Results 1 to 9 of 9
Like Tree35Likes
  • 13 Post By ScoutHikerDad
  • 5 Post By CrescentCityRazors
  • 3 Post By 5G62
  • 5 Post By DZEC
  • 4 Post By outback
  • 1 Post By CrescentCityRazors
  • 1 Post By Wayne1963
  • 1 Post By JoeBass
  • 2 Post By sharptonn

Thread: 1st Pass a No-Go? Try This

  1. #1
    Senior Member blabbermouth ScoutHikerDad's Avatar
    Join Date
    May 2010
    Location
    Upstate South Carolina
    Posts
    3,308
    Thanked: 987

    Default 1st Pass a No-Go? Try This

    So once in awhile I'll lather up to start a shave with known great edges, and this happens: the blade just skips, catches, and doesn't want to cut-not good. I've had this happen a few times over the years, often with MWF but occasionally other soaps, that I think when newbies complain about a poor shave, this may sometimes be the culprit (assuming they've got a properly-honed and stropped edge-not always a safe assumption). This evening I bloomed my dedicated MWF mug with hot water about an hour ahead of time, got a huge cloud of wet lather (or so I thought) with my soap-hog brush, and applied it to a wet face, dipping the tips a few times as I face-lathered this known water-hog soap-good to go, right?

    Not so fast-2 of my best shavers, a nice WB I won in the Giveaway and honed by Outback Mike, and one of my own Boker Hollow Grounds, both got majorly hung up. What the?!

    Then I remembered what I have done before when this happened: rinse off most of the lather with as hot a water as I can stand, and re-apply, taking care to get it extra wet. I then tried the same blades, one for each side on all three passes-ahhhh, bliss. That MWF is as slick as any other if you work with it a bit. It seems that this water-hog soap (and come to think of it, I've had the same thing occur a couple times with Proraso, also a known water-hog) just needed another, wetter lather to allow my best blades to get their respective glides on.

    So if you're relatively new, and you start off with a blade just not shaving, try this fix and see what happens. I'm betting some of you veterans have experienced this. Just my 2 cents.
    There are many roads to sharp.

  2. The Following 2 Users Say Thank You to ScoutHikerDad For This Useful Post:

    planeden (01-04-2021), RezDog (01-06-2021)

  3. #2
    Home of the Mysterious Symbol CrescentCityRazors's Avatar
    Join Date
    Dec 2019
    Location
    New Orleans LA
    Posts
    798
    Thanked: 112

    Default

    Quote Originally Posted by ScoutHikerDad View Post
    So once in awhile I'll lather up to start a shave with known great edges, and this happens: the blade just skips, catches, and doesn't want to cut-not good. I've had this happen a few times over the years, often with MWF but occasionally other soaps, that I think when newbies complain about a poor shave, this may sometimes be the culprit (assuming they've got a properly-honed and stropped edge-not always a safe assumption). This evening I bloomed my dedicated MWF mug with hot water about an hour ahead of time, got a huge cloud of wet lather (or so I thought) with my soap-hog brush, and applied it to a wet face, dipping the tips a few times as I face-lathered this known water-hog soap-good to go, right?

    Not so fast-2 of my best shavers, a nice WB I won in the Giveaway and honed by Outback Mike, and one of my own Boker Hollow Grounds, both got majorly hung up. What the?!

    Then I remembered what I have done before when this happened: rinse off most of the lather with as hot a water as I can stand, and re-apply, taking care to get it extra wet. I then tried the same blades, one for each side on all three passes-ahhhh, bliss. That MWF is as slick as any other if you work with it a bit. It seems that this water-hog soap (and come to think of it, I've had the same thing occur a couple times with Proraso, also a known water-hog) just needed another, wetter lather to allow my best blades to get their respective glides on.

    So if you're relatively new, and you start off with a blade just not shaving, try this fix and see what happens. I'm betting some of you veterans have experienced this. Just my 2 cents.
    Indeed. A good lather is key and often underrated and misunderstood. Should almost but not quite drip off the face. Even a laser sharp razor will shave much nicer when you have a slippery lather and you have your angle, stretching, and pressure optimized.

  4. #3
    Senior Member
    Join Date
    Feb 2017
    Location
    Savannah, Georgia (nearby anyway)
    Posts
    163
    Thanked: 17

    Default

    I not too long ago discovered the difference that lather can make - both in a quality soap and in improved application.

  5. #4
    Senior Member blabbermouth
    Join Date
    Feb 2018
    Location
    Niagara, Ontario, Canada
    Posts
    2,767
    Thanked: 550

    Default

    I apply the lather and then find some other things to do - brush my teeth, etc. - before starting to shave. Leaving the lather on for a while helps hydrate the beard and lubricate the skin.

    It is hard to resist the temptation to just start shaving as soon as the white stuff goes on your face. Treat shaving as an enjoyable ritual, kind of like meditation. The act of shaving should be enjoyed and not be rushed.
    David
    “Shared sorrow is lessened, shared joy is increased”
    ― Spider Robinson, Callahan's Crosstime Saloon

  6. #5
    Senior Member blabbermouth outback's Avatar
    Join Date
    Mar 2015
    Location
    Akron, Ohio
    Posts
    11,925
    Thanked: 4300

    Default

    I like to do my stropping, after I lather up. That's usually enough time for the suds to work in, for me.

  7. #6
    Home of the Mysterious Symbol CrescentCityRazors's Avatar
    Join Date
    Dec 2019
    Location
    New Orleans LA
    Posts
    798
    Thanked: 112

    Default

    Quote Originally Posted by outback View Post
    I like to do my stropping, after I lather up. That's usually enough time for the suds to work in, for me.
    That's what I do, too. I can't brush my teeth with lather on my face. I always get some in my mouth. Bleagh.

  8. #7
    Senior Member Wayne1963's Avatar
    Join Date
    Feb 2013
    Location
    South Carolina, USA
    Posts
    1,181
    Thanked: 162

    Default

    I like to use a fine mist spray bottle to put water on my face. I do this before the lather goes on, and if need be after too. For clean ups, I usually only use water. Just have to make sure there is enough residual slickness to allow only using water.
    ScoutHikerDad likes this.

  9. #8
    Member JoeBass's Avatar
    Join Date
    Jun 2011
    Posts
    76
    Thanked: 14

    Default

    Might also want to try a pre-shave. I find it really makes a difference with how well my shaves go.
    ScoutHikerDad likes this.

  10. The Following User Says Thank You to JoeBass For This Useful Post:

    ScoutHikerDad (01-13-2021)

  11. #9
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    25,828
    Thanked: 8588

    Default

    I like to do vitamin E oil on my face the night before when I can remember to!
    Makes the hairs surrender the next day.
    2 hot water towels over lather. Soften that beard!
    Great shaves..
    ScoutHikerDad and JoeBass like this.

  12. The Following 2 Users Say Thank You to sharptonn For This Useful Post:

    JP5 (01-18-2021), ScoutHikerDad (01-14-2021)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •