Like the above posters say, HHT don't mean a thing. It does not correlate with how well the razor shaves. Only shave test can tell you. Some razors are better than others, but most get sharp enough to give you a comfortable shave.
Printable View
Like the above posters say, HHT don't mean a thing. It does not correlate with how well the razor shaves. Only shave test can tell you. Some razors are better than others, but most get sharp enough to give you a comfortable shave.
Definitely there is a difference in hair. I am mostly gray and the gray ones are much harder to cut in the HHT.
I have always had problems with HHT and even testing on arm hair. My leg hair seems to be a lot coarser and gives me the feedback I need and can rely on. Saying that, your razor sounds as though it's as dull as Tabloid news press!! Get it pro honed brother and eliminate all possibilities. Good Luck:tu
Have you ever considered using the Feather straight razor in order to experience one sharp blade? Use the beginners blade so you don't cut yourself too badly. By using this razor use can develop your technique and know what a sharp razor can do. I did and I now use both blades. The other thing you may want to try is first using an old fashion T-handle single edge blade (like the one's your great grandfather used during WWII) in order to tak one pass at your face so as to reduce what appears to be a heavy beard. At this point you can use the straight edge to get a very close shave. Getting a blade factory sharp certainly is no easy task so don't give up. Ok.
Hello, everyone:
I, too, put little trust in HHT. My shave — with proper lather preparation and effective stropping — tells me if my razor needs to be honed.
Regards,
Obie
As others have said, all the tests dont mean anything if the shave isnt good. The way I think of it is, if the shave is good then the edge is good.
If it pulls or doesnt remove hair, then it needs to be honed, assuming shaving technique is not the issue.
- Your razor is hopelessly dull. Have it professionally honed. End of story, problem solved.
- The Hanging Hair Test is not a binary test. It has scalar results. If you use it as binary test, it will be useless. Please take a moment to read this document: Hanging Hair Test, from trick to probing method - Straight Razor Place Wiki
"The HHT has a long history of being dismissed as a «parlor trick», especially by people that experience nice shaves without being able to «pass» the test on the razor. They appear to look at the HHT as a binary «0 or 1» test and, getting «0» as result for edges that do shave, they disregard the whole HHT as being erratic. For putting the HHT into use while honing a razor, the above is a faulty assumption. Just like the other tests, such as the Thumb Nail Test and the Thumb Pad Test, the HHT is a probing test, much more than a True/False-type of test. Like these other tests, one needs to learn how to properly conduct a HHT and one needs to learn how to assess the results.And yes, the ultimate test is the shave test. But the HHT has its merits, and all my razors which were honed using it, and passed "HHT-5 - silent slicer", did shave well afterwards. I have seen this work on a whole number of razors (about 40 of wildly varying widths, grinds and whatnot), and that is all the information I need to make this test useful for me. YMMV, as always.
Before diving into the heart of the matter for turning the «trick» into a valuable method of measurement, we should realize that all the tests are merely an aid to guide us through a honing job. The scope of this article is to expand the arsenal of available methods for probing an edge. To use, or not to use, is a question of a personal nature."
Forget the HHT.
Shave -> is the shave good enough? yes / no.
If "No" - is your technique up to par? yes / no. (Be honest with yourself).
If you KNOW your technique up to par (stroping, lather and shaving)
Then hone or get your razor honed by a pro.
A timely thread for me. Just last night I took a Bill Ellis ATS-34 razor that I haven't shaved with in a long time. I had gotten excellent shaves with it in the past. I have the Shapton pro 30k stone but hadn't fooled with it much.
Last week I took 3 sharp razors, one of which is a tough S30V, and did some finishing on the 30k. I shaved with them one following the other on the next three consecutive days and got great shaves. So last night I took my shave ready Ellis and gave it 20 or 30 weight of the blade strokes on the 30k pro.
I could feel the blade sucking down on the stone towards the end of the session and went in and stropped. I grabbed one of my thin white hairs out of the hair brush and tried the HHT. No luck. I went to where I keep DE and SE blades and grabbed a Gem SE blade.
Tried to HHT the same hair and again no luck. Grabbed a Gillette Swede DE blade and tried. Took 4 attempts for the DE blade to pass HHT. I went in and did a cold water shave with the Ellis.
I got so close .... and smooth... on my first WTG pass that I debated on doing a second pass. Lathered up again and did the second combo WTG/ATG (depending on the area) pass. When I rinsed, applied the bay rum and rubbed it in I had a shave that was the equivalent of a Merkur Slant with a brand new Feather blade in closeness and smoothness. One of the best straight razor shaves I've ever had.
So the moral of the story is I am a believer in the efficacy of the Shapton 30k pro and I know that the HHT is a test that depends on the practitioner's particular hair. We are not all playing with the same deck of cards so to speak.
The HHT says nothing. It is a parlor trick that has very little if anything to say about how well the razor will shave.