Page 1 of 2 12 LastLast
Results 1 to 10 of 11
Like Tree25Likes

Thread: 50 Shaves In

  1. #1
    Senior Member
    Join Date
    Oct 2017
    Location
    USA
    Posts
    464
    Thanked: 31

    Default 50 Shaves In

    I’m about 50 shaves in with a straight razor, finally taking the plunge after 45 years of traditional wet shaving with brush, soap, and DE razors. I’ve avoided asking the usual newbie questions that have been asked over and over, but took the answers I found here and applied them.

    I have a few observations that those of you who have been shaving for a long time with a straight will probably think to be obvious, but I post them with the hope that they might be helpful to those just starting.

    Most issues are from my technique, not the razor.

    Assuming the razor is properly honed by someone who knows what they’re doing, and stropped properly, any issues about the razor ‘sticking’ or other issues stem from my technique, not the razor. The first one, which I discovered early on is I was making a lather which worked well for DEs, somewhat too thick, and not sufficiently hydrated for a straight razor shave. And the second is something I should know something about…

    Pressure and angle

    Yes, I know it’s 101. In 45 years of traditional wet shaving with a brush, soap, and DE, I’ve helped several of my friends get into traditional wet shaving with a DE. The thing I emphasize to them is a light pressure and maintaining a proper angle. I had to laugh at myself when I discovered the reason my face felt a bit ‘raw’ after a couple of shaves with the straights. I discovered that my pressure was a bit too heavy and my angle a bit too steep. Had to laugh.

    A good razor helps

    I started with typical ‘beginner’s’ razors. A Ralph Aust 5/8 from Lynn, and a Livi Grifetto. They were good choices on which to learn the basics. After about a month, I worked up the courage to reach out to Max Sprecher, and I’m fortunate that I was able to get a few of his masterpieces.

    The first time I was able to achieve a comfortable 3-pass shave was with an 8/8 Max Sprecher Spanish Point. Not a ‘beginner’s’ razor, I know, but I had absolutely no problem with it. In fact, the first time I completed a three-pass straight razor shave, and the first near-BBS shave with a straight was with his razors. I know there are other great razors out there, and I’ve only stuck my toe into the vintage world, but his razors have me spoiled. The Robert Williams I was able to get, and the Butch Harner/ggsixgun collaboration are wonderful razors and have given me really good shaves. But the shaves I get with Max’s razors are unsurpassed.

    I can get away with a drier, ‘fluffier’ lather with a DE.

    More care is required with a straight, to make sure the lather is properly hydrated so that the glide helps in the shave. I’ve got a ton of ‘artisanal’ soaps that work great with the DE, including a few that are heavy tallow soaps. I have to hydrate the heck out of them to have them work well with the straight razor. I much prefer my beloved Italian soaps, especially SMN, XPEC, SV, and Nuàvia. And I’ve rediscovered Tabac.

    On fear and going slowly

    I used to be too scared even to watch a straight razor video. It just looked so dangerous. I’ve been shaving with Feather blades, both DE and SE, almost exclusively since they were released to the American market, so a few years ago I figured, well, a Feather DX shavette and an AC blade would be a good ‘introduction’ to straight razor shaving. Wrong. Nicks, weepers, and small cuts put me off. I so wish I had started with a good straight.

    I took Lynn’s advice from his videos to go slowly, and Obie has been so helpful, as have the posts and wikis here, and after a little while the fear went away. Shave after shave, the ‘fluency’ with the razor increased little by little. I’m nowhere near competent yet, but I can get a really good, near BBS shave with the straight and a little touchup with a DE. At the beginning, it was a partial pass with a straight, and the rest of the shave with a DE, now it’s 2 1/2 passes with the straight, and some minor touchup with the DE. I’m in no rush.

    One thing I have to avoid is comparing my beginning straight razor shaves to the really good DE shaves I have been getting almost effortlessly for years. It’s been so long ago that I learned to shave with a DE, but I know there was a learning curve, and my shaves were not optimal. Why should this be different? Patience is indeed a virtue.

    And despite the fear factor, I’ve yet to draw blood, save for a tiny nick on my 2nd shave.

    I like the whole process

    Stropping, in particular, is very cool.

    This community is a wonderful resource

    I have learned so much from the posts, the wikis, the sharing on this community, and I want to express my sincere gratitude again.

    Thanks for listening, and for all your help and support.
    Michael P

  2. #2
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Quote Originally Posted by MichaelPz View Post

    A good razor helps

    I started with typical ‘beginner’s’ razors. A Ralph Aust 5/8 from Lynn, and a Livi Grifetto. They were good choices on which to learn the basics. After about a month, I worked up the courage to reach out to Max Sprecher, and I’m fortunate that I was able to get a few of his masterpieces.

    The first time I was able to achieve a comfortable 3-pass shave was with an 8/8 Max Sprecher Spanish Point. Not a ‘beginner’s’ razor, I know, but I had absolutely no problem with it. In fact, the first time I completed a three-pass straight razor shave, and the first near-BBS shave with a straight was with his razors. I know there are other great razors out there, and I’ve only stuck my toe into the vintage world, but his razors have me spoiled. The Robert Williams I was able to get, and the Butch Harner/ggsixgun collaboration are wonderful razors and have given me really good shaves. But the shaves I get with Max’s razors are unsurpassed.
    I really enjoyed your post and especially the fact that you were able to find most of the info you needed without the need to ask questions that have been asked over and over again by beginners.

    I am going to preface my next comment by saying that I have never used a custom razor. My definition of a good razor, regardless of cost, is one that will take and hold a shave ready edge. That is possible to get with either a low cost beginners razor or a custom razor, I would presume. In my experience I have been able to get near identically good shaves with razors ranging from a 200 year old stubby to a modern TI or Revisor. I hone all my own razors on the same set of Naniwa hones for them all. A good razor, as per my previous definition, is usually the result of the person honing it. I don't like to see beginners get the impression that they have to spend large amounts to get excellent shaves from a straight razor. All this is not a slag on custom razors or the artisans that craft those wonderful straight razors.

    Bob
    Life is a terminal illness in the end

  3. The Following User Says Thank You to BobH For This Useful Post:

    MichaelPz (12-01-2017)

  4. #3
    Moderator rolodave's Avatar
    Join Date
    Aug 2011
    Location
    Racine, WI USA
    Posts
    7,530
    Thanked: 1927
    Blog Entries
    1

    Default

    Good post!

    BobH is correct. Poor honing will make the most expensive razor worthless.
    It has to be properly honed.
    If you don't care where you are, you are not lost.

  5. The Following User Says Thank You to rolodave For This Useful Post:

    MichaelPz (12-01-2017)

  6. #4
    Senior Member Porl's Avatar
    Join Date
    Aug 2016
    Posts
    688
    Thanked: 123

    Default

    A very interesting read. Thank you for sharing your experiences.
    Fact: Opinions are not the same as facts... Well, that's my opinion anyway

  7. The Following User Says Thank You to Porl For This Useful Post:

    MichaelPz (12-01-2017)

  8. #5
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    Good for you, your coming along great. I will add to Bobs comment, got to be careful with remarks that might lead a new guy just starting to think he needs a custom to get a great shave. I,m one of the guys that have almost all my razors are custom, I just like the aesthetics, but they won't shave any better than a 5$ razor that has good steel. Including my Max Sprecher. The best razor I have s a vintage Kinfolks that cost 20$ and it was almost mint, but will take an edge. All things being equal. Every blade you have will take the same edge, if you do your job. Like you say it's technique most of the time. Stay with it and enjoy. Tc
    BobH and markbignosekelly like this.
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  9. #6
    Senior Member MrHouston's Avatar
    Join Date
    Aug 2017
    Location
    Texas
    Posts
    274
    Thanked: 70

    Default

    I'm 4 months into SR shaving and also came from DEs. So, I am closing in on my 100 shaves and feel like I can now shave with some confidence.

    I think the journey would have been better if I'd stuck to 1 well honed razor, but that's just not how I operate. I've used a number of different razors and am beginning to get capable of honing my own.

    Good observations above. I am also going back through my soaps to see which work better for straights.

  10. #7
    Senior Member
    Join Date
    Oct 2017
    Location
    USA
    Posts
    464
    Thanked: 31

    Default

    Thanks for the kind and useful comments.

    A good razor, as per my previous definition, is usually the result of the person honing it. I don't like to see beginners get the impression that they have to spend large amounts to get excellent shaves from a straight razor.
    Bob, thank you for this-I didn't mean to give the impression that one had to have a super-deluxe custom razor to get a good shave.

    I know from many years of DE shaving that I can pick up a vintage Gillette or Hoffritz and with a fresh Feather blade get a wonderful shave. Still, I reach for a BBS-1, Tradere, or other well-crafted razors often because of the aesthetics, the craftsmanship, the feel. I'm sure it's the same with straight razor shaving.

    After some more shaves, I want to learn how to hone properly. I'll still send my customs to a pro, but I think learning to hone will bring a new level of understanding and enjoyment.

    Thanks very much!
    BobH likes this.
    Michael P

  11. #8
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Quote Originally Posted by MichaelPz View Post
    Thanks for the kind and useful comments.



    Bob, thank you for this-I didn't mean to give the impression that one had to have a super-deluxe custom razor to get a good shave.

    I know from many years of DE shaving that I can pick up a vintage Gillette or Hoffritz and with a fresh Feather blade get a wonderful shave. Still, I reach for a BBS-1, Tradere, or other well-crafted razors often because of the aesthetics, the craftsmanship, the feel. I'm sure it's the same with straight razor shaving.

    After some more shaves, I want to learn how to hone properly. I'll still send my customs to a pro, but I think learning to hone will bring a new level of understanding and enjoyment.

    Thanks very much!
    Yes, I can understand the enjoyment that using well crafted gear can bring, no doubt about that.

    Yes, I am sure learning to hone will bring you a new level of understanding and enjoyment. That and some amount of frustration along the way too. Good luck with that.

    Bob
    MichaelPz likes this.
    Life is a terminal illness in the end

  12. The Following User Says Thank You to BobH For This Useful Post:

    MichaelPz (12-01-2017)

  13. #9
    JP5
    JP5 is offline
    Senior Member blabbermouth JP5's Avatar
    Join Date
    Feb 2015
    Location
    Duluth, GA - Atlanta OTP North
    Posts
    2,546
    Thanked: 315
    Blog Entries
    1

    Default

    Nice post. My biggest problem is not trying harder to implement the advice/suggestions I've read. Sometimes we know we aren't doing something right, but don't take enough time to correct it.
    Do I shave better than a SR than I did when I first started? Yes.
    Am I happy with the shave I currently get? Noooo
    MichaelPz likes this.

  14. #10
    Junior Member
    Join Date
    Nov 2017
    Location
    Southern Tier of New York
    Posts
    14
    Thanked: 2

    Default

    This gives me some helpful insight to my first few months I hope. It's nice to see the point of view of someone who isn't quite a seasoned veteran but has some good shaves under his belt.
    MichaelPz likes this.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •