Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25
Like Tree44Likes

Thread: Vintage Vs modern straight razors

  1. #11
    Senior Member blabbermouth PaulFLUS's Avatar
    Join Date
    Dec 2018
    Location
    Gainesville, FL
    Posts
    5,870
    Thanked: 594

    Default

    Quote Originally Posted by thebigspendur View Post
    In our modern times folks accept poor products as the norm and few complain. Back in the day that was not the case. If you bought a razor and there was a problem you got a new one or your money back in an instant no questions asked. Back then people didn't accept shoddy goods like now. Sure some sold junk but those were fly by night salesmen and outfits and if they were caught, well...

    There were inexpensive things made back in the day but still they were well made and didn't fall apart soon after purchase like now. Things these days are engineered to last only so long so you have to come back and keep buying them. Think major appliances. Even common items lasted indefinitely.
    That's not even a little bit true. Take cars for instance. I work on cars and I hear people say all the time, "They just don't build cars like they used to." That's true and it's a good thing because they are a lot better now than they were. As recently as 40-50 years ago once a car hit 100k miles it was time for a major overhaul or the junk yard. These days they're not even broken in well at 100k. Appliances are the same way. Most will last forever if you maintain them. The difference is that the global economy has changed the landscape and made products more accessible to the masses. Our consumer culture is a product and the catalyst. Henry Ford was the founder of the idea that his employees should be able to afford the products they made. Before that most laborers lived in abject poverty. Poverty we can't even imagine today in developed countries. I read somewhere about an industry observer from this side of the pond who toured Wade & Butcher's facilities and was shocked at the squalored conditions. I did a job in the same complex as the food stamp office and there was a table out front signing people up to receive on the doal the "basic necessities," you know: cell phones, cable TV, internet. Things that no one should have to live without. Things that people all over the undeveloped and underdeveloped world consider luxuries. Now, we could argue all day about whether this sense of entitlement is right or wrong and that is not really my point. My point is that our expectations have changed. People years ago patched up things and limped by with them because replacement was not an economical possibly. Those same people today throw out reparable appliances for the same reason. The accessibility of products has made it cheaper to replace than repair. We could repair many things today we discard but the repair businesses can't stay afloat because people won't pay the cost. Couple that with the fact with that the same worker who in Henry Ford's day lived without air conditioning and phone and some without running water, indoor plumbing and electricity now feel as though they should share the same creature comforts that Mr. Ford himself enjoyed. I don't contend that anyone who is willing to tow his own load should live in squalor but that is a separate point. The point I am making is that the throw away mentality is not because products are poorer now. It is because of our global economy...yada, yada, yada. Surely you don't think that the "coal miner's daughter," ilk of poor people had higher quality products than today's so called poor living in air conditioned, electric equipped, indoor plumbed, internet accessible homes.

    Sentimentality blinds us sometimes to the realities of life and also we tend to have selective memory. The fact is that, if we are honest, for the most part the "good ol' days" sucked or at least were much harder on a basic level. Our perception just changes. Proof of point is this: what happens if you leave the house without your cell phone? We panic. Well, what did we do before there were cell phones?
    Last edited by PaulFLUS; 03-19-2023 at 10:46 AM.
    Iron by iron is sharpened, And a man sharpens the face of his friend. PR 27:17

  2. #12
    Member
    Join Date
    Mar 2023
    Location
    Victoria, Canada
    Posts
    69
    Thanked: 0

    Default

    Quote Originally Posted by PaulFLUS View Post
    That's not even a little bit true. Take cars for instance. I work on cars and I hear people say all the time, "They just don't build cars like they used to." That's true and it's a good thing because they are a lot better now than they were. As recently as 40-50 years ago once a car hit 100k miles it was time for a major overhaul or the junk yard. These days they're not even broken in well at 100k. Appliances are the same way. Most will last forever if you maintain them. The difference is that the global economy has changed the landscape and made products more accessible to the masses. Our consumer culture is a product and the catalyst. Henry Ford was the founder of the idea that his employees should be able to afford the products they made. Before that most laborers lived in abject poverty. Poverty we can't even imagine today in developed countries. I read somewhere about an industry observer from this side of the pond who toured Wade & Butcher's facilities and was shocked at the squalored conditions. I did a job in the same complex as the food stamp office and there was a table out front signing people up to receive on the doal the "basic necessities," you know: cell phones, cable TV, internet. Things that no one should have to live without. Things that people all over the undeveloped and underdeveloped world consider luxuries. Now, we could argue all day about whether this sense of entitlement is right or wrong and that is not really my point. My point is that our expectations have changed. People years ago patched up things and limped by with them because replacement was not an economical possibly. Those same people today throw out reparable appliances for the same reason. The accessibility of products has made it cheaper to replace than repair. We could repair many things today we discard but the repair businesses can't stay afloat because people won't pay the cost. Couple that with the fact with that the same worker who in Henry Ford's day lived without air conditioning and phone and some without running water, indoor plumbing and electricity now feel as though they should share the same creature comforts that Mr. Ford himself enjoyed. I don't contend that anyone who is willing to tow his own load should live in squalor but that is a separate point. The point I am making is that the throw away mentality is not because products are poorer now. It is because of our global economy...yada, yada, yada. Surely you don't think that the "coal miner's daughter," ilk of poor people had higher quality products than today's so called poor living in air conditioned, electric equipped, indoor plumbed, internet accessible homes.

    Sentimentality blinds us sometimes to the realities of life and also we tend to have selective memory. The fact is that, if we are honest, for the most part the "good ol' days" sucked or at least were much harder on a basic level. Our perception just changes. Proof of point is this: what happens if you leave the house without your cell phone? We panic. Well, what did we do before there were cell phones?
    Thanks for this really insightful short essay. Lots to think about. You should be writing for publication.

  3. #13
    Razor Vulture sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    25,827
    Thanked: 8588

    Default

    For me, Vintage. Hands-down.

  4. #14
    Senior Member blabbermouth
    Join Date
    Feb 2018
    Location
    Niagara, Ontario, Canada
    Posts
    2,767
    Thanked: 550

    Default

    Quote Originally Posted by sharptonn View Post
    For me, Vintage. Hands-down.
    Me too, especially when you can find a 100- or 200-year old razor that is NOS or can be brought back to almost new condition. A little hone wear or some patina on the blade or some imperfections or wear on the scales are just evidence of quality and use. If it weren’t well made, it would not have survived as long as it has.
    RezDog likes this.
    David
    “Shared sorrow is lessened, shared joy is increased”
    ― Spider Robinson, Callahan's Crosstime Saloon

  5. #15
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,736
    Thanked: 5016
    Blog Entries
    4

    Default

    Don't confuse advances in technology with quality of construction. Sure old cars didn't have the advanced metallurgy they do now or the advanced lubrications and performance tires and you could go down the list. But there is a difference between that and with the fit and finish. Just go into the basement of a 100 year old house and compare same to say a 40 year old house and look at the beams and supports and all that is "missing" in the new ones. Go measure the 2x4s and how they are exact in the older house and a joke in the newer ones.

    I'm old enough to remember when folks bought a major appliance in the 1950s like a stove or refrigerator. The thing never broke. It lasted forever. Maybe the thermostat had to be replaced after 10 years or so and it was an easy cheap repair. People threw out the old because they just wanted a new one with new features or looks. These days if a refrigerator lasts 10 years you are lucky. Taking care of it means little cause most folks aren't going to be moving around a multi hundred pound appliance to get to the back to unscrew parts to vacuum the condensers. Need a new thermostat in your oven now? It means a new control circuit board. It probably around $500 for parts and labor assuming the brand still makes the parts.

    It's true you can repair most any appliance. Of course they are made to be repaired the only minor consideration is repair costs have skyrocketed. Just an example here. I have a Bosch wall oven two part appliance. When it was three years old and hardly used the bottom element shorted and in the process blew a hole in the bottom steel plate. The element was replaced but they (Bosch) refused to replace the plate saying it wasn't a replaceable part. Luckily the repair outfit had my exact unit which was headed for the city dump and they pulled the parts from that. That exercise cost me $1200. Now the top unit went out and I refuse to spend that again to fix it. Yes you can repair it but economically it makes more sense to junk it and buy new. Now maybe you be a really handy guy and can repair anything yourself and have access to used parts cause many outfits won't even sell parts to the end-user period. I find in general appliances major or minor simply don't stand up over the years. Yes you can buy higher end and sometimes they really are better and sometimes they are way worse.

    But back to razors and we have discussed this topic many many times over the years. If you buy a razor now the the chances are it is not shave ready and the edge is in dreadful condition. There are exceptions of course like most custom razors and some places like Koraat. Back in the day that was a rare occurrence because people took pride in their work unlike now. I know many these days simply can't believe that but it is true.
    No matter how many men you kill you can't kill your successor-Emperor Nero

  6. #16
    Senior Member blabbermouth outback's Avatar
    Join Date
    Mar 2015
    Location
    Akron, Ohio
    Posts
    11,924
    Thanked: 4300

    Default

    Designed adolescents.
    Mike

  7. #17
    32t
    32t is offline
    Senior Member blabbermouth 32t's Avatar
    Join Date
    Oct 2010
    Location
    50 miles west of randydance
    Posts
    9,573
    Thanked: 1352

    Default

    Spellcheck? LOL

  8. #18
    Senior Member
    Join Date
    Mar 2014
    Location
    Coimbra (Portugal), Vancouver B.C.
    Posts
    748
    Thanked: 171

    Default

    Quote Originally Posted by RezDog View Post
    Modern razor is a loose term. A modern razor from a reputable maker. It seems like the fit and finish has fallen off, likely due to staffing issues and the skill set of the staff. The steel is still good, and the treatment of the steel is still good. I think a large percentage of the vintage blades, if they were junk, it would be unlikely anyone would have saved them. I have both new and vintage. All of mine shave well. I like to think that I was very selective in what I bought.
    All good points, but one thing to consider are smaller razor makers like Aust, Koraat and some others where the individual making the razor is known, has an established track record and stands behind the product.

    Regarding vintage razors, there is a trap when someone picks-up a “garage find” or “flea market” razor that may have suffered years of abuse and neglect.

    Over the years, I have come across new razors from a (once) well-known “mastro” and some vintage razors that took extraordinary efforts from my side to transform them into what I consider acceptable razors.

    Lesson learnt: neither “new” nor “vintage” are gurantees by themselves, in a way you still “buy the seller”.


    B.
    Last edited by beluga; 03-20-2023 at 04:48 PM. Reason: typo
    RezDog likes this.

  9. #19
    Senior Member blabbermouth PaulFLUS's Avatar
    Join Date
    Dec 2018
    Location
    Gainesville, FL
    Posts
    5,870
    Thanked: 594

    Default

    I could rebutt all of the previous as sentimental hogwash and keep an argument suspended in midair but the fact is I feel no need. We all know that no one will admit they are wrong on the internet. I will just say that my house was built in 1996 and we have all the same appliances that came with the house so there goes your 10 years. We did just replace the AC because the compressor shorted and it was an R22 system which has been phased out for supposedly environmental reasons but the fact is that carrier created a new refrigerant and had legislators on their side. Yes I had to spend $5k on a new system and I would be remiss to say that PLANNED OBSOLESCENCE was not a thing. However by the middle of next year I will have made that back in the savings in my electric bill. Why? Because THEY ARE MADE BETTER TODAY THAN EVER.

    Just because things don't get repaired doesn't mean they can't be repaired and just because they can be repaired doesn't mean they should be repaired. The premise that things are not made as well today based on these anecdotal snippets is just fallacious.

    I take great pride in my work. I see work by others every day also that was quite well done. I think implying that craftsmanship is dead is also not only untrue but insulting.

    As far as razors go, I can say that any of us who have had very many Sheffield blades know that they were as wonky as anything you could expect today. Warped spines, wide and uneven bevels, uneven grinds, cracks hidden inside the blades, all can be often found in many of the Sheffield makers. Why do we throw new makers under the bus but give a pass to vintage makers? Again I think it is largely sentimentalism.
    Last edited by PaulFLUS; 03-20-2023 at 02:20 AM.
    STF likes this.
    Iron by iron is sharpened, And a man sharpens the face of his friend. PR 27:17

  10. #20
    The Hurdy Gurdy Man thebigspendur's Avatar
    Join Date
    May 2005
    Location
    New Mexico
    Posts
    32,736
    Thanked: 5016
    Blog Entries
    4

    Default

    Quote Originally Posted by PaulFLUS View Post
    I could rebutt all of the previous as sentimental hogwash and keep an argument suspended in midair but the fact is I feel no need. We all know that no one will admit they are wrong on the internet. I will just say that my house was built in 1996 and we have all the same appliances that came with the house so there goes your 10 years. We did just replace the AC because the compressor shorted and it was an R22 system which has been phased out for supposedly environmental reasons but the fact is that carrier created a new refrigerant and had legislators on their side. Yes I had to spend $5k on a new system and I would be remiss to say that PLANNED OBSOLESCENCE was not a thing. However by the middle of next year I will have made that back in the savings in my electric bill. Why? Because THEY ARE MADE BETTER TODAY THAN EVER.

    Just because things don't get repaired doesn't mean they can't be repaired and just because they can be repaired doesn't mean they should be repaired. The premise that things are not made as well today based on these anecdotal snippets is just fallacious.

    I take great pride in my work. I see work by others every day also that was quite well done. I think implying that craftsmanship is dead is also not only untrue but insulting.

    As far as razors go, I can say that any of us who have had very many Sheffield blades know that they were as wonky as anything you could expect today. Warped spines, wide and uneven bevels, uneven grinds, cracks hidden inside the blades, all can be often found in many of the Sheffield makers. Why do we throw new makers under the bus but give a pass to vintage makers? Again I think it is largely sentimentalism.
    You must be the luckiest guy in the world. My house was built in 1983 and let's see I'm on my 4th stove and my third dishwasher and my third refrigerator and I've lost count of smaller appliances like toaster ovens. My A/C had to be replaced last summer after 18 years. Repairs would have cost thousands and we would still have the same old unit which could have failed two days later.

    Of course you see all those issues in old Sheffield razors. They are over 100 years old and you have no knowledge as to how they have been abused and developed all those issues you mention.

    Of course there are plenty of small business owners and cottage industry folks who try and do a great job. It's just that they are in the minority.
    No matter how many men you kill you can't kill your successor-Emperor Nero

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •