Page 1 of 2 12 LastLast
Results 1 to 10 of 20
Like Tree13Likes

Thread: Gillette Fatboy Cleaning - Plating Project

  1. #1
    Senior Member
    Join Date
    Jun 2011
    Posts
    222
    Thanked: 30

    Default Gillette Fatboy Cleaning - Plating Project

    So I now have three Fatboy razors. This one here is my most recent pickup - thank you flea market guy for the awesome deal $2.00 !!!!!

    With the price being so low on this one & the amount of plating that is missing - I decided to disassemble the razor to clean it properly and get a new plating finish on it also. The plating will be nickel just as the factory finish. If the results are satisfactory then I may consider a new plating job on my Gold Executive Fatboy - I am unsure because of pricing on 24K gold plating.

    The disassembly was actually quite easy. I watched the video on YouTube and read the guide a few times. Ten minutes later it looked like this (both springs are not shown, but are safely in a baggy) - More pictures after it comes home from plating.



    Name:  Picture 002.jpg
Views: 9463
Size:  28.3 KB
    Attached Images Attached Images  

  2. #2
    Senior Member
    Join Date
    Sep 2010
    Posts
    2,169
    Thanked: 220

    Default

    I'm amazed that you found a place that does nickel plating, I have a Victorian stove that I want to get done but can't find a place to do it! Probably pricey also. What do you plan on cleaning it with? I used CLR once on a DE & it worked excellent.

  3. #3
    Senior Member
    Join Date
    Jun 2011
    Posts
    222
    Thanked: 30

    Default

    I have a family friend that owns a plating company. He would also be the person that would do the gold plating. I am still unsure of the costs, but I know that the nickel will be fairly cheap (especially compared to the gold plating).

    To clean the razor I boiled the pieces in baking soda and alcohol and water. There was little crud build up so this razor was either taken care of or used very little. The plating could have been removed when cleaning it, being rolled around a bunch of other stuff, or anything that fits the category of not caring for it properly.

    Once at the plating shop, its it stripped completely down to the bare metal. Then comes the new finish sometime today or tomorrow. Unless I pay for shipping, I wont be able to pick up the razor before Saturday. I live four miles away,and I am not in a rush to get it back - so I will get some pics over the weekend.

  4. #4
    Senior Member
    Join Date
    Sep 2010
    Posts
    2,169
    Thanked: 220

    Default

    Quote Originally Posted by jumbojohnny View Post
    I have a family friend that owns a plating company. He would also be the person that would do the gold plating. I am still unsure of the costs, but I know that the nickel will be fairly cheap (especially compared to the gold plating).

    To clean the razor I boiled the pieces in baking soda and alcohol and water. There was little crud build up so this razor was either taken care of or used very little. The plating could have been removed when cleaning it, being rolled around a bunch of other stuff, or anything that fits the category of not caring for it properly.

    Once at the plating shop, its it stripped completely down to the bare metal. Then comes the new finish sometime today or tomorrow. Unless I pay for shipping, I wont be able to pick up the razor before Saturday. I live four miles away,and I am not in a rush to get it back - so I will get some pics over the weekend.
    It pays to know people! I'm looking forward to the pics of the finished razor.

  5. #5
    face scraper bondpunk's Avatar
    Join Date
    May 2011
    Location
    west virginia
    Posts
    352
    Thanked: 62

    Default

    I have been wanting to take apart my slim for awhile, but it is still in decent shape. Hope it turns out how you want

  6. #6
    < Banned User >
    Join Date
    Feb 2011
    Posts
    1,256
    Thanked: 194

    Default

    I completly destroyed a perfect fatboy because of that video on youtube. It is not beginner friendly at all and the tools that were reccomended for the jobs were destructive. I was young and dumb and have never forgivin myself for watching that video and wrecking my razor. It was not beginner friendly at all. I am very glad to see your's worked out for you though. I just hope the video doesn't encourage more like me and end up causing a destruction. I would love to see it repllated though I have heard razor emporium does a heck of a job

  7. #7
    Senior Member
    Join Date
    Jun 2011
    Posts
    222
    Thanked: 30

    Default

    Sorry to hear about that misfortune. Were you the one that posted on the comments for the video? I read that after I had already dismantled my razor, but reading the comment made me nervous (what if I got lucky with this one - not lucky with one of the others?). I didnt use the video as a how to, I used it to see the disassembly in action. There is a link to a step by step guide to break down the razor - thats what I went by.

    It all worked perfectly fine for me. Damaging those threads could have been because one of two things-

    1) The tool you used to hammer out the collar was too thin and therefore would have gone into the collar rather than sit on the base of it evenly. I used an old wooden dowl that fit perfectly inside the shaft and it came out with no problem. Even better than a dowl, is the handle to another old Gillette (not an adjustable though).

    2) You need to press down the setting spring and turn the ring as far apart as possible. The dial should end up resting just to the left of the #9 yet still be between #1 & #9. That will lift threads as high as possible, making it much harder to come into contact with threading.

    All the same I am curious about which specific piece was damaged. Could you identify it by using one fo my pictures? I have a few spare parts...maybe I have one that can save your Fatty.

  8. #8
    < Banned User >
    Join Date
    Feb 2011
    Posts
    1,256
    Thanked: 194

    Default

    yeah I was the one that posted the comments and now that I think about it they were very rude. he only put the video up as a guide and it was not his fault I screwed it up. I dont have the fatboy anymore so thanks for the offer though

  9. #9
    Senior Member
    Join Date
    May 2010
    Posts
    109
    Thanked: 24

    Default

    Update please...

  10. #10
    Senior Member
    Join Date
    Jun 2011
    Posts
    222
    Thanked: 30

    Default

    I picked up the razor a couple weeks ago and I have the bag of parts sitting at home, I just need to assemble the razor. I havent had much time to work on the hobby stuff lately. Work is getting into the busy time of year and with the gym added in, I just dont have the energy to do anything past 10PM.

    The first couple plating attempts left some questionable spots on the center sleeve, but that has been resolved. My buddy wanted to attempt some reverse engineering and he is currently working on making his own Fatboy. It sure must be nice to have a fully equiped shop at your disposal. I gave him a cleaned up straight for his services - now I think he has RAD because he wont stop talking about razors.

    I will try to get the razor reassmbled some time this week. I have a friend that is a photographer and she has agreed to take quality photos for me (in exchange for my services of repairing her original Nintendo). Stay tuned, there will be some eye candy coming soon.
    Razorburn and TwistedOak like this.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •