Page 1 of 4 1234 LastLast
Results 1 to 10 of 37
Like Tree131Likes

Thread: preferred blades for shaving.

  1. #1
    Senior Member Audels1's Avatar
    Join Date
    Mar 2021
    Location
    Cranston, RI
    Posts
    336
    Thanked: 7

    Default preferred blades for shaving.

    It seams hard to believe that it was only April when I had my first shave.
    It was on a Modern steel Dovo Bismark Honed by Outback. (Thanks again Mike.)
    since then I have collected 14 razors that I consider shave ready. and have another 25 or so at different stages of the resto process. I know compared to most of you that is a drop in the bucket.

    But on to something I have learned and the reason for this post.

    With different blade types and grinds at my disposal I have found that I really enjoy Sheffield razors with a heavy grind over the full hollows. I find the full hollows to be a very uncomfortable shave. and the Dovo Bismark the worst by far But I have a vintage Hollow that was also honed by Outback and it is miles better than the Dovo

    If I could offer any advice to Beginning wet shavers it would be don't give up if you don't like you're first shaver Try something different you just may find the one that does it for you. And absolutely start with a vintage blade.

  2. #2
    Senior Member blabbermouth tcrideshd's Avatar
    Join Date
    Oct 2013
    Location
    Oakland Tn
    Posts
    6,586
    Thanked: 1894

    Default

    Like most when new, it’s preference only on grinds, if your not getting a good shave with full hollows it’s you, or your edge, which can be you also. The tool is only as good as the hand holding it
    onimaru55, Slur, BobH and 6 others like this.
    “ I,m getting the impression that everyone thinks I have TIME to fix their bikes”

  3. #3
    Skeptical Member Gasman's Avatar
    Join Date
    Nov 2016
    Location
    Colorado Springs
    Posts
    10,473
    Thanked: 2182

    Default

    To this day i enjoy a hollow grind. Very hollow to half. I dont like the cleavers that some others enjoy for shaving. As TC said, its all choice as long as the edge is right.
    It's just Sharpening, right?
    Jerry...

  4. #4
    Senior Member Johntoad57's Avatar
    Join Date
    Feb 2016
    Location
    San Antonio, TX
    Posts
    1,701
    Thanked: 406

    Default

    Quote Originally Posted by tcrideshd View Post
    Like most when new, it’s preference only on grinds, if your not getting a good shave with full hollows it’s you, or your edge, which can be you also. The tool is only as good as the hand holding it
    Exactly to the point!
    Semper Fi !

    John

  5. #5
    Senior Member Audels1's Avatar
    Join Date
    Mar 2021
    Location
    Cranston, RI
    Posts
    336
    Thanked: 7

    Default

    I was not trying to say that heavy grinds are better than full hollows just that so far Sheffield's with a heaver grind are becoming my preference and that someone just starting that is really not liking the shave might want to try something different to what thy are already using before giving up.

  6. #6
    Senior Member
    Join Date
    Jul 2020
    Posts
    270
    Thanked: 44

    Default

    Quote Originally Posted by Audels1 View Post
    I was not trying to say that heavy grinds are better than full hollows just that so far Sheffield's with a heaver grind are becoming my preference and that someone just starting that is really not liking the shave might want to try something different to what thy are already using before giving up.
    I started with a 5/8 Dovo Best Quality full hollow, I didn't know anything about the different grinds back then. I have a mix of grinds now, I like the silence of the wedges and have a fondness for those small, American wedges like the Spike, usually fairly narrow and very nimble but I still shave most of the time with my Dovo out of familiarity. I don't think grind really makes too much of a difference to the shave unless you have something really thin and flexy razor where technique needs to be solid, just pick something that feels right at the time.
    Last edited by thp001; 08-12-2021 at 10:17 PM.
    BobH, outback and Audels1 like this.

  7. #7
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Quote Originally Posted by thp001 View Post
    I don't think grind really makes too much of a difference to the shave unless you have something really thin and flexy razor where technique needs to be solid, just pick something that feels right at the time.
    I think this is why beginners sometimes find full hollow blades give them poor shaves, their technique is not refined enough. Again as TC said, that is assuming all blades are shave ready.

    Bob
    Life is a terminal illness in the end

  8. #8
    Senior Member
    Join Date
    Jul 2020
    Posts
    270
    Thanked: 44

    Default

    Quote Originally Posted by BobH View Post
    I think this is why beginners sometimes find full hollow blades give them poor shaves, their technique is not refined enough. Again as TC said, that is assuming all blades are shave ready.

    Bob
    Yeah I remember my first shave with the Dovo and it was horrendous, lots of nicks, major irritation. The thing is I knew it was going to be like that and I wanted to learn the skills enough that I persisted. I think many people today expect these instant results, they hear about how close and comfortable a shave with a straight can be but don't realize just how much technique is needed. The first shave goes poorly and they need an explanation, blame the tools, razor isn't "shave ready", not the right grind, soap wasn't slick enough, etc. Not that those things can't be an issue but I've shaved off edges way worse than any factory razor, used common bar soap to lather with and it's amazing what you can do once you have technique. I'm still learning even now every single day. Had a bad shave today in fact, lather was way too foamy and was dissipating rapidly, couldn't be bothered to go and do it again so I shaved, got some nicks around my mouth and chin, home alone moment when the Old Spice hit, all part of the fun.

  9. #9
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    Yes, for a beginner to straight razor shaving technique is king always assuming a shave ready razor is used. Good technique comes with time and 3 months of shaving every day being considered to be normal to achieve that. During that time the cause of any trouble with getting a good shave result is likely staring back at you from the mirror. You literally can't buy a better shave by spending on more gear as you don't have a good enough technique yet.

    Bob
    Life is a terminal illness in the end

  10. #10
    Senior Member Slur's Avatar
    Join Date
    Nov 2010
    Location
    Athens
    Posts
    898
    Thanked: 118

    Default

    I also prefer half hollow razors, but I shave perfectly with full hollows as well.

    When you start honing your razors by yourself, you will appreciate full hollows better.

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •