Printable View
New to wet shaving and have been busy collecting and restoring straights. Since I'm out and about searching for treasures I'd like to expand my search to include vintage DE razors. I found LOTS of resources on what to look for in a straight but not so much on DE.
Anyone have any suggestions as to what to look for?
Are you looking for shaving or collecting selling purposes?
I go around to antique stores and find some cheap ones and restore them. just make sure that they aren't broken. the good thing is it is just what you like and how they feel in the hand when shaving heck i bought a Gillette for 5 bux at an antique store and it is the best feeling DE that i own hope this helps some
Shaving first.Quote:
Originally Posted by ryanjewell
Collecting second.
Basics for collecting: no plate loss, no bent teeth (open comb), know what the ballpark of what things go for so you don't spend $75 on a superspeed (eBay is a good indicator of what the market will bare)
For what is what...this is a good place to start: http://www.mr-razor.com/
As far as for shaving, give them all a try...everyone's face is different and every razor works differently with different blades.
In some respects it's no different than buying vintage straights. You can look for a pristine one and pay big bucks or buy one needing a little attention for a more modest amount or buy one needing major restoration real cheap. The only difference with a DE (to me) is making sure the thing is mechanically intact because that can be very difficult to repair depending on the razor. You can always replate.
NOS, is obviously the holy grail in vintage... cased and near mint would be net ( be careful, because antique stores and ebayers wills ell razors in the wrong case...) For use... mechanically sound is what you want. a little plate loss is generally not an issue.
In terms of vintage Gilettes....
1940s superspeeds and techs are mild, 1950s superspeeds are medium (blue a bit milder and red a bit more aggressive, most open combs tend to be more aggressive. Adjustibles obviously go from very mild to fairly aggressive, and while there are differences, they are all *fairly* similar to each other.
obviously there are SE razors, injector razors, other brands, modern razors, and even plenty of less common Gillettes, as well not listed, but that'll at least get you started somewhat. Keep in mind that even an aggressive DE isn't that big a deal to some one with some experience with straights or SE razors.
Hope that helps!
Thanks to everyone for the help. I'm off treasure hunting tomorrow and will post any finds.
One thing to look for is to make sure the parts that should move move and the ones that shouldn't don't. My first DE, which I still own and use and like, had a small hairline crack in the handle, which eventually made the head loosen and fall off. I didn't know that the handle was supposed to be firmly affixed to the head, so I bought it. Overall not a big deal, I fixed it with some glue, but had I noticed it in the first place, I probably would have shopped around a bit more.
Moorefield,
In addition to the information from these gentlemen, hold the razor in your hand and see how it feels. How is the balance, the size, the handle's length, and so on. Those are important, too. Antique stores are also notorious for passing junk as "antique" and, therefore, excusable. Be careful with that. One antique store owner's antique is a shaver's junk.
The most IMPORTANT thing is to share the photos of what you bought with us!! ;)
Fresh from the picking.Quote:
Originally Posted by carlmaloschneider
Not a bad haul for a few hours work.
I still had no idea what to look for in the DE department. One store I stopped at had about ten Gillette razors I couldn't really tell the difference between them other than some sort of reference number on the back of the head. Anyone know where I can find more info on these numbers before I go back?
well, just regarding the DE it looks like a decent fat handled tech (pic is a little blurry, so i can't tell on condition too much) which is a decent shaver. the numbers on the bottom are just date codes. if it was all the same razor with just different date codes, it probably won't make too much difference. really, knowing the MODEL of the razor will be more helpful (superspeed, flaretip, fatboy, slim, super adjustable, tech etc...).Quote:
Originally Posted by Moorefield1
After a quick cleaning.
Gillette Canadian made, 1932.
This one came home with me simply because I am Canadian and it was very inexpensive.
Fat handled tech razors have a good rep. I haven't used one, myself, because I find them a bit too mild for my tastes, but you should get great shaves from yours.
Thanks for the info. As a first Safety razor mild may not be a bad thing. Glad to hear I may have a good fit.Quote:
Originally Posted by Sargon
That's nice, I like it...Quote:
Originally Posted by Moorefield1