Page 1 of 2 12 LastLast
Results 1 to 10 of 16
Like Tree34Likes

Thread: "Backwood" blade cheking some things off my list

  1. #1
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default "Backwood" blade cheking some things off my list

    Well that's how it was listed on ebay...Did a little digging and its a Packwood with a bad P stamp. Most I could find out about them was they were made in Sheffield in the 1800's and people who have them think they shave really nicely. I'd been looking for a spanish point and a heavier grind to try, so I took a bit of a chance on this one (I'm also a sucker for file work on the spine). The listing only had three photos - left/right with blade open and a close-up of the tang stamp. Handle would clearly need to go, but the blade looked like it might be ok. I couldn't really see the grind, but it appeared to be stouter than a normal hollow. I paid a little more than I was hoping as I got into a bit of a tussle in the last minute and was able to time the last second snipe correctly (if that was anyone on SRP - sorry). Still not unhappy with what I paid. It came in yesterday and like I suspected, the scales were ummm...functional. But, they looked like they were carved out of a redwood fence post with a hatchet. They were one piece, but had a pin in the wedge end One side of the pivot pin had the one and only collar and the saw they used to cut the space for the blade had to have had less than 8 teeth per inch. The pins were copper which seems a bit uncommon. The blade though was in good condition and has just a hint of a hollow grind. Some light rust and a tiny chip at the edge that should hone out. The bade is a touch under 13/16 at the heel and a touch over 13/16 at the toe and has a fairly even bevel - So my risk worked out My plan for this one is to get it apart enough to stop any active rust and then get back to a couple others I'm in the middle of. Not sure if I want to do this one in more of a period style or do something a little different. I've got a couple of scale and wedge materials I'd like to try out. With the weight of this blade I'll probably stick with lead. See what I'm in the mood for when I get to it. If anyone knows anything about Packwood razors I'd love to hear it.

    Name:  Packwood left.jpg
Views: 271
Size:  28.8 KB

    Name:  Packwood right.jpg
Views: 246
Size:  26.1 KB

    Name:  Packwood grind.jpg
Views: 235
Size:  16.6 KB Name:  Packwood scale.jpg
Views: 268
Size:  10.6 KB

    Name:  Packwood collar.jpg
Views: 237
Size:  34.2 KB
    Geezer, BobH, RezDog and 7 others like this.

  2. #2
    Senior Member jfk742's Avatar
    Join Date
    Jan 2015
    Location
    Pinole, ca
    Posts
    1,526
    Thanked: 339

    Default

    Go period, for sure, those collars are awesome, and that blade doesn’t need too much work coming considering it’s age. Nice acquisition.
    BobH, RezDog and outback like this.

  3. #3
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default

    Thanks, unfortunately the collar in the picture is the only one. I'll have to pick up some replacements. Got a link to an SRP member from an earlier post that sells some on ebay. So should be ok.
    BobH, RezDog, jfk742 and 1 others like this.

  4. #4
    Senior Member blabbermouth RezDog's Avatar
    Join Date
    Feb 2013
    Location
    Haida Gwaii, British Columbia, Canada
    Posts
    14,384
    Thanked: 4820

    Default

    I might be inclined to keep those old homemade scales, with some alterations to make them more functional, but keep them old at the same time. Those make shift scales are likely very very old too.
    jfk742 and outback like this.
    It's not what you know, it's who you take fishing!

  5. #5
    Skeptical Member Gasman's Avatar
    Join Date
    Nov 2016
    Location
    Colorado Springs
    Posts
    10,473
    Thanked: 2182

    Default

    I'm with Rez on that. If you can save the scales and thin and reshape It could turn out to be a nice set for the blade. Or another blade someday. Or, dig up some bone or horn. The blade is going to need a little work but not too bad. I think you did well. I've heard the name Packwood but don't own one. Its a personal thing but I feel an old blade doesn't need to look new and shiny. Nothing wrong with showing a little of its age.
    outback likes this.
    It's just Sharpening, right?
    Jerry...

  6. #6
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default

    I'll probably hang on to them, they're part of the razors history. Maybe someone just working with what they had to make it functional. They're thick enough that it actually helps the balance and now that I think about it redwood resists moisture pretty well. There is actually a thin layer of some type of finish on the outside, the inner cut is raw wood. The condition of the blade suggests someone took care of it, but the scales are so... well it's good enough to work. Wish I new the story of it's life, might be pretty interesting.
    jfk742 and outback like this.

  7. #7
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default

    Retaining a taste of the blades age is where I'm planning to go. Don't want full bling for this one. I'll stop when it gets to restored, not new or better than new. Hadn't really thought about re-working the original scales...that's an interesting thought. I'll mull that over, could happen.
    BobH, jfk742 and Gasman like this.

  8. #8
    Senior Member jfk742's Avatar
    Join Date
    Jan 2015
    Location
    Pinole, ca
    Posts
    1,526
    Thanked: 339

    Default

    The scales look hand carved and they cut it with a handsaw by the looks. Austin definitely makes collars that very similar to the one your razor.

  9. #9
    Senior Member JellyJar's Avatar
    Join Date
    Feb 2019
    Location
    Salida, CA
    Posts
    600
    Thanked: 94

    Default

    Yes, Austin. That's the link I got. Was a little lazy with the post and didn't go find it. Re-working the redwood is growing (there's a pun in there) on me. Not sure if it would be good though due to the open grain and being a soft wood. If I thin it, good chance it'll break not bend. I've seen some beautiful finishes on it though. I'm thinking it would need to be two piece. I've got time to give to this so...like the ideas.
    outback likes this.

  10. #10
    Senior Member blabbermouth
    Join Date
    Mar 2012
    Location
    Thunder Bay, Ontario, Canada
    Posts
    17,250
    Thanked: 3221

    Default

    You can find some info here https://sharprazorpalace.com/razors/...d-mystery.html and by typing in Packwood in the search box.

    Bob
    sharptonn and outback like this.
    Life is a terminal illness in the end

  11. The Following 3 Users Say Thank You to BobH For This Useful Post:

    Gasman (03-15-2019), JellyJar (03-15-2019), sharptonn (03-20-2019)

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •