soda and alcohol and water. There was little crud build up so this razor was either taken care of or used very little. The plating could have been removed when cleaning it, being rolled around a bunch of other stuff, or anything that fits the category of not caring for it properly.

Once at the plating shop, its it stripped completely down to the bare metal. Then comes the new finish sometime today or tomorrow. Unless I pay for shipping, I wont be able to pick up the razor before Saturday. I live four miles away,and I am not in a rush to get it back - so I will get some pics over the weekend.

Quote:

---

Originally Posted by jumbojohnny

I have a family friend that owns a plating company. He would also be the person that would do the gold plating. I am still unsure of the costs, but I know that the nickel will be fairly cheap (especially compared to the gold plating).

To clean the razor I boiled the pieces in baking soda and alcohol and water. There was little crud build up so this razor was either taken care of or used very little. The plating could have been removed when cleaning it, being rolled around a bunch of other stuff, or anything that fits the category of not caring for it properly.

Once at the plating shop, its it stripped completely down to the bare metal. Then comes the new finish sometime today or tomorrow. Unless I pay for shipping, I wont be able to pick up the razor before Saturday. I live four miles away,and I am not in a rush to get it back - so I will get some pics over the weekend.

---

It pays to know people! I'm looking forward to the pics of the finished razor.

I have been wanting to take apart my slim for awhile, but it is still in decent shape. Hope it turns out how you want

I completly destroyed a perfect fatboy because of that video on youtube. It is not beginner friendly at all and the tools that were reccomended for the jobs were destructive. I was young and dumb and have never forgivin myself for watching that video and wrecking my razor. It was not beginner friendly at all. I am very glad to see your's worked out for you though. I just hope the video doesn't encourage more like me and end up causing a destruction. I would love to see it repllated though :) I have heard razor emporium does a heck of a job

Sorry to hear about that misfortune. Were you the one that posted on the comments for the video? I read that after I had already dismantled my razor, but reading the comment made me nervous (what if I got lucky with this one - not lucky with one of the others?). I didnt use the video as a how to, I used it to see the disassembly in action. There is a link to a step by step guide to break down the razor - thats what I went by.

It all worked perfectly fine for me. Damaging those threads could have been because one of two things-

1) The tool you used to hammer out the collar was too thin and therefore would have gone into the collar rather than sit on the base of it evenly. I used an old wooden dowl that fit perfectly inside the shaft and it came out with no problem. Even better than a dowl, is the handle to another old Gillette (not an adjustable though).

2) You need to press down the setting spring and turn the ring as far apart as possible. The dial should end up resting just to the left of the #9 yet still be between #1 & #9. That will lift threads as high as possible, making it much harder to come into contact with threading.

All the same I am curious about which specific piece was damaged. Could you identify it by using one fo my pictures? I have a few spare parts...maybe I have one that can save your Fatty.

yeah I was the one that posted the comments and now that I think about it they were very rude. he only put the video up as a guide and it was not his fault I screwed it up. I dont have the fatboy anymore so thanks for the offer though :)

Update please...

I picked up the razor a couple weeks ago and I have the bag of parts sitting at home, I just need to assemble the razor. I havent had much time to work on the hobby stuff lately. Work is getting into the busy time of year and with the gym added in, I just dont have the energy to do anything past 10PM.

The first couple plating attempts left some questionable spots on the center sleeve, but that has been resolved. My buddy wanted to attempt some reverse engineering and he is currently working on making his own Fatboy. It sure must be nice to have a fully equiped shop at your disposal. I gave him a cleaned up straight for his services - now I think he has RAD because he wont stop talking about razors.

I will try to get the razor reassmbled some time this week. I have a friend that is a photographer and she has agreed to take quality photos for me (in exchange for my services of repairing her original Nintendo). Stay tuned, there will be some eye candy coming soon.

Get to it!

Quote:

---

Originally Posted by TwistedOak

Get to it!

---

I know and I admit that I have been lazy the last few weeks.

I am just too dedicated to the weight loss program I started. I am down 26 pounds in four weeks!!! I was never a "fat" person, but I got a little flabby and I needed to get back to college form. Next up will be the conditioning and strength training. Ready or not six pack muscles here I come!

Quote:

---

Originally Posted by jumbojohnny

Ready or not six pack muscles here I come!

---

I had a six pack abs once.... used a sharpie! It is MUCH easier that way

As usual I get caught up in other projects before giving the results for ones I wrap up.

The nickel plating is factory finish spec. It looks amazing! Pictures do no do justice compared to having it in hand. I could not have asked for anything better.

Plating was done by
B.A.R. Plating
Meriden, CT

The owner (family friend) said that he is willing to do other plating for anybody that is interested. I could not find any other place that would even care to consider doing the job. I had one place laugh at me and use some profanity when hanging up on me...So I am very grateful for B.A.R. doing this for me - and the others that I am prepping.


So let me show you all some pictures:

These are the parts after I got them back:
http://i756.photobucket.com/albums/x...122DBD9F34.jpg
http://i756.photobucket.com/albums/x...1228EFA43A.jpg
http://i756.photobucket.com/albums/x...22B7A143-1.jpg



Here is the razor put back together and fully functional - I used black enamal for the numbering and dots :
http://i756.photobucket.com/albums/x...3344EF49-1.jpg
http://i756.photobucket.com/albums/x...123C31316E.jpg
http://i756.photobucket.com/albums/x...1237DA4972.jpg

Looks Great, now you have me thinking....thanks for the update. can't wait to see the other project you have going.

Quote:

---

Originally Posted by Razorburn

Looks Great, now you have me thinking....thanks for the update. can't wait to see the other project you have going.

---

Next up is finish pinning about six straight razors. I made the scales and the wedges or spacers, but I havent pinned them yet.

In terms of this Fatboy, I will be making a custon box to house it. I have the original plastic case, but its in bad condition. I plan on taking the plastic try insert out of the original case & placing into the new box once built. I am going to build the box with some burl - maybe Amboyna if I can find a large & affordable piece to work with.

Damn that looks nice!

I just gave my FB another go today (last attempt wasn't impressive on a 4), now I'm quite pleased at setting 7. Came on here looking for ways to maintain/clean it on a regular basis. Now I'm wanting to get it re-plated lol

I'll have to look up your friend and see what he would it would run me.

Thanks!

Quote:

---

Originally Posted by jumbojohnny

Next up is finish pinning about six straight razors. I made the scales and the wedges or spacers, but I havent pinned them yet.

In terms of this Fatboy, I will be making a custon box to house it. I have the original plastic case, but its in bad condition. I plan on taking the plastic try insert out of the original case & placing into the new box once built. I am going to build the box with some burl - maybe Amboyna if I can find a large & affordable piece to work with.

---

Here's a box that I made if you want some inspiration ( http://straightrazorpalace.com/custo...azor-case.html ) maybe about 2¢ worth in material.

Quote:

---

Originally Posted by Baxxer

Here's a box that I made if you want some inspiration ( http://straightrazorpalace.com/custo...azor-case.html ) maybe about 2¢ worth in material.

---

That is an awesome box. I could only hope I turn out something similar.

Quote:

---

Originally Posted by jumbojohnny

That is an awesome box. I could only hope I turn out something similar.

---

Well, good luck and don't forget to post the pictures when you're done.